1、 ANSI/ESD S1.1-2013 Revision of ANSI/ESD S1.1-2006 For the Protection of Electrostatic Discharge Susceptible Items Wrist Straps Electrostatic Discharge Association 7900 Turin Road, Bldg. 3 Rome, NY 13440 An American National Standard Approved July 29, 2013ANSI/ESD S1.1-2013 ESD Association Standard
2、for the Protection of Electrostatic Discharge Susceptible Items - Wrist Straps Approved July 27, 2011 ESD Association ANSI/ESD S1.1-2013 Electrostatic Discharge Association (ESDA) standards and publications are designed to serve the public interest by eliminating misunderstandings between manufactur
3、ers and purchasers, facilitating the interchangeability and improvement of products and assisting the purchaser in selecting and obtaining the proper product for his particular needs. The existence of such standards and publications shall not in any respect preclude any member or non-member of the A
4、ssociation from manufacturing or selling products not conforming to such standards and publications. Nor shall the fact that a standard or publication is published by the Association preclude its voluntary use by non-members of the Association whether the document is to be used either domestically o
5、r internationally. Recommended standards and publications are adopted by the ESDA in accordance with the ANSI Patent policy. Interpretation of ESDA Standards: The interpretation of standards in-so-far as it may relate to a specific product or manufacturer is a proper matter for the individual compan
6、y concerned and cannot be undertaken by any person acting for the ESDA. The ESDA Standards Chairman may make comments limited to an explanation or clarification of the technical language or provisions in a standard, but not related to its application to specific products and manufacturers. No other
7、person is authorized to comment on behalf of the ESDA on any ESDA Standard. THE CONTENTS OF ESDAS STANDARDS AND PUBLICATIONS ARE PROVIDED “AS-IS,” AND ESDA MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESSED OR IMPLIED, OF ANY KIND WITH RESPECT TO SUCH CONTENTS. ESDA DISCLAIMS ALL REPRESENTATIONS AND
8、WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NON-INFRINGEMENT. ESDA STANDARDS AND PUBLICATIONS ARE CONSIDERED TECHNICALLY SOUND AT THE TIME THEY ARE APPROVED FOR PUBLICATION. THEY ARE NOT A SUBSTITUTE FOR A PRODUCT SELLER
9、S OR USERS OWN JUDGEMENT WITH RESPECT TO ANY PARTICULAR PRODUCT DISCUSSED, AND ESDA DOES NOT UNDERTAKE TO GUARANTEE THE PERFORMANCE OF ANY INDIVIDUAL MANUFACTURERS PRODUCTS BY VIRTUE OF SUCH STANDARDS OR PUBLICATIONS. THUS, ESDA EXPRESSLY DISLAIMS ANY RESPONSIBILITY FOR DAMAGES ARISING FROM THE USE,
10、 APPLICATION, OR RELIANCE BY OTHERS ON THE INFORMATION CONTAINED IN THESE STANDARDS OR PUBLICATIONS. NEITHER ESDA, NOR ITS MEMBERS, OFFICERS, EMPLOYEES OR OTHER REPRESENTATIVES WILL BE LIABLE FOR DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, THE USE OR MISUSE OF ESDA STANDARDS OR PUBLICATIONS, EVEN
11、 IF ADVISED OF THE POSSIBILITY THEREOF. THIS IS A COMPREHENSIVE LIMITATION OF LIABILITY THAT APPLIES TO ALL DAMAGES OF ANY KIND, INCLUDING WITHOUT LIMITATION, LOSS OF DATA, INCOME OR PROFIT, LOSS OF OR DAMAGE TO PROPERTY AND CLAIMS OF THIRD PARTIES. Published by: Electrostatic Discharge Association
12、7900 Turin Road, Bldg. 3 Rome, NY 13440 Copyright 2013 by ESD Association All rights reserved No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America ISBN
13、: 1-58537-242-0CAUTION NOTICE DISCLAIMER OF WARRANTIES DISCLAIMER OF GUARANTY LIMITATION ON ESDAs LIABILITY ANSI/ESD S1.1-2013 i (This foreword is not part of ESD Association Standard ANSI/ESD S1.1-2013) FOREWORD This standard1has been developed to establish test methods for evaluating the electrica
