1、 ANSI B11.18-2006 (NOTICE: This standard incorporates the safety requirements of ANSI B11.14-1996 Safety Requirements for Coil Slitting Machines ANSI B11.14-1996 was formally withdrawn on November 10, 2006 ) American National Standard for Machine Tools Safety Requirements for Machines Processing or
2、Slitting Coiled or Non-coiled Metal Secretariat and Accredited Standards Developer: AMT The Association For Manufacturing Technology 7901 Westpark Drive McLean, VA 22102 Approved: AUGUST 31, 2006 by the American National Standards Institute AMERICAN NATIONAL STANDARDS By approving this American Nati
3、onal Standard, the ANSI Board of Standards Review confirms that the requirements for due process, consensus, balance and openness have been met by AMT The Association For Manufacturing Technology (the ANSI-accredited standards developing organization). American National Standards are developed throu
4、gh a consensus process. Consensus is established when substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and
5、 that a concerted effort be made toward resolution. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While AMT administers the process and establishes procedures to promote fairness in the development of cons
6、ensus, it does not write the document and it does not independently test, evaluate or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards or guidelines. American National Standards are promulgated through ANSI for voluntary use; their e
7、xistence does not in any respect preclude anyone, whether they have approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. However, users, distributors, regulatory bodies, certification agencies and other
8、s concerned may apply American National Standards as mandatory requirements in commerce and industry. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of an American National Standard. Moreover, no person shall have the right or
9、 authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the Secretariat (AMT). AMT MAKES NO WARRANTY, EITHER EXPRESSED OR IMPLIED AS TO THE FITNESS OF MERCHANTABILITY OR ACCUR
10、ACY OF THE INFORMATION CONTAINED WITHIN THIS STANDARD, AND DISCLAIMS AND MAKES NO WARRANTY THAT THE INFORMATION IN THIS DOCUMENT WILL FULFILL ANY OF YOUR PARTICULAR PURPOSES OR NEEDS. AMT disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special
11、, indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, application or reliance on this document. AMT does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide,
12、nor does it take any position with respect to the validity of any patent rights asserted in connection with the items which are mentioned in or are the subject of this document, and AMT disclaims liability for the infringement of any patent resulting from the use of or reliance on this document. Use
13、rs of this document are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. In publishing or making this document available, AMT is not undertaking to render professional or other services
14、for or on behalf of any person or entity, nor is AMT undertaking to perform any duty owed by any person or entity tosomeone else. Anyone using this document should rely on his or her own independent judgment, or as appropriate, seek the advice of a competent professional in determining the exercise
15、of reasonable care in any given circumstances. AMT has no power, nor does it undertake to police or enforce conformance to the requirements of this document. AMT does not certify, test or inspect products, designs, or installations for safety or health purposes. Any certification or other statement
16、of conformance to any health or safety-related information in this document shall not be attributable to AMT and is solely the responsibility of the certifier or maker of the statement. NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American Na
17、tional Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. You may contact the Secretariat for current status information on this, or other B11 standards. Individuals interested in obtaining up-to-date information on standards can access this
18、 information at http:www.nssn.org (or by contacting ANSI). NSSN - A National Resource for Global Standards, provides a central point to search for standards information from worldwide sources and can connect those who seek standards to those who supply them. Published by: AMT The Association For Man
19、ufacturing Technology 7901 Westpark Drive, McLean, VA 221024206, USA Copyright 2006 by AMT- The Association For Manufacturing Technology All rights reserved. Printed in the United States of America No part of this publication may be reproduced in any form, in an electronic retrieval system or otherw
