1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 4248-5 Fuseholders Part 5: Class GUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER
2、 REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Fuseholders Part 5: Class G, UL 4248-5 First Edition, Dated February 28, 2007 Summary of Topics This revision to ANSI/UL 4248-5 is being issued to update the UL approval date per a UL Standards reaffirmation of ANSI/
3、UL 4248-5, NMX-J-009/4248/5-ANCE and CSA C22.2 No. 4248.5-07. Text that has been changed in any manner or impacted by ULs electronic publishing system is marked with a vertical line in the margin. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or tr
4、ansmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness
5、 for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL represent
6、ative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless fr
7、om and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, exc
8、ept for those paragraphs, sections, tables, gures, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPER
9、SEDED REQUIREMENTS notice. DECEMBER 21, 2012 UL 4248-5 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL DECEMBER 21, 2012 UL 4248-5 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WIT
10、HOUT PERMISSION FROM UL Association of Standardization and Certication NMX-J-009/4248/5-ANCE First Edition CSA Group CSA C22.2 No. 4248.5-07 First Edition Underwriters Laboratories Inc. UL 4248-5 First Edition Fuseholders Part 5: Class G February 28, 2007 (Title Page Reprinted: December 21, 2012) AN
11、SI/UL 4248-5-2007 R(2012)UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as
12、 “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the standard may be submitted to ANCE, CSA Group, or UL at any time. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA
13、 Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or additional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyr
14、ight 2007 ANCE Rights reserved in favor of ANCE. ISBN 1-55436-043-9 2007 CSA Group All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permission of the publisher. To purchase the CSA Group Standards and related publications, visit CSA Groups O
15、nline Store at shop.csa.ca or call toll-free 18004636727 or 4167474044. This Standard is subject to periodic review, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, please send the following information to inquirescsagroup.org and i
16、nclude “Proposal for change” in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. Copyright 2012 Underwriters Laboratories Inc. To purchase UL Standards, visit COMM 2000 at http:/m- or call toll
17、free 18888533503. This ANSI/UL Standard for Safety consists of the First Edition including revisions through December 21, 2012. The most recent designation of ANSI/UL 4248-5 as a Reaffirmed American National Standard (ANS) occurred on December 21, 2012. ANSI approval for a standard does not include
18、the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at
19、 http:/. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL.UL COPYRIGHTED MATER
20、IAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface .4 1 General 6 1.1 Scope .6 4 Classication .6 5 Characteristics 6 5.1 Summary of characteristics 6 6 Marking 6 6.1 Marking of fuseholders 6 7 Construction 7 7.6 Contacts of a cartridge fuseholder
21、7 8 Tests 9 8.1 General .9 8.4 Verication of temperature rise .9 FEBRUARY 28, 2007 NMX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 4248-5 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface This is the common ANCE, CSA Group, and UL st
22、andard for Fuseholders Part 5: Class G. It is the rst edition of NMX-J-009/4248/5-ANCE, the rst edition of CSA C22.2 No. 4248-5, and the rst edition of UL 4248-5. This common standard was prepared by the Association of Standardization and Certication (ANCE), CSA Group, and Underwriters Laboratories
23、Inc. (UL). The efforts and support of the CANENA Technical Harmonization Subcommittee 32B Fuseholders are gratefully appreciated. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Low
24、voltage fuses, under the jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard will be submitted to the Standards Council of Canad
25、a for approval as a National Standard of Canada. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. A UL standard is current only if it incorporates the most recently adopted revisions, all of which are itemized on the transmittal no
26、tice that accompanies the latest set of revised requirements. Where reference is made to a specic number of samples to be tested, the specied number shall be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to not
27、e that it remains the responsibility of the users of the standard to judge its suitability for their particular purpose. Level of harmonization This standard is published as an identical standard for ANCE, CSA Group, and UL. An identical standard is a standard that is exactly the same in technical c
28、ontent except for national differences resulting from conicts in codes and governmental regulations. Presentation is word for word except for editorial changes. Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal
29、 text to determine compliance with the standard in accordance with the procedural rules of the standards development organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organization
30、s to more accurately reect the intent. ANCE effective date The effective date for ANCE will be announced through the Diario Ocial de Ia Federacin (Official Gazette) and is indicated on the cover page. DECEMBER 21, 2012 NMX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 4248-5 4UL COPYRIGHTED MATERIAL
