1、 TIA-664.000-B-3E (Addendum to TIA-664.000-B-2E) October 2007Wireless Features Description: Addendum 3 ANSI/TIA-664.000-B-3E-2007 APPROVED: OCTOBER 4, 2007 REAFFIRMED: JANUARY 22, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating mis
2、understandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any
3、respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards
4、 and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard doe
5、s not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (Fro
6、m Project No. SP-3-4652.000-RV2-AD3-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standa
7、rds development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of
8、 patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validit
9、y of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent
10、that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or public
11、ation of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigat
12、e the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Informatio
13、n as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, te
14、st or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FO
15、R A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APP
16、LICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF
17、THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), P
18、RODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-664.000-B-3E 1 2 3 4 5 6 7 8 9 10 11 12 13 1
19、4 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 000-i Contents Wireless Features Description Contents List of Tables.ii Revision Historyii 1 Introduction.1 1.1 General .1 1.2 Scope 1 1.3 Organization .2 2 Ref
20、erences.2 2.1 Normative References 2 2.2 Informative References.3 3 Definitions and Concepts5 3.1 Definitions 5 3.2 Feature Description Concepts and Template 25 3.2.1 Normal Procedures With Successful Outcome 25 3.2.2 Exception Procedures or Unsuccessful Outcome.27 3.2.3 Alternative Procedures .28 3
21、.2.4 Interactions with Other Wireless Services .28 3.3 Typography.30 4 Listing of Series Parts .31 TIA-664.000-B-3E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 List of Table
22、s 000-ii List of Tables Table 1: Feature Code String Items .13 Table 2: Modifier Digit Assignments 16 Table 3: Modifier Digit Assignments for WIN-Based Services 16 Table 4: Listing of Parts (1 of 2)31 Table 4: Listing of Parts (2 of 2)32 Revision History Revision Date Remarks IS-52, Revision 0 Augus
23、t 1991 Initial publication IS-53, Revision A May 1995 Updated publication ANSI/TIA/EIA-664, Revision 0 June 1996 Initial ANSI publication ANSI/TIA/EIA-664-000-A July 2000 Updated publication ANSI/TIA-664-000-B July 2003 Updated publication TIA-664.000-B-1E November 2005 Updated publication TIA-664.0
24、00-B-2E January 2006 Updated publication TIA-664.000-B-3E September 2007 Updated publication TIA-664.000-B-3E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 000-1 Introduction
25、1 Introduction This Standard presents a recommended plan for the implementation of uniform features for use in wireless telecommunications systems. Its intent is to describe services and features so that the manner in which they are used by a subscriber can remain reasonably consistent from system t
26、o system. It is not intended to require that specific service offerings be required of all service providers. 1.1 General This document describes a subset of wireless features that a wireless subscriber can use in any wireless system into which the subscriber roams. The selected subset consists of f
27、eatures that are more likely to be used when roaming, and features that are necessary to implement full intersystem operation. 1.2 Scope This document provides descriptions and standard operational procedures for a number of specific features. These particular features were selected with the followi
28、ng considerations in mind: The list of features is restricted to those features that afford the subscriber an acceptable degree of control over common call situations. No attempt is made to “standardize” all of the features that are, may be, or could be made available in the wireless industry. The o
29、bjective is to provide subscribers with reasonable comfort and familiarity as they move between systems while not infringing on the need of manufacturers and service providers to compete by means of nonstandard offerings. All selected features can be implemented, in their “standard” form by MSCs des
30、igned to serve smaller markets; i.e., standard procedures should not have unduly burdensome memory and processing capacity requirements. Individual manufacturers may offer “enhanced” versions of standard features; however, such enhancements should not surprise the unsuspecting subscriber by deviatio
31、ns from the standard. Feature options should provide flexibility of the manufacturers and service providers offerings. Certain features may also be implemented using a “Wireless Intelligent Network” (WIN) architecture, in which case the functionality required to provide features (such as service swi