20、ise, without the prior written permission of the publisher. Table of Contents Page FOREWORD .i EXPLANATION OF THE FORMAT, AND ANSI B11 CONVENTIONS iii INTRODUCTION.iv 1 SCOPE .1 1.1 SCOPE1 1.2 INCLUDED MACHINES .1 1.3 EXCLUDED MACHINES2 2 REFERENCES .3 2.1 NORMATIVE REFERENCES .3 2.2 INFORMATIVE REF
21、ERENCES.3 3 DEFINITIONS.4 4 RESPONSIBILITY 8 4.1 SUPPLIERS RESPONSIBILITY 8 4.2 USERS RESPONSIBILITY.9 4.3 PERSONNEL RESPONSIBILITY10 5 HAZARD CONTROL 11 5.1 TASK AND HAZARD IDENTIFICATION11 5.2 RISK ASSESSMENT / RISK REDUCTION 12 6 DESIGN AND CONSTRUCTION .13 6.1 GENERAL REQUIREMENTS 14 6.1.1 Compo
22、nent design .14 6.1.2 Component selection14 6.1.3 Control of energy14 6.1.4 Elimination of, or protection from, inherent hazards .14 6.1.5 Reaching into hazard zones.15 6.1.6 Control devices.15 6.1.7 Means for limiting access to control devices 15 6.2 MECHANICAL DESIGN REQUIREMENTS 15 6.2.1 Power tr
23、ansmission components15 6.2.2 Powered moving components 15 6.2.3 Broken or falling machine components or accessories.16 6.2.4 Machine mounting 16 6.2.5 Contact with sharp edges, corners, and projections.16 6.3 ELECTRICAL DESIGN REQUIREMENTS .16 6.3.1 Stoppingperformance monitor (brake monitor) .17 6
24、.3.2 Disconnect switch.17 6.3.3 Stop functions.17 6.3.4 Emergency Stop.18 6.3.5 Stop control 20 6.3.6 Motorstart button 20 6.3.7 Motor starter.20 6.3.8 Voltage .20 6.3.9 Grounds .21 6.3.10 Control Systems.21 6.3.11 Fluctuation in or interruption of power sources.21 6.3.12 Machine initiation22 6.3.13
25、 Operator control stations 22 6.3.14 Indicators22 6.4 FLUID SYSTEM DESIGN REQUIREMENTS23 6.4.1 Supply pressure interlock .23 6.4.2 Interrupting supply pressure.23 6.4.3 Filtering and separating23 6.4.4 Pneumatic system lubrication.23 6.4.5 Compatibility.23 6.4.6 Hydropneumatic accumulators and air r
26、eceivers23 6.4.7 Working pressure .23 6.5 CONSTRUCTION .23 7 INSTALLATION, TESTING AND START-UP24 7.1 GENERAL.24 7.2 LAYOUT .24 7.3 FOUNDATION24 7.4 LIGHTING .24 7.5 GROUNDING AND SHIELDING .24 7.6 TESTING AND START-UP25 7.6.1 Procedures.25 7.6.2 Assigned personnel25 7.6.3 Safeguarding25 7.7 LOCKOUT
27、/TAGOUT .25 8 SAFEGUARDING 25 8.1 GENERAL25 8.2 SAFEGUARDING INDIVIDUALS FROM HAZARDS .26 8.3 METHODS OF SAFEGUARDING 26 8.3.1 Guards .26 8.3.2 Safeguarding devices.26 8.3.3 Awareness devices.27 8.3.4 Safe work procedures.27 8.4 COMPLEMENTARY EQUIPMENT 27 8.5 SAFETY DISTANCE 27 8.6 PERFORMANCE OF TH
28、E SAFETYRELATED FUNCTIONS28 9 OPERATION AND MAINTENANCE29 9.1 GENERAL.29 9.2 TRAINING.29 9.2.1 Hazard Identification.29 9.2.2 Lockout/tagout31 9.2.3 Personal protective equipment (PPE) .31 9.3 ALL PERSONNEL.31 9.3.1 Operating personnel.32 9.3.2 Maintenance personnel 32 9.4 SUPERVISION.33 9.5 UNAUTHO
29、RIZED USE.33 9.6 INSPECTION AND MAINTENANCE 33 9.7 REPAIRS33 ANNEX A FIGURES AND DESCRIPTIONS.34 ANNEX B LIST OF HAZARDS .49 ANNEX C PERFORMANCE OF THE SAFETY-RELATED FUNCTIONS 52 ANNEX D GUARDING AND AWARENESS BARRIER SAFE OPENINGS53 ANNEX E LEGEND PLATE55 ANNEX F GUIDELINES FOR OPERATOR TRAINING56
30、 ANNEX G BANDING AND UNBANDING OF COILS AND CONSTRAINT OF PARTIAL COILS57 i FOREWORD (This Foreword is informative and not part of the requirements of American National Standard B11.18-2006.) The primary objective of this standard is to eliminate, control or reduce hazards to individuals associated
31、with metal, sheet, strip or plate processing systems by establishing requirements for the design, construction, installation, commissioning, operation, maintenance and decommissioning of these machines. To accomplish this objective, responsibilities have been assigned to the supplier (e.g., manufact
32、urer, modifier, distributor, rebuilder and integrator), the user, and individuals in the working environment. The words “safe“ and “safety“ are not absolutes. An element of safety is attitude. While the objective of this standard is to eliminate, control, or reduce hazards, this standard recognizes
33、that hazards cannot be practically reduced to zero in any human activity. This standard is not intended to replace good judgment, proper training, and personal responsibility. Operator skill, job monotony, fatigue, and experience are safety factors that should be considered by the user. The original
34、 B11.18 Standard was approved in 1985 and revised and approved again in 1992. B11.18 was then reaffirmed in 1997. This current standard began revision in 2004, and with the approval of the B11 Accredited Standards Committee, includes and incorporates the safety requirements of coil slitting machines
