1、third printing, November 2010AWS B2.1-1-011:2002 (R2013)An American National StandardStandard Welding ProcedureSpecification (SWPS) forShielded Metal ArcWelding of GalvanizedSteel (M-1), 10 through18 Gauge, in theAs-Welded Condition,with or without BackingSite License- STDmAWS BZ-L-EtA-224-ENGL 1999
2、 m 07842b5 051dYb4 bbd m Site License to Make Copies for Intra-Company Use This License is issued by the American Welding Society (hereinafter referred to as ?AWS?) io you (hereinafter referred to as ?Liccnsec?) based upon your application and conditions: 1. By becoming a Licensee, Licensee agrees t
3、o all the terms contained in this License. 2. Licensee is authorized to reproduce this AWS B2 Standard Welding Procedure for intra- company use only. Copies may not be made available to any individual not employed by Licensec or for any purpose unrelated to the business being conducted by Licensee.
4、3. Any reproduction must include the following copyright notice: ?Copyright by the American Welding Society. Reproduced with the express written permission of the American Welding Society.? 4. Licensee may not enter into any sublicense agreement. 5. Reproduction of this Standard Welding Procedure si
5、gnifies that you agree with the terms of the License. If you do not agree with the terms of this License please return this document, and a new document without the copyright notice will be issued. 6. The AWS B2 Standard Welding Procedures are not the subject of any warranty. AWS disclaims any liabi
6、lity arising from the use of any Standard Welding Procedure. AWS is not liable for any actual or consequential damages that may arise from the use of any Standard Welding Procedure. 7. Licensec will notify AWS in writing if it becomes aware that any employee or other party has made copies or otherwi
7、se made use of any Standard Welding Procedure contrary to the terms of the License. 8. This License contains the entire understanding as between Licensee and AWS, and any changes must be contained in a writing signed by both parties. 9. The terms of this License are governed under the laws of the St
8、ate of Florida, and both parties agree to submit to the jurisdiction of the cognizant court of law within Dade County, Florida to resolve any disputes. AWS B2.1-1-011:2002 (R2013)An American National StandardApproved by theAmerican National Standards InstituteJune 10, 2002Reaffirmed: March 11, 2013S
9、tandard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Galvanized Steel(M-1), 10 through 18 Gauge, in the As-WeldedCondition, with or without Backing2nd EditionSupersedes ANSI/AWS B2.1.011-91Prepared by theAmerican Welding Society (AWS) B2 Committee on Procedure and Performa
10、nce QualificationUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis standard contains the essential welding variables for welding galvanized steel in the thickness range of 10 through18 gauge, using manual shielded metal arc welding. It cite
11、s the base metals and operating conditions necessary to makethe weldment, the filler metal specifications, and the allowable joint designs for fillet welds and groove welds.AWS B2.1-1-011:2002 (R2013)International Standard Book Number: 0-87171-683-6American Welding Society8669 Doral Blvd., Suite 130
12、, Doral, FL 33166 2002 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaErrata: 2nd Printing, January 2005Errata: 3rd Printing, November 2010Reaffirmed: March 11, 2013iiAWS B2.1-1-011:2002 (R2013)Statement on the Use of American Welding Society StandardsAll standa
13、rds (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standar
14、ds are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other govern-mental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWSstandards must be approved by
15、the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these standards carry the full legal authority of the contract or other documentthat invokes the AWS standards. Where this contractual relationship exists, changes in or devi
16、ations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While AWS
17、administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to
18、property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this standard. AWS also makes no guarantee or warranty as to the accuracy or completeness of any informationpubl
19、ished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on
20、 his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that the use of this standard and its provisions is entrusted to appropriately qualified and competent personnel
21、.This standard may be superseded by new editions. This standard may also be corrected through publication of amendmentsor errata or supplemented by publication of addenda. Information on the latest editions of AWS standards includingamendments, errata, and addenda is posted on the AWS web page (www.
22、aws.org). Users should ensure that they have thelatest edition, amendments, errata, and addenda.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS discl
23、aims liability for the infringement ofany patent or product trade name resulting from the use of this standard.AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power to do so.Official interpretations of any of the technical requirements of this standard ma
24、y only be obtained by sending a request,in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 8669 Doral Blvd., Suite 130, Doral, FL 33166 (see Annex A).With regard to technical
25、 inquiries made concerning AWS standards, oral opinions on AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only the personal opinions of the particular individuals givin
26、g them. These individualsdo not speak on behalf of AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision a
27、t any time by the AWS B2 Committee on Procedure and Performance Qualification.It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recommen-dations, additions, or deletions) and any pertinent data that may be of use in improving this standard
28、 are required andshould be addressed to AWS Headquarters. Such comments will receive careful consideration by the AWS B2 Committeeon Procedure and Performance Qualification and the author of the comments will be informed of the Committeesresponse to the comments. Guests are invited to attend all mee
