1、A-A-50175 October 5, i988 COMMERCIAL ITEM DESCRIPTION CUP, COMMUNION, PLASTIC The General Services Administration has authorized the use of this commercial item description in preference to MIL-C-43382. 1. CLASSIFICATION 1.1 Classification. This commercial item description ccjvers two types of commu
2、nion cups as follows: Type I - Plastic disposable . Type II - Plastic, shatterproof, boilable 1.2 Part identification number. The part identification number shall consist of the commercial item description number and the type number as follows: AAXXXX-I 1 I Type CID number 2. SALIENT CHARACTERISTICS
3、 2.1 Design and construction. Both type communion cups shall be cylindrical in design. The-cups shall measure 1-1/4 inches (plus or minus 1/16 inch) high. The cups may be supp ied with or without a lip at the option of the supplier. Both shall be odorless and conform to the Federal Food, Drug and Co
4、smetic Act, Food Additive Amendment, for contact with food, The type I shall be a commercial grade of clear, uncolored plastic. The type II shall be a commercial grade of clear, uncolored, unfilled, polystyrene molding composition with improved resistance to thermal distortion. 3. QUALITY ASSURANCE
5、3.1 Certification. The contractor shall certify that the product offered meets the salient characteristics and requirements of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. AMSC N/A FSC 9925 When specific quality assurance pr
6、ovisions are DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. -. THIS DOCUMENT CONTAINS 3 PAGES. - -P -_-, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-l_l- _- - A-A-50175 77 7777774 0047237 b H A-A-50 175 specifie
7、d for any commercial characteristic, the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The Gover
8、nment reserves the right to require proof of such 4, PACKAGING 4.1 Packaging. One hundred cups shall be packaged in a plastic bag. . 4.2 Packing, Ten bags of cups shall be packed in a fiberboard shipping container conforming to style RSC, type CF (variety SW) or SF, class domestic, grade 275 of PPP-
9、B-636, Shipping containers shall be closed in accordance with the appendix of PPP-B-636, Each chipping container shall be of a size palletizable in accordance with MIL-STD-147. 4.3 Palletization. When specified (see 5.21, shipping containers shall be palletized in accordance with load type la of MIL
10、-STD-147, shall be bonded with primary and secondary straps in accordance with bonding means K and L, or film bonding means O or P. Pallet pattern shall be in accordance with the appendix of MIL-STD-147. Eachsprepared load 4.4 Marking, purchase order, unit packs, shipping.containers and unitized loa
11、ds shall be marked in accordance with MIL-STD-129. In addition to any special markings required by the contract or 5. NOTES . 5.1 Intended use. The communion cups covered by this document are to be used to serve individuals communion at religious services. 5.2 Ordering data. a. Title, number, and da
12、te of this document. b. Type required (see 1.1). c, When palletization is required (see 4.3). 5.3 Source of government documents. available from: Copies of military and Federal documents are Naval Publications ard Forms Center 5801 Tabor Avenue Philadelphia, PA 19102 2 Provided by IHSNot for ResaleN
13、o reproduction or networking permitted without license from IHS-,-,-A-A-50175 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians GSA - FSS Army - GL Navy - PE Air Force - 28 PREPARING ACTIVITY: Army - GL Review activities Project No. 9925-1014 Armed Forces Chaplains Board DLA - GS 3 . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