32、tching, service control, service data, and special resources) may be distributed throughout the network. In such a case, the service control or service data functions associated with features may be distributed among the MSC, HLR, SCP, SN, IP, or other network elements, and the interactions between
33、features must be managed carefully to prevent undesirable or unexpected results. Feature Interaction Manager and Service Interaction Manager procedures should be implemented in networks employing such an architecture. The features selected provide as much home service provider control over the featu
34、re operation as possible. This is to allow for competition between manufacturers and service providers, while providing seamless feature operation to the subscribers. The mechanisms for these features should allow other home system controlled features to be implemented without sacrificing seamlessne
35、ss. TIA-664.000-B-3E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Introduction 000-2 1.3 Organization This Standard is organized as a series of documents. This document is or
36、ganized as follows: Section 2 entitled “References” provides a list of references used with this Standard. Section 3 entitled and “Definitions and Concepts” defines terminology and acronyms used in this Standard. The last subsection of Section 3 defines a template that must be followed by all featur
37、e descriptions. Section 4 entitled “Listing of Series Parts” lists the Parts name, revision, and date of publication. The other documents in this Standard are categorized as follows: Part 100 series entitled “General Background and Assumptions” identifies the general background and assumptions under
38、 which the procedures for providing the identified services are designed to operate. Part 500 series entitled “Voice Feature Descriptions” describes supported voice feature behavior and interactions with other features. Part 600 series entitled “Short Message Service Feature Descriptions” describes
39、the bearer services and teleservices to support short message services. Part 700 series entitled “Mobile Station Functionality” describes the functionality that may be offered in a terminal device. Part 800 series entitled “System Functionality” describes the functionality assumed for the wireless s
40、ystem. Other part series are reserved for future use. 2 References 2.1 Normative References The following standards contain provisions that, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subjec
41、t to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards published by them. CDMA TIA-2000-D v2.0, cdma2000
42、 Standards for Spread Spectrum Systems; Telecommunications Industry Association; 2005. CDMA_DSO TIA-707-B, Data Service Options for Spread Spectrum Systems; Telecommunications Industry Association; 2004. CDMA_IP X.S0011-D v1.0, cdma2000 IP Network Standard; 3rd Generation Partnership Project 2; 2006
43、. TIA-664.000-B-3E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 000-3 References DMH X.S0014-E v2.0, Wireless Radio Telecommunications Intersystem Non-Signaling Data Communic
44、ation DMH (Data Message Handler); 3rd Generation Partnership Project 2; 2006. MAP TIA/EIA-41-D, Cellular Radiotelecommunications Intersystem Operations; Telecommunications Industry Association; 1997. TIA-41-E, Wireless Radiotelecommunications Intersystem Operations, Telecommunications Industry Assoc
45、iation; 2004. MAP_LCS TIA-881-1 E, MAP Location Services Enhancements; Telecommunications Industry Association; 2006. T1.611 ANSI T1.611-1991(R2003), Signaling System Number 7 (SS7)Supplementary Services for Non-ISDN-Subscribers; American National Standards Institute, Inc.; 2003. T1.209 ANSI T1.209-
46、2003, Operations, Administration, Maintenance, and Provisioning (OAM American National Standards Institute, Inc.; 2003. T1.667 ANSI T1.667-2002(2007), American National Standard for Telecommunications Intelligent Network; American National Standards Institute, Inc.; 2002. E.161 Recommendation E.161,
47、 Arrangement of digits, letters and symbols on telephones and other devices that can be used for gaining access to a telephone network; ITU-T; May 1995. E.164 Recommendation E.164, The International Public Telecommunication Numbering Plan; ITU-T; May 1995. E.165 Recommendation E.165, Timetable for C
48、oordinated Implementation of the Full Capability of the Numbering Plan for the ISDN Era; Volume II - Fascicle II.2; Telephone Network and ISDNOperation, Numbering, Routing and Mobile Service; CCITT (now ITU-T); 1989. E.212 Recommendation E.212, The International Identification Plan for Mobile Termin
49、als and Mobile Users; ITU-T; November 1998. I.130 Recommendation I.130, Method for the Characterization of Telecommunication Services Supported by an ISDN and Network Capabilities of an ISDN; ITU-T; November 1988. 2.2 Informative References ANS-660 ANSI/TIA/EIA Standard 660, Uniform Dialing Procedures and Call Processing Treatment for Use in Cellular Radio Telecommunications; Telecommunications Industry Association; 1996. IP_NAM TSB-151-B, IP Network Architecture Model for cdma2000 Spread
