1、American National Standard forSealless, Magnetically Driven Rotary Pumpsfor Nomenclature, Definitions,Application, Operation, and TestANSI/HI 4.1 - 4.6 -2017This page intentionally blank.ANSI/HI 4.14.6-2017American National Standard forSealless, Magnetically Driven Rotary Pumpsfor Nomenclature, Defi
2、nitions,Application, Operation, and TestSponsorHydraulic Institute www.Pumps.org Approved May 23, 2017American National Standards Institute, Inc.Hydraulic Institute Standards, Copyright 1997-2017, All Rights ReservedApproval of an American National Standard requires verification by ANSI that therequ
3、irements for due process, consensus and other criteria for approval have been metby the standards developer.Consensus is established when, in the judgement of the ANSI Board of StandardsReview, substantial agreement has been reached by directly and materially affectedinterests. Substantial agreement
4、 means much more than a simple majority, but not nec-essarily unanimity. Consensus requires that all views and objections be considered,and that a concerted effort be made toward their resolution.The use of American National Standards is completely voluntary; their existence doesnot in any respect p
5、reclude anyone, whether he has approved the standards or not,from manufacturing, marketing, purchasing, or using products, processes, or proce-dures not conforming to the standards.The American National Standards Institute does not develop standards and will in nocircumstances give an interpretation
6、 of any American National Standard. Moreover, noperson shall have the right or authority to issue an interpretation of an AmericanNational Standard in the name of the American National Standards Institute. Requestsfor interpretations should be addressed to the secretariat or sponsor whose nameappear
7、s on the title page of this standard.CAUTION NOTICE: This American National Standard may be revised or withdrawn atany time. The procedures of the American National Standards Institute require thataction be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers ofAmerican Nati
8、onal Standards may receive current information on all standards by call-ing or writing the American National Standards Institute.Published ByHydraulic Institute6 Campus Drive, First Floor NorthParsippany, NJ 07054-4406www.Pumps.org Copyright 2017 Hydraulic InstituteAll rights reserved.No part of thi
9、s publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publisher.Printed in the United States of AmericaISBN 978-1-935762-66-9AmericanNationalStandardRecycledpaperHydraulic Institute Standards, Copyright 1997-2017, All Rig
10、hts ReservediiiContentsPageForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v4 Sealless, magnetically driven rotary pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11、. . . . . . . . . . . . . . . . . . 14.0 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1 Types and nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12、 . . . . . . . . . . . . . . . . . . . . . . 14.1.1 Objective. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13、 . . . . . . . . . . . . . . . . . . . . . . . . . . 14.1.3 Types of magnetic drive configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14、. . . . . . . . . . . . . . . . . . . . . . . . . 74.2.1 Close coupled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.2.2 Coercive force. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15、. . . . . . . . . . . . . . . . . . . . . . . . . . 74.2.3 Containment shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.4 Cooling liquid flow path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16、. . . . . . . . . . . . . . . . . . . . . . . . 84.2.5 Curie temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.6 Decoupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、. . . . . . . . . . . . . . . . . . . . . . . . 84.2.7 Demagnetization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.8 Dephase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18、 . . . . . . . . . . . . . . . . . . . . . . . . 84.2.9 Eddy current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.10 Eddy current drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、 . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.11 Eddy current losses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.12 Encapsulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、 . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.13 Flux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.2.14 Flux density. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.15 Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.16 Gauss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.17 Gilbert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.18 Hydraulic parasitic losses . . . . . . . . . . . . . . .
23、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.19 Hydrostatic test pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.20 Hysteresis . . . . . . . . . . . . . . . . . . . . . . . . . .
24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.21 Inner magnet assembly (driven) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.22 Intrinsic induction . . . . . . . . . . . . . . . . . . . . . . . .
25、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2.23 Magnet (permanent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2.24 Magnetic coupling. . . . . . . . . . . . . . . . . . . . . . . . . .
26、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2.25 Magnetic drive pump/magnetic coupling pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2.26 Magnetic materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27、 . . . . . . . . . . . . . . . . . . . . . . . 104.2.27 Maximum working pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2.28 Maxwell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、 . . . . . . . . . . . . . . . . . . . . 104.2.29 Negative thrust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.2.30 Oersted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、 . . . . . . . . . . . . . . . . . . . . . . . 114.2.31 Outer magnetic assembly (driver). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2.32 Permeability (magnetic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30、 . . . . . . . . . . . . . . . 114.2.33 Permeance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2.34 Pole. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . . . . . . . . . . . . . . . . . 114.2.35 Positive thrust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2.36 Reluctance (R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32、. . . . . . . . . . . . . . . . . . . . . 114.2.37 Secondary containment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2.38 Secondary containment system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33、 . . . . . . . . . . . 114.2.39 Secondary control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.2.40 Secondary control system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34、. . . . . . . 11Hydraulic Institute Standards, Copyright 1997-2017, All Rights Reservediv4.2.41 Separately coupled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.2.42 Shell . . . . . . . . . . . . . . . . . . . . . . . . .
35、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.2.43 Slip, hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.2.44 Slip, magnetic . . . . . . . . . . . . . . . .
36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.2.45 Synchronous drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.3 Design and application . . . . . . . . . . . . . .
37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.3.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124.3.2 Sealless pump overview . . . . . . . . . .
38、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134.3.3 Application considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144.3.4 Life cycle cost evaluation . . . . . . . . . . . . . . .
39、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.3.5 Selection guideline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204.3.6 Supplemental data sheet . . . . . . . . . . . . . . . . . . . .
40、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.4 Installation, operation, and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.4.1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.4.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234.4.3 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254.5 Reference and source material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264.5.1 Hydraulic Institute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264.5.2 Motor 2) assumes any liabilities with respect to the use of, or for damages resulting from the use of, any informa-tion, apparatus, method, or process disclosed in this guideline. The Hydraulic Institute is in no way responsible f
44、orHydraulic Institute Standards, Copyright 1997-2017, All Rights Reservedviany consequences to an owner, operator, user, or anyone else resulting from reference to the content of this docu-ment, its application, or use.This document does not contain a complete statement of all requirements, analyses
45、, and procedures necessary toensure safe or appropriate selection, installation, testing, inspection, and operation of any pump or associatedproducts. Each application, service, and selection is unique with process requirements that shall be determined bythe owner, operator, or its designated repres
46、entative.Units of measurementMetric units of measurement are used, and corresponding US customary units appear in parentheses. Charts,graphs, and sample calculations are also shown in both metric and US customary units. Because values given inmetric units are not exact equivalents to values given in
47、 US customary units, it is important that the selected unitsof measure to be applied be stated in reference to this standard. If no such statement is provided, metric units shallgovern.ConsensusConsensus for this American National Standard was achieved by use of the canvass method. The following org
48、ani-zations, recognized as having an interest in the standardization of pumps, were contacted prior to the approval ofthis revision of the standard. Inclusion in this list does not necessarily imply that the organization concurred with thesubmittal of the proposed standard to ANSI.Colfax Fluid Handl
49、ing/Imo Pump DuPont Company ekwestrel corpFluid Sealing AssociationKemet Inc.Leistritz Advanced Technologies Corp. LVVWD- Las Vegas Valley Water DistrictPatterson Pump Company Pentair Rotating Equipment Repair, Inc SulzerCommittee listAlthough this standard was processed and approved for submittal to ANSI by the canvass method, a working com-mittee met many times to facilitate its development. At the time it was developed, the committee had the followingmembers:Chair - Randy Bennett, Leistritz Advanced Technologies Corp.Vice-Chair - Richard Foster, Blackmer, Inc.Committee members Co
