ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf

上传人:progressking105 文档编号:434074 上传时间:2018-11-11 格式:PDF 页数:36 大小:599.35KB
下载 相关 举报
ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf_第1页
第1页 / 共36页
ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf_第2页
第2页 / 共36页
ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf_第3页
第3页 / 共36页
ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf_第4页
第4页 / 共36页
ANSI AWWA C561-2014 Fabricated Stainless-Steel Slide Gates.pdf_第5页
第5页 / 共36页
点击查看更多>>
资源描述

1、 AWWA Standard SM Fabricated Stainless-Steel Slide Gates Effective date: Dec. 1, 2014. First edition approved by AWWA Board of Directors Jan. 18, 2004. This edition approved June 8, 2014. Approved by American National Standards Institute July 17, 2014. ANSI/AWWA C561-14 (Revision of ANSI/AWWA C561-1

2、2) Copyright 2015 American Water Works Association. All Rights Reserved. ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative informa

3、tion normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsemen

4、t of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are inten

5、ded to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association. The action b

6、ecomes effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American National Standard implies a consensus of those substantially concerned with its scope and provisions. An Ameri

7、can National Standard is intended as a guide to aid the manufacturer, the consumer, and the general public. The existence of an American National Standard does not in any respect preclude anyone, whether that person has ap - proved the standard or not, from manufacturing, marketing, purchasing, or u

8、sing products, processes, or procedures not conforming to the standard. American National Standards are subject to periodic review, and users are cautioned to obtain the latest editions. Producers of goods made in conformity with an American National Standard are encour - aged to state on their own

9、responsibility in advertising and promotional materials or on tags or labels that the goods are produced in conformity with particular American National Standards. Caution n oti Ce : The American National Standards Institute (ANSI) approval date on the front cover of this standard indicates completi

10、on of the ANSI approval process. This American National Standard may be revised or withdrawn at any time. ANSI procedures require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of ANSI approval. Purchasers of American National Standards may

11、 receive current information on all standards by calling or writing the American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036; 212.642.4900, or emailing infoansi.org. ISBN-13, print: 978-1-62576-040-1 eISBN-13, electronic: 978-1-61300-307-7DOI: http:/dx.doi.org

12、/10.12999/AWWA.C561.14 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information or retrieval system, except in the form of brief excerpts or quotations for review purpos

13、es, without the written permission of the publisher. Copyright 2014 by American Water Works Association Printed in USA hours of work by your fellow water professionals. Revenue from the sales of this AWWA material supports ongoing product development. Unauthorized distribution, either electronic or

14、photocopied, is illegal and hinders AWWAs mission to support the water community. This AWWA content is the product of thousands of Copyright 2015 American Water Works Association. All Rights Reserved. iii Committee Personnel The AWWA Subcommittee for Revision of C561, Fabricated Stainless-Steel Slid

15、e Gates, which developed this revision, had the following personnel at the time: George E. Whipps, Chair R.J. Alberts, Pasco, Wash. (AWWA) T.J. Cluin, Golden Harvest Inc., Pflugerville, Texas (AWWA) G. Boehler, Hydro Gate Corporation, Commerce City, Colo. (AWWA) S. Lamb, Nickel Institute, Huntington

16、, W. Va. (AWWA) M. Larrea, ORBINOX Valves International, San Sebastian, Guipuzcoa, Spain (AWWA) D. Niblett, JASH USA, Weldon Spring, Mo. (AWWA) R.M. Scott, Pelham, Mass. (AWWA) G.E. Whipps, Whipps Inc., Athol, Mass. (AWWA) J. Weber, MWRDGC, Chicago, Ill. (AWWA) The AWWA Standards Committee on Slide

17、Gates, which reviewed and approved this standard, had the following personnel at the time of approval: Kirk H. Hipps, Chair General Interest Members A. Ali, ADA Consulting, Vancouver, B.C., Canada (AWWA) S. Barraco, AECOM, Dallas, Texas (AWWA) M.D. Bennett, MWH Global, Cleveland, Ohio (AWWA) D.M. Fl

18、ancher,* Standards Engineer Liaison, AWWA, Denver, Colo. (AWWA) L.C. Gerbig, Lee C. Gerbig LLC, Avon, Ind. (AWWA) B. Hasanabadi, CH2M HILL, Redding, Calif. (AWWA) K.H. Hipps, CDM Smith, Chicago, Ill. (AWWA) J.E. Koch, HDR Engineering Inc., La Conner, Wash. (AWWA) J.S. Lapsley, CDM Smith, Charlotte,

19、N.C. (AWWA) C. Reames, CB and NSF/ANSI 61, Drinking Water System ComponentsHealth Effects. 4. Other references, including AWWA standards, Food Chemicals Codex, Water Chemicals Codex, and other standards considered appropriate by the state or local agency. Various certification organizations may be i

20、nvolved in certifying products in accor- dance with NSF/ANSI 61. Individual states or local agencies have authority to accept or accredit certification organizations within their jurisdictions. Accreditation of certi- fication organizations may vary from jurisdiction to jurisdiction. Annex A, “T oxi