14、l and mechanical attributes of wrist straps used in an electrostatic discharge control program. Wrist straps are intended to connect the user to ESD ground reference, thus preventing electrostatic charge on a users body from attaining a level that may damage ESD susceptible devices or assemblies. Te
15、st methods and performance limits for evaluation, acceptance, and system test are provided. Application and construction guidance is included in the annexes. This document is reformatted from EOS/ESD S1-1987 using improved test methods. This document was originally designated ESD S1.1-1998 and appro
16、ved on October 4, 1998. ESD S1.1-1998 was reaffirmed, redesignated ANSI/ESD S1.1-2006, and was approved on February 26, 2006. ANSI/ESD S1.1-2013 is a revision of ANSI/ESD S1.1-2006 and was approved on July 27, 2011. At the time ANSI/ESD S1.1-2013 was prepared, the 1.0 Wrist Strap Subcommittee had th
17、e following members: Brent Beamer, Chair 3M Eugene Chase Electro-Tech Systems, Inc. Cheryl Checketts R Ph: 315-339-6937; FAX: 315-339-6793; www.esda.org ANSI/ESD S1.1-2013 2 5.0 TESTING LEVELS AND PERFORMANCE LIMITS This standard specifies different types of testing for wrist straps. Tables 1, 2, an
18、d 3 detail the three types of testing with the required limits and section references to test methods. The methods provide appropriate tests for the different levels of wrist strap examination. Product qualification tests are for evaluating the performance of wrist straps. Acceptance tests provide m
19、ethods for incoming goods inspection. System test measures the wrist strap system electrical resistance. See ESD TR53 Compliance Verification of ESD Protective Equipment and Materials for information regarding compliance verification. Table 1. Product Qualification Electrical Required Limit Test Sec
20、tionWrist Strap Continuity and Resistance 1 megohm 20%, or user defined value 6.1 Wristband (Cuff) Resistance Interior: Wristband Resistance Exterior: 0.45 kg (1 lb), 2.3 kg (5 lb) and 66% of cord strength 6.5 Ground Cord Extendibility Extension to manufacturers specified length with no continuity l
21、oss. 6.6 Bending Flex Life 16,000 cycles 6.7 Marking Required Limit Test SectionManufacturers Identification Logo and/or name 6.8 Identification of Non-Standard Resistance Value Red feature. Value Marked. 6.9 Table 2. Acceptance Testing Electrical Required Limit Test SectionWrist Strap Resistance 1
22、megohm 20%, or user defined value. 6.10 Marking Required Limit Test SectionManufacturers Identification Logo and/or name 6.8 Identification of Non-Standard Resistance Value Red feature. Value Marked. 6.9 ANSI/ESD S1.1-2013 3 Table 3. System Test Electrical Required Limit Test Section Wrist Strap Sys
23、tem Resistance “pass” or 0.45 kg (1 lb) but 10 megohms. ANSI/ESD S1.1-2013 13 (This annex is not part of ESD Association Standard ANSI/ESD S1.1-2013) ANNEX C (INFORMATIVE) - CORD BENDING FLEX LIFE The Section 5.7 - Bending Flex Life test limit is arbitrary, but it is intended to provide an indicatio
24、n of cord durability. Some users may have applications that need a higher bending flex life test limit. The strain relief connection of the resistor to the cord conductor is the most likely failure point. ANSI/ESD S1.1-2013 14 (This annex is not part of ESD Association Standard ANSI/ESD S1.1-2013) A
25、NNEX D (INFORMATIVE) ANSI/ESD S1.1-2013 REVISION HISTORY 1. Section 1.2 - Verification testing was moved to ESD TR53. 2. Table 1 - Wrist strap system limit was changed from 10 megohms to 35 megohms. 3. Section 6.9 - Added red color noting where non-standard resistance value is located on the cord. This accommodates aesthetic requests for red colored wristbands with the standard resistance value. 4. Changed “cuff” to “wristband” throughout the document.
