ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf

上传人:twoload295 文档编号:433754 上传时间:2018-11-11 格式:PDF 页数:23 大小:228.69KB
下载 相关 举报
ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf_第1页
第1页 / 共23页
ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf_第2页
第2页 / 共23页
ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf_第3页
第3页 / 共23页
ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf_第4页
第4页 / 共23页
ANSI AWS B2.1-1-201-1996 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1 P-1 S-1 Group 1 or 2) 1 8 Through 3 4 Inch Thick E6010 (.pdf_第5页
第5页 / 共23页
点击查看更多>>
资源描述

1、ANSI/AWS B2.1-1-201-96 (R2007)An American National StandardStandard Welding ProcedureSpecification (SWPS) forShielded Metal ArcWelding of CarbonSteel (M-1/P-1/S-1,Group 1 or 2),1/8 through 3/4 inchThick, E6010 (VerticalUphill) Followed byE7018 (Vertical Uphill),As-Welded Condition,Primarily PipeAppl

2、icationsSite LicenseSite License to Make Copies for Intra-Company UseThis License is issued by the American Welding Society (hereinafter referred to as “AWS”) to you(hereinafter referred to as “Licensee”) based upon your application and conditions:1. By becoming a Licensee, Licensee agrees to all th

3、e terms contained in this License.2. Licensee is authorized to reproduce this AWS B2 Standard Welding Procedure for intra-company use only. Copies may not be made available to any individual not employed byLicensee or for any purpose unrelated to the business being conducted by Licensee.3. Any repro

4、duction must include the following copyright notice: “Copyright by the AmericanWelding Society. Reproduced with the express written permission of the American WeldingSociety.”4. Licensee may not enter into any sublicense agreement.5. Reproduction of this Standard Welding Procedure signifies that you

5、 agree with the terms of theLicense. If you do not agree with the terms of this License please return this document, and anew document without the copyright notice will be issued.6. The AWS B2 Standard Welding Procedures are not the subject of any warranty. AWS disclaimsany liability arising from th

6、e use of any Standard Welding Procedure. AWS is not liable for anyactual or consequential damages that may arise from the use of any Standard Welding Procedure.7. Licensee will notify AWS in writing if it becomes aware that any employee or other party hasmade copies or otherwise made use of any Stan

7、dard Welding Procedure contrary to the terms ofthe License.8. This License contains the entire understanding as between Licensee and AWS, and any changesmust be contained in a writing signed by both parties.9. The terms of this License are governed under the laws of the State of Florida, and both pa

8、rtiesagree to submit to the jurisdiction of the cognizant court of law within Dade County, Florida toresolve any disputes.550 N.W. LeJeune Road, Miami, FL 33126ANSI/AWS B2.1-1-201-96 (R2007)An American National StandardApproved by theAmerican National Standards InstituteMay 28, 1996Standard Welding

9、ProcedureSpecification (SWPS) forShielded Metal Arc Welding of Carbon Steel(M-1/P-1/S-1, Group 1 or 2), 1/8 through3/4 inch Thick, E6010 (Vertical Uphill) Followed byE7018 (Vertical Uphill), As-Welded Condition,Primarily Pipe ApplicationsPrepared by theAmerican Welding Society (AWS) B2 Committee on

10、Welding Procedure and Performance QualificationUnder the Direction of theAWS Technical Activities CommitteeApproved by theAWS Board of DirectorsAbstractThis standard contains the essential welding variables for carbon steel in the thickness range of 1/8 through 3/4 inch,using manual shielded metal a

11、rc welding with E6010 (vertical uphill) followed by E7018 (vertical uphill). It cites thebase metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowablejoint designs for fillet and groove welds. This WPS was developed primarily for pipe applica

12、tions.Key WordsWelding Procedure Specification, base metal, allowable joint designs, filler metal, carbon steel, manual welding, shielded metal arc weldingiiANSI/AWS B2.1-1-201-96 (R2007)International Standard Book Number: 0-87171-488-4American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 1

13、996 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaReaffirmed: January 11, 2007iiiANSI/AWS B2.1-1-201-96 (R2007)Statement on the Use of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and g

14、uides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Institute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in fede

15、ral or state laws and regulations, or the regulations of other govern-mental bodies, their provisions carry the full legal authority of the statute. In such cases, any changes in those AWSstandards must be approved by the governmental body having statutory jurisdiction before they can become a part

