1、 TIA-102.AABC-D (Revision of TIA-102.AABC-C) April 2015Project 25 Trunking Control Channel Messages ANSI/TIA-102.AABC-D-2015 APPROVED: FEBRUARY 26, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactu
2、rers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or n
3、on-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by
4、 TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all saf
5、ety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this docume
6、nt are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.AABC-D, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio TR-8.10 Subcommittee on Trunking and C
7、onventional Control). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or
8、 call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (
9、including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/
10、www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed i
11、n the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR c
12、onsisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scop
13、e or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant o
14、r represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, developme
15、nt or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation
16、 to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending p
17、atent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the content
18、s of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURAC
19、Y OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRA
20、NTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT
21、OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT
22、, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIO
23、NS. TIA-102.AABC-D Foreword (This foreword is not part of this standard.) This document has been submitted to APCO/NASTD/FED by the Telecommunications Industry Association (TIA), as provided for in a Memorandum of Understanding (MOU) dated December 1993. That MOU provides that APCO/NASTD/FED will de
24、vise a Common System Standard for digital public safety communications (the Standard), and that TIA shall provide technical assistance in the development of documentation for the Standard. This document has been developed with inputs from the APCO/TIA Project 25 Interface Committee (APIC), the APIC
25、Trunking Task Group, and TIA Industry members. This document is being published because it is felt that there is an urgent need for technical information on the emerging digital techniques for Land Mobile Radio Service. This document describes the control channel messages for trunked systems meeting
26、 the Project 25 requirements. These definitions are necessary to insure interoperability of trunked radio units. This document includes normative annexes A through C, and informative annexes D through F. As other documents describing the trunking protocol are developed, this document will be subject
27、 to change, Additional reason codes and additional messages covering working channel maintenance may be needed. Some efforts have been made to ensure accuracy, but it should be understood that conformance tests remain to be developed and proven. This document is a standard. It presents an overview o
28、f trunking messages which was recommended by TIA to APCO/NASTD/FED as being suitable for use as part of their standard for a digital public safety radio system (Project 25). TIA-102.AABC-D i TABLE OF CONTENTS 1.0 Introduction 1 1.1 Scope . 1 1.2 Revision History . 1 1.3 References. 2 1.3.1 Normative