21、cology Review and Evaluation Procedures,” to NSF/ANSI 61 does not stipulate a maximum allowable level (MAL) of a contaminant for substances not regu- lated by USEPA final maximum contaminant level (MCL). The MALs of an unspecified list of “unregulated contaminants” are based on toxicity testing guid

22、elines (noncarcino- gens) and risk characterization methodology (carcinogens). Use of Annex A procedures may not always be identical, depending on the certifier. ANSI/AWWA C561 does not address additives requirements. Thus, users of this standard should consult the appropriate state or local agency

23、having jurisdiction in order to 1. Determine additive requirements, including applicable standards. 2. Determine the status of certifications by parties offering to certify products for contact with, or treatment of, drinking water. 3. Determine current information on product certification. II. Spec

24、ial Issues. This standard has no applicable information for this section. III. Use of This Standard. It is the responsibility of the user of an AWWA standard to determine that the products described in that standard are suitable for use in the particular application being considered. * NSF Internati

25、onal, 789 North Dixboro Road, Ann Arbor, MI 48105. American National Standards Institute, 25 West 43rd Street, Fourth Floor, New York, NY 10036. Both publications available from National Academy of Sciences, 500 Fifth Street, NW, Washington, DC 20001. Copyright 2015 American Water Works Association.

26、 All Rights Reserved. x III.A. Purchaser Options and Alternatives. The foll owing items shall be provided by the purchaser: 1. Standard usedthat is, ANSI/AWWA C561, Fabricated Stainless-Steel Slide Gates, of latest revision. 2. Whether compliance with NSF/ANSI 61, Drinking Water System ComponentsHea

27、lth Effects, is required. 3. Number of units required. 4. Type of closure: conventional or flush-bottom. a. Size, by width and height of clear opening. 5. Design head measured from the surface of water/wastewater to centerline of gate, in feet (meters), for the following: a. Seating head. b. Unseati

28、ng head. 6. Operating head measured from surface of water/wastewater to centerline of gate, in feet (meters), in both seating and unseating conditions. 7. Type of lift actuator: manual, electric-motordriven, or hydraulic-cylinder. If electric-motordriven or hydraulic-cylinder, the purchaser should r

29、efer to ANSI/ AWWA C542, Electric Motor Actuators for Valves and Slide Gates, or ANSI/AWWA C541, Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates, respectively, of latest revision. 8. Conventional mounted frame or self-contained thrust reaction frame. 9. Upward- or

30、 downward-opening gate. 10. If hydraulic or pneumatic actuators are specified, provide cylinder operating media and pressure (refer to ANSI/AWWA C541, Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates, of latest revision). 11. Definition of any special design and co

31、nstruction required for conditions beyond the scope of this standard, such as throttling service, environmental condi- tions, sediment or grit exposure, and intended operation frequency and duration. 12. Frequency of operation and special operating conditions, such as ice formation. 13. An installat

32、ion-requirement drawing showing clearances, wall and floor thicknesses, details of wall pipe and thimble installation, and location of actuator. 14. Any drawings and material requirements required of the supplier or of the manufacturer (Sec. 4.1 and 4.2). 15. Details of other federal, state or provincial, and local requirements (Sec. 4.3) 16. If test records must be viewed (Sec. 4.3.2). Copyright 2015 American Water Works Association. All Rights Reserved.

展开阅读全文
相关资源
  • ANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdfANSI Z97 1-2009 American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test《建筑物中窗用玻璃材料安全性用.pdf
  • ANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdfANSI Z97 1 ERTA-2010 Re ANSI Z97 1 - 2009 Errata《修订版 美国国家标准学会Z97 1-2009标准的勘误表》.pdf
  • ANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdfANSI Z21 40 2a-1997 Gas-Fired Work Activated Air-Conditioning and Heat Pump Appliances (Same as CGA 2 92a)《燃气、工作激活空气调节和热泵器具(同 CGA 2 92a)》.pdf
  • ANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdfANSI Z124 9-2004 American National Standard for Plastic Urinal Fixtures《塑料小便器用美国国家标准》.pdf
  • ANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdfANSI Z124 4-2006 American National Standard for Plastic Water Closet Bowls and Tanks《塑料抽水马桶和水箱用美国国家标准》.pdf
  • ANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdfANSI Z124 3-2005 American National Standard for Plastic Lavatories《塑料洗脸盆用美国国家标准》.pdf
  • ANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdfANSI T1 659-1996 Telecommunications - Mobility Management Application Protocol (MMAP) RCF-RACF Operations《电信 可移动管理应用协议(MMAP) RCF-RACF操作》.pdf
  • ANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdfANSI T1 651-1996 Telecommunications – Mobility Management Application Protocol (MMAP)《电信 可移动性管理应用协议》.pdf
  • ANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdfANSI T1 609-1999 Interworking between the ISDN User-Network Interface Protocol and the Signalling System Number 7 ISDN User Part《电信 ISDN用户间网络接口协议和7号信令系统ISDN用户部分.pdf
  • ANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdfANSI T1 605-1991 Integrated Services Digital Network (ISDN) - Basic Access Interface for S and T Reference Points (Layer 1 Specification)《综合服务数字网络(ISDN) S和T基准点的.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ANSI

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1