16、ofthose laws and regulations. In all cases, these standards carry the full legal authority of the contract or other documentthat invokes the AWS standards. Where this contractual relationship exists, changes in or deviations from requirementsof an AWS standard must be by agreement between the contra

17、cting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints and interests to achieve consensus. While AWS administers the processand establishes rules to promote fairness in the developmen

18、t of consensus, it does not independently test, evaluate, orverify the accuracy of any information or the soundness of any judgments contained in its standards.AWS disclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, conse

19、quential or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this standard. AWS also makes no guaranty or warranty as to the accuracy or completeness of any informationpublished herein.In issuing and making this standard available, AWS is neither undertaking

20、 to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someoneelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent

21、 professional in determining the exercise of reasonable care in any given circumstances.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement of any patent or trade name. Use

22、rs of this standard acceptany and all liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, AWS does not monitor, police, or enforce compliance with this standar

23、d, nor does it have the power to do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standard may only be obtained by

24、sending a request,in writing, to the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Road, Miami, FL 33126. With regard totechnical inquiries made concerning AWS standards,

25、oral opinions on AWS standards may be rendered. These opinionsare offered solely as a convenience to users of this standard, and they do not constitute professional advice. Such opinionsrepresent only the personal opinions of the particular individuals giving them. These individuals do not speak on

26、behalfof AWS, nor do these oral opinions constitute official or unofficial opinions or interpretations of AWS. In addition, oralopinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS B2 Committee on Weld

27、ing Procedure and PerformanceQualification. It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn.Comments (recommendations, additions, or deletions) and any pertinent data that may be of use in improving thisstandard are required and should be addressed

28、 to AWS Headquarters. Such comments will receive careful considerationby the AWS B2 Committee on Welding Procedure and Performance Qualification and the author of the comments willbe informed of the Committees response to the comments. Guests are invited to attend all meetings of the AWS B2Committee

29、 on Welding Procedure and Performance Qualification to express their comments verbally. Procedures forappeal of an adverse decision concerning all such comments are provided in the Rules of Operation of the TechnicalActivities Committee. A copy of these Rules can be obtained from the American Weldin

30、g Society, 550 N.W. LeJeuneRoad, Miami, FL 33126.ivANSI/AWS B2.1-1-201-96 (R2007)Personnel (Reaffirmation)AWS B2 Committee on Procedure and Performance QualificationG. M. Wisbrock, Chair Lockheed Martin Missiles and Fire ControlJ. J. Fluckiger, Vice Chair Idaho National LaboratoryW. M. Ruof, Second

31、Vice Chair Bechtel Plant Machinery, IncorporatedS. Morales, Secretary American Welding SocietyT. J. Anderson ConsultantB. Beckman International Training InstituteL. P. Connor ConsultantJ. L. Cooley J C joint shall be dry prior to weldingInterpass Cleaning: Mechanical onlyBackgouging: Mechanical or t

32、hermal when required by Figure 1Single or Multiple Passes: Either. All pressure retaining welds shall be a minimum of two passes.Maximum Bead Thickness: 1/4 in.Repair: Defects in welds shall be removed by mechanical or thermal methods.The repair cavity may differ in contour and dimension from a norm

33、al jointpreparation and may present different restraint conditions. Repair of basemetal defects shall be in accordance with the requirements of the fabricationdocument(s).ANSI/AWS B2.1-1-201-96 (R2007)Page 4 of 14Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-compan

34、y use only is granted by the American Welding SocietyFigure 1Allowable Joint DesignsFILLET WELDS: All JointsGROOVE WELDS: For pipe and tubular products, see Joints 1 through 4. In addition, joints havinggroove designs resulting from end preparations conforming with ASME/ANSI B16.25, ButtweldingEnds,

35、 and prequalified joint details for complete joint penetration groove welded joints permitted byANSI/AWS D1.1, Structural Welding Code Steel, are also allowable for application with this WPS.fRrafRaJOINT 1JOINT 2ANSI/AWS B2.1-1-201-96 (R2007)Page 5 of 14Standard Welding Procedure Specification (SWPS

36、)Permission to reproduce for intra-company use only is granted by the American Welding SocietyFigure 1 (continued) Allowable Joint Designsf1f2RrabJOINT 3TYPICAL BRANCH CONNECTIONJOINT 4ffRaANSI/AWS B2.1-1-201-96 (R2007)Page 6 of 14Standard Welding Procedure Specification (SWPS)Permission to reproduc

