1、- - A-A-50083 83 W 7797774 0037363 5 A-A-500 83 September 30, i986 COMMERCIAL ITEM DESCRIPTION BAG, PLASTIC, FOLDED GARMENT The General Services Administration has authorized the use of this comercial item description. 1. Salient characteristics. 101 Design and construction. flap or a flip top const
2、ruction. gusset that ranges between 1 and 4 inches. continuous and shall have a minimum of 50 percent of the material strength. reverse flap shall be a nominal 3 inches. in dimensions. The plastic bag chal1 be of a reverse outside Bags may be flat or furnished with a bottom Seams shall be straight a
3、nd The Face and bottom panels shall be equal Bags may have a venting hole to permit excess air to escape. 1.2 Fit and size. The plastic bag shall fit the folded garment by not exceeding any dimension or combination of dimensions by more than 10 percent of the garment s dimensions when folded. 1.3 Cl
4、osure. When the plastic bags are filled and closed, the closure shall be secure and without distortion. When the face width of a bag exceeds 14 inches, a piece of pressure adhesive tape shall be placed across the center of the closure to add security to the closure. 2. The contractor shall certify t
5、hat the product offered meets the salient characteristics of this description, conforms to the producers own Certification. drawing, specification, standard, and quality assurance practices and is the same product sold in the commercial marketplace, except for the additional requirements/characteris
6、tics specified herein. The Government reserves the right to require proof of such conformance prior to first delivery and there- after as may be otherwise provided for under the provisions of the contract. 3. Packaging. 3.1 Packing and palletization. When procured by the Government, one thousand bag
7、s shall be packed in a snug-fitting fiberboard shipping container that conforms to PPP-B-636. The shipping container shall be completely filled with no voids and of a size that can be palletized in accordance with MIL-STD-147. Each shipping container shall be closed in accordance with the appendix o
8、f PPP-P-636. When specified (see 4.2), plastic bags, packed as specified, shall be palletized in accordance with MIL-STD-147. FSC 8105 , DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimite( -. THIS DOCUMENT CONTAINS a- PAGES. Licensed by Information Handling ServicesA-A-
9、5 O0 8 3 3.2 Marking. For Government procurements only, and in addition to any special marking required by the catitract or purchase arder, shipping containers and palletized unit loads shall be marked in accordance with MIL-STD-129. 4. Notes 4.1 for various clothing items. 4.2 Ordering data. Intend
10、ed i- use. The plastic bags are intended for use as a protective unit pack e- a. Title, number, and date of this document. b. When palletization is required (see 3.1). MILITARY INTERESTS : CIVIL AGENCY COORDINATING ACTIVITY: Cu s t od i ans GSA - FSS Amy - GL PREPARING ACTIVITY: Navy - SA Air .Force - 69 Army - GL User Activity Project No. 81.05-0318 Navy - N Licensed by Information Handling Services
