1、METRIC A-A-1249A Mav 18, 1993 SUPERSEDING A-A-1249 April 29, 1980 COMMERCIAL ITEM DESCRIPTION PAPER, WRAPPING, TISSUE The General Services Administration has authorized the use of this Commercial Item Description, for all Federal agencies. Scope: This description covers tissue paper which is used fo
2、r wrapping items to protect them from breaking, scratching or dust during shipment or storage. Classification: The tissue paper covered by this Commercial Item Description shall be of the following types, as specified (See Section 6, Ordering Data) . Type I - regular Type II - antitarnish 1. SALIENT
3、 CHARACTERISTICS: A. The tissue paper shall be 100 percent bleached chemical wood pulp and shall conform to the requirements in Table 1 when tested in accordance with paragraph 4.C.(3). B. Type II tissue paper shall not tarnish silver when tested in accordance with paragraph 4.C.(3). C. The tissue p
4、aper shall be furnished in sheet:; with clean cut edges. The dimensions shall be as specified + 6.4 millimeters (+ 1/4 inch) Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document, should be sent to: General Services Adnninistrat
5、ion, Federal Supply Service, 26 Federal Plaza, New York, NY 10278 ATTN: Engineering Branch (2FYEE) 9 Approved for public release; distribution is unlimited. F S C 8135 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-1249A e Table 1 Characteristic
6、 Basis weight (24 x 36 in - 480) Bursting strength, 4 piles Tearing resistance MD Acidity, pH value, Type I Acidity, pH value, Type II Requirement 16.95 g/m2 2 10 percent (10 lbs $,andard: Fed. Std. No. 123, Marking for Domestic Shipment (Civil Agencies) Activities outside the Federal Government may
7、 obtain copies of Federal Specifications, Standards, Handbooks, and Commercial Item Descriptions (CIDs) , as outlined under General Information in the Index of Federal Specifications, Standards and Commercial Item Descriptions. The Index, which includes cumulative bimonthly supplements as issued, is
8、 for sale on a subscription basis by the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402. Single copies of this Commercial Item Description, or other Commercial Item Descriptions required by activities outside the Federal Government for bidding purposes are avail
9、able without charge from General Services Administration Business Service Centers in Boston; New York; Philadelphia; Washington, D.C.; Atlanta; Chicago; Kansas City, MO; Fort Worth; Houston; Denver; LOS Angeles; San Francisco; and Auburn, WA. t ? 2. Provided by IHSNot for ResaleNo reproduction or ne
10、tworking permitted without license from IHS-,-,-A-A-324SA m 9999974 0344248 978 m A-A-1249A Federal Remlations: Title 40, Code of Federal Regulations, Protection of Environment, Part 250, Guideline for Federal Procurement of Paper Products containing Recovered Materials. Copies of the U.S. Code of F
11、ederal Regulations may be purchased with a VISA, Master Card, or prepaid check through: Government Printing OffiCe Washington, D.C. Phone: (202) 783-3238 When ordering, ask for: Title 40, Parts 190-250 Stock Number: 869-013-00-146-0 Military Standards: MIL-STD-105, Sampling Procedures and Tables for
12、 Inspection by Attributes MIL-STD-129, Marking for Shipment and Storage Copies of Military Specifications and Standards required by contractors in connection with specific procurement functions should be obtained from Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphi
13、a, PA 19111-5094 Industry Standards: TAPPI test methods are available from TAPPI, Technology Park/ Atlanta, P.O. Box 105113, Atlanta, Georgia 30348. 3. REGULATORY REOUIREMENT: The contractor shall certify that the product offered shall include a minimum of 5% postccmsumer recovered materials, in acc
14、ordance with 40 CFR, part 250. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4. QUALITY ASSURANCE: A. Responsibility for InsDection: Unless otherwise specified in pe
15、rformance of all the inspection requirements of this CID. Except as otherwise specified, the supplier may utilize his own facilities i the contract or purchase order, the supplier is responsible for the 3. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-