37、e for intra-company use only is granted by the American Welding SocietyFigure 1 (continued) Allowable Joint DesignsRECOMMENDED WELDING DIMENSIONS FOR SOCKET WELDING COMPONENTS OTHER THAN FLANGESJOINT 5RECOMMENDED WELDING DIMENSIONS FOR FLANGESJOINT 6X MIN. = 1.4 Tn OR THE THICKNESS OF THE HUB, WHICH

38、EVER IS SMALLER, UNLESS OTHERWISE REQUIRED BYTHE FABRICATION DOCUMENT(S)Y MIN. = Tn OR 1/4 in., WHICHEVER IS SMALLER, UNLESS OTHERWISE REQUIRED BY THE FABRICATION DOCUMENT(S)Tn = NOMINAL PIPE WALL THICKNESSYXYXXXXXX X XYYAPPROXIMATELY1/16 in. BEFORE WELDINGTnXXANSI/AWS B2.1-1-201-96 (R2007)Page 7 of

39、 14Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-company use only is granted by the American Welding SocietyMetric Conversionsin. mm F C1/32 0.8 50 101/16 1.6 500 2603/32 2.41/8 3.25/32 4.03/16 4.81/4 6.43/4 19.01 25.4Permission to reproduce for intra-company use o

40、nly is granted by the American Welding SocietyANSI/AWS B2.1-1-201-96 (R2007)Page 8 of 14A1. IntroductionThe American Welding Society (AWS) Board of Directorshas adopted a policy whereby all official interpretationsof AWS standards are handled in a formal manner.Under this policy, all interpretations

41、 are made by thecommittee that is responsible for the standard. Officialcommunication concerning an interpretation is directedthrough the AWS staff member who works with thatcommittee. The policy requires that all requests for aninterpretation be submitted in writing. Such requests willbe handled as

42、 expeditiously as possible, but due to thecomplexity of the work and the procedures that must befollowed, some interpretations may require considerabletime.A2. ProcedureAll inquiries shall be directed to:Managing DirectorTechnical Services DivisionAmerican Welding Society550 N.W. LeJeune RoadMiami,

43、FL 33126All inquiries shall contain the name, address, and affilia-tion of the inquirer, and they shall provide enough infor-mation for the committee to understand the point ofconcern in the inquiry. When the point is not clearlydefined, the inquiry will be returned for clarification. Forefficient h

44、andling, all inquiries should be typewritten andin the format specified below.A2.1 Scope. Each inquiry shall address one single provi-sion of the standard unless the point of the inquiryinvolves two or more interrelated provisions. The provi-sion(s) shall be identified in the scope of the inquiryalo

45、ng with the edition of the standard that contains theprovision(s) the inquirer is addressing.A2.2 Purpose of the Inquiry. The purpose of theinquiry shall be stated in this portion of the inquiry. Thepurpose can be to obtain an interpretation of a standardsrequirement or to request the revision of a

46、particular pro-vision in the standard.A2.3 Content of the Inquiry. The inquiry should beconcise, yet complete, to enable the committee to under-stand the point of the inquiry. Sketches should be usedwhenever appropriate, and all paragraphs, figures, andtables (or annex) that bear on the inquiry shal

47、l be cited. Ifthe point of the inquiry is to obtain a revision of thestandard, the inquiry shall provide technical justificationfor that revision.A2.4 Proposed Reply. The inquirer should, as aproposed reply, state an interpretation of the provisionthat is the point of the inquiry or provide the word

48、ing fora proposed revision, if this is what inquirer seeks.A3. Interpretation of Provisions of the StandardInterpretations of provisions of the standard are made bythe relevant AWS technical committee. The secretary ofthe committee refers all inquiries to the chair of the par-ticular subcommittee th

49、at has jurisdiction over the por-tion of the standard addressed by the inquiry. Thesubcommittee reviews the inquiry and the proposed replyto determine what the response to the inquiry shouldbe. Following the subcommittees development of theresponse, the inquiry and the response are presented tothe entire committee for review and approval. Uponapproval by the committee, the interpretation is an officialAnnex A (Informative)Guidelines for the Preparation of Technical InquiriesThis annex is not part of ANSI/AWS B2.1-1-201-96 (R2007), Standard Welding ProcedureSpecification (SWPS) fo

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1