29、tings of the AWS B2 Committee on Procedure and Perfor-mance Qualification to express their comments verbally. Procedures for appeal of an adverse decision concerning all suchcomments are provided in the Rules of Operation of the Technical Activities Committee. A copy of these Rules can beobtained fr
30、om the American Welding Society, 8669 Doral Blvd., Suite 130, Doral, FL 33166.iiiAWS B2.1-1-011:2002 (R2013)Personnel (Reaffirmation)AWS B2 Committee on Procedure and Performance QualificationJ. J. Fluckiger, Chair Idaho National LaboratoryJ. L. Cooley, 1st Vice Chair J. C. joint shall be dry prior
31、to welding.Interpass Cleaning: Mechanical onlySingle or Multiple Passes: EitherBackgouging: Not required, mechanical or thermal if used.Repair: Defects in welds shall be removed by mechanical or thermalmethods. The repair cavity may differ in contour and dimensionfrom a normal joint preparation and
32、may present different restraintconditions.COMPANY NAME _In the name of the Company stated above, I accept full responsibility for the application of this SWPS for usewith:_ Dated _Fabrication Document(s): (Such as Code, Specification, or Contract Document)Date _ Approved By _ Title _Base MetalFiller
33、 Metal Amperes CurrentClassification Dia. (in) Groove Fillet Type/Polarity18 ga.17 ga.16 ga.15 ga.14 ga.13 ga.12 ga.11 ga.10 ga.E6013E6013E6013E6013E6013E6013E6013E6010E60103/32 max.3/32 max.3/32 max.3/32 max.3/32 max.3/32 max.3/32 max.1/8 max.1/8 max.506055666072657870847590809685102901105560606565
34、707075758080858590909595100DCENDCENDCENDCENDCENDCENDCENDCEPDCEPPermission to reproduce for intra-company use only is granted by the American Welding SocietyStandard Welding Procedure Specification (SWPS)Figure 1Allowable Joint DesignsAWS B2.1-1-011:2002 (R2013)Page 4 of 13Permission to reproduce for
35、 intra-company use only is granted by the American Welding SocietyGAGE: 14, 15, 16, 17, AND 18JOINT 1GAGE: 10, 11, 12, AND 13JOINT 2GAGE: 14, 15, 16, 17, AND 18JOINT 3GAGE: 10, 11, 12, AND 13JOINT 4JOINT 5JOINT 6Standard Welding Procedure Specification (SWPS)Figure 1 (Continued)Allowable Joint Desig
36、nsAWS B2.1-1-011:2002 (R2013)Page 5 of 13Permission to reproduce for intra-company use only is granted by the American Welding SocietyJOINT 7JOINT 8JOINT 9JOINT 10JOINT 11JOINT 12JOINT 13Standard Welding Procedure Specification (SWPS)Figure 1 (Continued)Allowable Joint DesignsAWS B2.1-1-011:2002 (R2
37、013)Page 6 of 13JOINT 14Metric Conversionsin mm F C0.05160.13823/321/81.3103.5102.4003.200501201049Figure 1 (Continued)Allowable Joint DesignsPermission to reproduce for intra-company use only is granted by the American Welding SocietyStandard Welding Procedure Specification (SWPS)AWS B2.1-1-011:200
38、2 (R2013)Page 7 of 13Permission to reproduce for intra-company use only is granted by the American Welding SocietyAnnex A (Informative)Guidelines for the Preparation of Technical InquiriesThis annex is not part of AWS B2.1-1-011:2002 (R2013), Standard Welding Procedure Specification (SWPS) forShield
39、ed Metal Arc Welding of Galvanized Steel (M-1), 10 through 18 Gauge, in the As-Welded Condition,with or without Backing, but is included for informational purposes only.A1. IntroductionThe American Welding Society (AWS) Board of Direc-tors has adopted a policy whereby all official interpreta-tions o
40、f AWS standards are handled in a formal manner.Under this policy, all interpretations are made by thecommittee that is responsible for the standard. Officialcommunication concerning an interpretation is directedthrough the AWS staff member who works with thatcommittee. The policy requires that all r
41、equests for aninterpretation be submitted in writing. Such requests willbe handled as expeditiously as possible, but due to thecomplexity of the work and the procedures that must befollowed, some interpretations may require considerabletime.A2. ProcedureAll inquiries shall be directed to:Managing Di
42、rectorTechnical Services DivisionAmerican Welding Society8669 Doral Blvd., Suite 130Doral, FL 33166All inquiries shall contain the name, address, and affilia-tion of the inquirer, and they shall provide enough infor-mation for the committee to understand the point ofconcern in the inquiry. When the
43、point is not clearlydefined, the inquiry will be returned for clarification. Forefficient handling, all inquiries should be typewritten andin the format specified below.A2.1 Scope. Each inquiry shall address one single provi-sion of the standard unless the point of the inquiryinvolves two or more in
44、terrelated provisions. The provi-sion(s) shall be identified in the scope of the inquiryalong with the edition of the standard that contains theprovision(s) the inquirer is addressing.A2.2 Purpose of the Inquiry. The purpose of theinquiry shall be stated in this portion of the inquiry. Thepurpose ca
45、n be to obtain an interpretation of a standardsrequirement or to request the revision of a particularprovision in the standard.A2.3 Content of the Inquiry. The inquiry should beconcise, yet complete, to enable the committee to under-stand the point of the inquiry. Sketches should be usedwhenever app
46、ropriate, and all paragraphs, figures, andtables (or annex) that bear on the inquiry shall be cited. Ifthe point of the inquiry is to obtain a revision of the stan-dard, the inquiry shall provide technical justification forthat revision.A2.4 Proposed Reply. The inquirer should, as a pro-posed reply,
47、 state an interpretation of the provision thatis the point of the inquiry or provide the wording for aproposed revision, if this is what the inquirer seeks.A3. Interpretation of Provisions of the StandardInterpretations of provisions of the standard are made bythe relevant AWS technical committee. T
48、he secretary ofthe committee refers all inquiries to the chair of theparticular subcommittee that has jurisdiction over theportion of the standard addressed by the inquiry. Thesubcommittee reviews the inquiry and the proposed replyto determine what the response to the inquiry shouldbe. Following the
49、 subcommittees development of theStandard Welding Procedure Specification (SWPS)AWS B2.1-1-011:2002 (R2013)Page 8 of 13Permission to reproduce for intra-company use only is granted by the American Welding Societyresponse, the inquiry and the response are presented tothe entire committee for review and approval. Uponapproval by the committee, the interpretati