31、NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CSA Group effective date The effective date for CSA Group will be announced through CSA Informs or a CSA Group certication notice. UL effective date As of November 2, 2009 all products Listed or Recognized by UL must
32、comply with the requirements in this standard Between February 28, 2007 and November 2, 2009, new product submittals to UL may be evaluated under all requirements in this standard or, if requested in writing, evaluated under presently effective requirements only. The presently effective requirements
33、 are contained in the tenth edition of UL 512. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. DECEMBER 21, 2012 NMX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 4248-5 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODU
34、CTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Fuseholders Part 5: Class G 1 General This Part is intended to be read together with the Standard for Standard for Fuseholders, Part 1: General Requirements, hereafter referred to as Part 1. The numbering of the Clauses in this Part corresponds to lik
35、e numbered Clauses in Part 1. The requirements of Part 1 apply unless modied by this Part. For Clauses not shown below, refer to the Standard for Fuseholders Part 1: General Requirements, NMX-J-009-4248-ANCE CSA C22.2 No. 4248.1 UL 4248-1. 1.1 Scope 1.1.2 These requirements cover fuseholders intende
36、d for use with Class G Fuses as described in NMX-J-009/248/5-2000-ANCE, CSA C22.2 No. 248.5, UL 248-5, Low-Voltage Fuses Part 5: Class G Fuses. 4 Classication 4.1 Class G fuseholders have a short-circuit withstand rating of 100,000 A. Class G fuseholders are rated 480 V or 600 V, and have four body
37、sizes corresponding to the Class G fuse body size. 5 Characteristics 5.1 Summary of characteristics 5.1.3 Voltage and current rating 5.1.3.1 Class G fuseholders shall be rated 480 or 600 V. 5.1.3.2 Class G fuseholders shall be rated 15, 20 A (600 V); 30, 60 A (480 V). 5.1.4 Withstand rating 5.1.4.1
38、Class G fuseholders shall have a short-circuit withstand rating of a 100,000 A. 6 Marking 6.1 Marking of fuseholders 6.1.1.1 In addition to the requirements of Part 1, the fuseholder shall be marked: f) Use Class G Fuses ; g) For panel mount and in-line fuseholders, “line” and ”load” shall be marked
39、, with the terminal recessed furthest in the device designated as the line terminal; and h) “DO NOT OPERATE UNDER LOAD” or equivalent for fuseholders of the modular design where the fuse is inserted or removed by use of a carrier. FEBRUARY 28, 2007 NMX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 42
40、48-5 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 7 Construction 7.6 Contacts of a cartridge fuseholder 7.6.1 The dimensions of a Class G fuseholder shall be as specied in Figure 7.6A. This is generated text for gtxt. FEBRUARY 28, 2007 N
41、MX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 4248-5 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Figure 7.6A Class G fuseholder Ferrule contact type Note: Tabs shown are a typical end-stop conguration. Class of fuse Potential rating o
42、f fuse, volts Current rating of fuse, amperes Dimensions, mm (in) BCD G Distance between contact clips Minimum width of contact clip Diameter of ferrule Distance between end stops Minimum Maximum G 600 15 19.05 (0.750) a 7.75 (0.305) 10.312 (0.406) 34.16 (1.345) 34.67 (1.365) 20 b 21.41 (0.843) a,b
43、7.75 (0.305) 10.312 (0.406) 36.58 (1.440) 37.08 (1.460) 480 30 29.46 (0.62) a 7.75 (0.305) 10.312 (0.406) 42.16 (1.6) 43.18 (1.7) 60 31.75 (1.250) a 12.7 (0.5) 10.312 (0.406) 57.94 (2.281) 60.32 (2.375) a Tolerances for the B dimensions are: 60 amperes or less: plus 0.79 mm (0.031 in) and minus 1.57
44、 mm (0.062 in) b Minus tolerance may be 3.96 mm (0.156 in) FEBRUARY 28, 2007 NMX-J-009/4248/5-ANCE CSA C22.2 NO. 4248.5-07 UL 4248-5 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 8 Tests 8.1 General 8.1.1 Types of tests 8.1.1.1.1 Each fus
45、eholder shall be subjected to the tests as specied in Part 1. 8.4 Verication of temperature rise 8.4.3 Test method 8.4.3.1 With dummy fuses in place and carrying rated current continuously, the temperature on a material or component or electrical insulation shall not exceed the values in Table 8.4B.
46、 8.4.3.2 Dummy fuses shall be unplated copper and shall conform to the dimensions in Table 8.4A. 8.4.3.3 The temperatures specied in Table 8.4B are based on an assumed ambient temperature of 25C (77F). A test may be conducted at an ambient temperature within the range of 20 40C (68 104F). 8.4.3.4 Du
47、ring a test conducted at an ambient temperature of 25C (77F), an observed temperature shall not exceed the required value specied in Table 8.4B. 8.4.3.5 If a test is conducted at an ambient temperature other than 25C (77F), an observed temperature shall be corrected as described in Clause 8.4.3.4. N
48、either a corrected temperature nor an observed temperature shall exceed the required value specied in Table 8.4B. 8.4.3.6 An observed temperature is to be corrected by addition if the ambient temperature is lower than 25C (77F) or subtraction (if the ambient temperature is higher than 25C) of the di
49、fference between 25C and the ambient temperature. 8.4.3.7 If a corrected temperature exceeds the required value specied in Table 8.4B, at the request of the manufacturer, the test may be repeated at an ambient temperature closer to 25C (77F). Table 8.4A Dimensions of dummy fuses Rating in amperes Class of fuse Shape Dimensions, mm (in) Outside diameter Wall thickness Length 15 G Tube