16、,-,-A-A-1249A or any commercial laboratory acceptable to the Government. The Government reserves the right to perform any of the inspections set forth in the Commercial Item Description, where such inspections are deemed necessary to assure that supplies and services conform to prescribed requiremen
17、ts (See Section 6, Ordering Data). B. Samplinq: All sampling shall be in accordance with MIL-STD-105 except in paragraph (3). (1) Samplinu for Visual Inspection. A random sample of tissue paper shall be taken from each lot. The inspection level shall be S-4 with an Acceptable Quality Level (AQL) of
18、4.0 percent defective. The sample unit shall be one sheet. (2) Barnplinu for Dimensional Inspection. A random sample of tissue paper shall be taken from each lot. The inspection level shall be S-3 with an AQL of 4. O percent defective. The sample unit shall be one sheet. (3) Samplinu for Tests. A ra
19、ndom sample of tissue paper shall be taken from each lot. The inspection level and AQL percent shall be as per TAPPI T-400. (4) Samplinu for Preparation for Delivery. For examination of the preparation for delivery. The sample unit shall be one shipping container fully prepared for delivery, selecte
20、d at random. The inspection level shall be S-2 with an AQL of 4.0 percent defective. C. InsDections. (1) Visual Examination. Samples taken in accordance with paragraph 4.B.1. shall be examined to verify that the superficial product requirements are in compliance with Section 1. (2) Dimensional Exami
21、nation. Samples taken in accordance with paragraph 4.B.2. shall be examined to verify. that all dimensionally measurable product requirements are in compliance with Section 1. (3) Tests. Samples taken in accordance with paragraph 4.B.3. shall be subjected to the following tests to demonstrate consis
22、tency in product functionality, durability, and performance expectations. (a) For basis weight use TAPPI test method T-410. (b) For bursting strength use TAPPI test method T-403. 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5. 6. . A-A-1249A (c
23、) For tearing resistance use TAPPI test meth,od T-414. (a) For acidity use TAPPI test method T-435. (e) Type II tissue paper shall not tarnish silver when tested using TAPPI T-444. (4) Examination for Preparation for Delivery. Samples taken in accordance with paragraph 4. B. 4. shall be examined to
24、determine compliance with Section 5. PREPARATION FOR DELIVERY. A. Packaqinq and Packina Provisions. Each ream (480 sheets) shall be packaged to prevent damage during multiple shipments, handling, and storage. Packaged tissue paper shall be packed in accordance with normal commercial practice. The pa
25、cking container shall be closed to prevent accidental opening and shall be such to insure carrier acceptable and safe delivery to destination, complying with the rules and regulations applicable to the mode of transportation to be used. (See Section 6) B. Markinq. (1) For Shipment to Civilian Auenci
26、es. In addition to any special marking required by contract or order, :marking shall be in accordance with Fed. Std. No. 123. Bar Code marking is required, unless otherwise specified (See Section 6). (2) For Shipment to Military Activities. In addition to any special markings required by the contrac
27、t or order, marking shall be in accordance with MIL-STD-129. Bar Code marking is required, unless otherwise specified (See Section 6). NOTES. A. Orderins Data: Purchasers should select the preferred options permitted herein, and include the following information in procurement documents: (1) Title,
28、number, and date of this Commercial Item Description. (2) Desired type. (3) Arrangement for inspections and inspection facilities, if different than provisions under Quality Assurance. 5. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-1249A W 99
29、99974 0344253 462 m A-A-1249A * (4) Special packaging and packing, if different than provisions in Packaging and Packing. 8 (5) Special marking, if different than provisions in Marking. (6) Specify, only if Bar Code marking is not required. I 5ILITARY INTEREST: Custodian Activities Army - GL Navy - SA Air Force - 69 Review Activities Army - MD Air Force - 84, 99“ PREPARING ACTIVITY: GSA-FSS 6. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