29、 References 2 1.3.2 Informative References 3 1.4 Number Nomenclature . 3 1.5 Reserved . 3 1.6 Abbreviations and Acronyms . 4 1.7 Obsolescence 4 2.0 Trunking Packet Description 5 2.1 Single Block Packet Structure 5 2.2 Multiple Block Packet Structure . 7 2.3 Field Definitions . 8 2.3.1 Additional Inf
30、ormation . 9 2.3.2 Additional Information Valid Flag (AIV) . 9 2.3.3 Announcement Group Address 9 2.3.4 Answer Response 9 2.3.5 Base Frequency . 9 2.3.6 BW . 10 2.3.7 BW VU . 10 2.3.8 Call Timer . 10 2.3.9 Channel 10 2.3.10 Channel Spacing 12 2.3.11 Data Access Control (DAC) 12 2.3.12 Data Service O
31、ptions . 12 2.3.13 Digit 13 2.3.14 Digit Count . 13 2.3.15 Extended Function . 14 2.3.16 Group Address . 15 2.3.17 Group ID . 16 2.3.18 Home System . 16 2.3.19 Identifier . 17 2.3.20 Location Registration Area (LRA) . 17 2.3.21 Message . 17 2.3.22 Reason Code . 17 2.3.23 RF Sub-System ID . 17 2.3.24
32、 Service Options 18 2.3.25 Service Type 19 2.3.26 Site ID 19 2.3.27 Source Address 20 2.3.28 Source ID . 20 TIA-102.AABC-D ii 2.3.29 Status 20 2.3.30 Subscriber Unit Address . 21 2.3.31 System ID . 21 2.3.32 System Service Class . 22 2.3.33 Target Address . 22 2.3.34 Target ID . 22 2.3.35 Transmit O
33、ffset . 22 2.3.36 Transmit Offset VU . 23 2.3.37 WACN ID 23 2.3.38 Tone Signal . 24 2.3.39 Capabilities Field . 24 2.3.40 Channel Type 25 2.3.41 Transmit Offset TDMA 25 3.0 Categorization 27 4.0 Voice Service 28 4.1 Voice Service ISPs . 28 4.1.1 Group Voice Service Request (GRP_V_REQ) 29 4.1.2 Unit-
34、to-Unit Voice Service Request (UU_V_REQ) 30 4.1.3 Unit-to-Unit Voice Service Answer Response (UU_ANS_RSP) 32 4.1.4 Telephone Interconnect Request-Explicit Dialing (TELE_INT_DIAL_REQ) 34 4.1.5 Telephone Interconnect Request-Implicit Dialing (TELE_INT_PSTN_REQ) 37 4.1.6 Telephone Interconnect Answer R
35、esponse (TELE_INT_ANS_RSP) 38 4.2 Voice Service OSPs . 39 4.2.1 Group Voice Channel Grant (GRP_V_CH_GRANT) . 40 4.2.2 Group Voice Channel Grant Update (GRP_V_CH_GRANT_UPDT) 42 4.2.3 Group Voice Channel Update-Explicit (GRP_V_CH_GRANT_UPDT_EXP) . 43 4.2.4 Unit-to-Unit Answer Request (UU_ANS_REQ) . 44
36、 4.2.5 Unit-to-Unit Voice Service Channel Grant (UU_V_CH_GRANT) 46 4.2.6 Telephone Interconnect Voice Channel Grant (TELE_INT_CH_GRANT) 49 4.2.7 Telephone Interconnect Answer Request (TELE_INT_ANS_REQ) 51 4.2.8 Unit-to-Unit Voice Channel Grant Update (UU_V_CH_GRANT_UPDT) . 52 4.2.9 Tel. Interconnect
37、 Channel Grant Update (TELE_INT_CH_GRANT_UPDT) . 55 5.1 Data Service ISPs. 57 5.1.1 Individual Data Service Request (IND_DATA_REQ) - OBSOLETE . 58 5.1.2 Group Data Service Request (GRP_DATA_REQ) OBSOLETE 60 5.1.3 SNDCP Data Channel Request (SN-DATA_CHN_REQ) 61 5.1.4 SNDCP Data Page Response (SN-DATA
38、_PAGE_RES) 62 5.1.5 SNDCP Reconnect Request (SN-REC_REQ) 63 5.2 Data Service OSPs . 64 5.2.1 Individual Data Channel Grant (IND_DATA_CH_GRANT) ) - OBSOLETE 65 5.2.2 Group Data Channel Grant (GRP_DATA_CH_GRANT) - OBSOLETE 68 5.2.3 Group Data Channel Announcement (GRP_DATA_CH_ANN) - OBSOLETE70 5.2.4 G
39、roup Data Channel Announcement Explicit (GRP_DATA_CH_ANN_EXP) - OBSOLETE . 71 TIA-102.AABC-D iii 5.2.5 SNDCP Data Channel Grant (SN-DATA_CHN_GNT) 72 5.2.6 SNDCP Data Page Request (SN-DATA_PAGE_REQ) 73 5.2.7 SNDCP Data Channel Announcement - Explicit (SN-DATA_CHN_ANN_EXP)74 6.0 Control and Status Ser