35、 the subject matter of ANSI B11.141996. B11.14 will be formally withdrawn as an American National Standard upon ANSI approval of this revised standard as an American National Standard. Technology for metal/sheet/strip/plate processing systems from coiled or non-coiled configurations is continuously
36、evolving. This standard reflects the most commonly used and time-tested state of the art at the time of its approval. The inclusion or omission of language relative to any evolving technology, either in the requirements or explanatory area of this standard, in no way infers acceptance or rejection o
37、f such technologies. This standard was processed and submitted for ANSI approval by the B11 Accredited Standards Committee on safety standards for machine tools. Committee approval of this standard does not necessarily imply that all committee members voted for its approval. At the time this documen
38、t was approved as an American National Standard, the ANSI B11 Accredited Standards Committee was composed of the following member organizations: Inquiries with respect to the application of the substantive requirements of this standard and suggestions for its improvement are welcomed and are to be s
39、ent to AMT - The Association For Manufacturing Technology, 7901 Westpark Drive, McLean, Virginia 22102-4206. Attention: B11 Secretariat. Effective Date The following is informative guidance only, and not a normative part of this standard. This Subcommittee recognizes that some period of time after t
40、he approval date on the title page of this document is necessary for suppliers and users to develop new designs, or modify existing designs or manufacturing processes in order to incorporate the new or revised requirements of this standard into their product development or production system. This Su
41、bcommittee recommends that suppliers complete and implement design changes for new machines within 30 months of the approval of this standard. For existing or modified machines, this Subcommittee recommends that users should confirm that the equipment / process has tolerable risk using generally rec
42、ognized risk assessment methods within 30 months of the approval date of this standard. If the risk assessment shows that modification(s) is necessary, refer to the requirements of this standard to implement protective measures for appropriate risk reduction. ii B11 Accredited Standards Committee RO
43、STER John W. Russell,PE, CSP Chairman Gary D. Kopps, Vice-Chairman David A. Felinski, Secretary Organizations Represented Name of Representative Delegate Alternate Aerospace Industries Association of America Willard J. Wood, ARM Lance E. Chandler Aluminum Extruders Council Melvin Mitchell Douglas Ha
44、rt American Society of Safety Engineers Bruce W. Main, PE, CSP George Karosas, PE, CSP Association For Manufacturing Technology Russell A. Bensman Daniel P. Soroka Alan Metelsky Automotive Industry Action Group Ronald Tillinger Kent Lenzen The Boeing Company Don R. Nelson Robert J. Eaker, PE, CSP Ca
45、n Manufacturers Institute Geoffrey Cullen Jenny Day Deere and Company Gary D. Kopps Ellen Blanshan General Motors Corporation Michael Taubitz Dallas Gatlin Metal Building Manufacturers Association Charles M. Stockinger Charles E. Praeger Metal Powder Industries Federation Dennis R. Cloutier, CSP Ter
46、esa F. Stillman National Institute for Occupational Safety and Health Richard S. Current, PE James R. Harris, MS, PE Occupational Safety no deviation is permitted. The term “SHOULD” denotes a recommendation, a practice or condition among several alternatives, or a preferred method or course of actio
47、n. Similarly, the term “CAN” denotes a possibility or capability, whether physical or causal, and the term “MAY” denotes a permissible course of action within the limits of the standard. B11 conventions: Operating rules (safe practices) are not included in either column of this standard unless they
48、are of such nature as to be vital safety requirements, equal in weight to other requirements, or guides to assist in conformance to the standard. The B11 series of standards do not use the term “and/or” but instead, the term “OR” is used as an inclusive disjunction, meaning one or the other or both.
49、 A distinction between the terms “individual” and “personnel” is drawn. Individual includes personnel (employees, subcontractors, consultants, or other contract workers under the indirect control of the supplier or user) but also encompasses persons who are not under the direct or indirect control of the supplier or user (e.g., visitors, vendors, etc.). Gauge refers to a measuring or testing instrument; gage refers to a limiting device (e.g., backgage). Suggestions for improvement of this standard will be welcome. They s