40、vices. 75 6.1 Control and Status ISPs . 75 6.1.1 Acknowledge Response - Unit (ACK_RSP_U) . 76 6.1.2 Authentication Query (AUTH_Q) - OBSOLETE . 78 6.1.3 Authentication Response (AUTH_RSP) - OBSOLETE 80 6.1.4 Call Alert Request (CALL_ALRT_REQ) . 82 6.1.5 Cancel Service Request (CAN_SRV_REQ) . 84 6.1.6
41、 Emergency Alarm Request (EMRG_ALRM_REQ) . 86 6.1.7 Extended Function Response (EXT_FNCT_RSP) . 87 6.1.8 Group Affiliation Query Response (GRP_AFF_Q_RSP) 89 6.1.9 Group Affiliation Request (GRP_AFF_REQ) 90 6.1.10 Identifier Update Request (IDEN_UP_REQ) 92 6.1.11 Message Update Request (MSG_UPDT_REQ)
42、 . 93 6.1.12 Protection Parameter Request (P_PARM_REQ) - OBSOLETE 95 6.1.13 Status Query Request (STS_Q_REQ) . 96 6.1.14 Status Query Response (STS_Q_RSP) . 98 6.1.15 Status Update Request (STS_UPDT_REQ) 100 6.1.16 Unit Registration Request (U_REG_REQ) . 102 6.1.17 De-Registration Request (U_DE_REG_
43、REQ) 103 6.1.18 Location Registration Request (LOC_REG_REQ) . 104 6.1.19 Radio Unit Monitor Request (RAD_MON_REQ) 107 6.1.21 Roaming Address Response (ROAM_ADDR_RSP) 112 6.1.22 Authentication FNE Result (AUTH_FNE_RST) 116 6.1.23 Authentication Response (AUTH_RESP) . 118 6.1.24 Authentication Respons
44、e Mutual (AUTH_RESP_M) 122 6.1.25 Authentication SU Demand (AUTH_SU_DMD) . 124 6.1.26 Radio Unit Monitor Enhanced Request (RAD_MON_ENH_REQ) 126 6.2 Control and Status OSPs . 130 6.2.1 Acknowledge Response - FNE (ACK_RSP_FNE) . 131 6.2.2 Adjacent Status Broadcast (ADJ_STS_BCST) 135 6.2.3 Authenticati
45、on Command (AUTH_CMD) - OBSOLETE . 137 6.2.4 Call Alert (CALL_ALRT) . 138 6.2.5 Deny Response (DENY_RSP) . 141 6.2.6 Extended Function Command (EXT_FNCT_CMD) 142 6.2.7 Group Affiliation Query (GRP_AFF_Q) 144 6.2.8 Group Affiliation Response (GRP_AFF_RSP) . 145 6.2.9 Identifier Update (IDEN_UP) 148 6
46、.2.10 Message Update (MSG_UPDT) . 150 6.2.11 Network Status Broadcast (NET_STS_BCST) . 153 6.2.12 Protection Parameter Broadcast (P_PARM_BCST) - OBSOLETE 155 6.2.13 Protection Parameter Update (P_PARM_UPDT) - OBSOLETE 157 6.2.14 Queued Response (QUE_RSP) . 158 TIA-102.AABC-D iv 6.2.15 RFSS Status Br
47、oadcast (RFSS_STS_BCST) . 160 6.2.16 Secondary Control Channel Broadcast (SCCB) 162 6.2.17 Status Query (STS_Q) 163 6.2.18 Status Update (STS_UPDT) . 166 6.2.19 System Service Broadcast (SYS_SRV_BCST) . 169 6.2.20 Unit Registration Command (U_REG_CMD) 172 6.2.21 Unit Registration Response (U_REG_RSP
48、) . 173 6.2.22 De-Registration Acknowledge (U_DE_REG_ACK) . 175 6.2.23 Location Registration Response (LOC_REG_RSP) . 176 6.2.24 Radio Unit Monitor Command (RAD_MON_CMD) . 177 6.2.25 Roaming Address Command (ROAM_ADDR_CMD) 180 6.2.26 Roaming Address Update (ROAM_ADDR_UPDT) . 181 6.2.27 Time and Date
49、 Announcement (TIME_DATE_ANN) 185 6.2.28 Secondary Control Channel Broadcast - Explicit (SCCB_EXP) 188 6.2.29 Identifier Update (IDEN_UP_VU) for VHF/UHF Bands . 189 6.2.30 Authentication Demand (AUTH_DMD) 191 6.2.31 Authentication FNE Response (AUTH_FNE_RESP) 193 6.2.32 Identifier Update for TDMA (IDEN_UP_TDMA) 196 6.2.33 Synchronization Broadcast (SYNC_BCST) . 199 6.2.34 Radio Unit Monitor Enhanced Command (RAD_MON_ENH_CMD) . 202 Annex A. Cancel Reason Codes (Normative) . 206 Annex B. Deny Response Reason Codes (Normative) 207 Annex C. Queued Response Reason Codes (Normative) 208
