1、1 INCH-POUND A-A-5 2 O 6 1 January 22, 1990 COMMERCIAL ITEM DESCRIPTION DISPENSER, CUPS, CUP LIDS, AND DRINKING STRAWS The General Services Administration has authorized the use of this commercial item description. 1. SALIENT CHARACTERISTICS 1.1 Design and construction. The dispenser shall be a coun
2、tertop type containing four cylindrical tubes for paper, or plastic, or Styrofoam cups and compartments for cup lids and drinking straws, to be used with beverage drink dispensers. Maximum overall dimensions shall be 14 inches wide, 24 inches deep, and 26 inches high. The dispenser, except for the c
3、up tubes, shall be fabri- cated of stainless steel or polished aluminum, The cup tubes shall be fabri- cated of 300 series stainless steel. The dispenser shall be equipped with four stainless steel spring-loaded cup tubes suitable for dispensing plastic, paper, or Styrofoam cups. from the front of t
4、he dispenser to the back with the opening for loading and removing the cups in the front. Size of cup tubes shall be for cup size specified (see 4.2). dispenser, shall be provided for storage and removal of plastic cup lids and drinking straws. The cup tubes shall be in a near horizontal position ru
5、nning Open compartments, accessable from the front of the The dispenser shall be mounted on rubber or plastic feet. 1.2 Codes and standards. The dispenser shall comply with National Sanitation Foundation Standard No. 18 or Criteria C-2. Beneficial comments, recommendations, additions, deletions, cla
6、rifications, etc. and any other data which may improve this document should be sent by letter to: Commander, U.S. Army Natick Research, Development, and Engineering Center, ATTN: STRNC-ES, Natick, MA 01760-5014 AMSC NIA FSC 4510 DISTRIBUTION STATEMENT A. Approved for public release; distribution is
7、unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5206 1 1.3 Identification marking (Government unique requirement, see 4.4). Each dispenser shall have the manufacturers name, contract number, and national stock number embossed or engrav
8、ed on the outer housing of the dispenser, “stick-on“ or removable labels is prohibited. Use of 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial It
9、em Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such confor- mance prior to first delivery and thereafter as may be otherwise provided or under the provision
10、s of the contract. 2.2 End item examination. Sampling inspection shall be in accordance with MIL-STD-105. (AQL), expressed in terms of defects per hundred units, shall be 4.0. The sample unit shall be one complete end item. The defects are as follows: The inspection level shall be II and the accepta
11、ble quality leyel Any component missing Not fabricated of materials specified Not constructed as specified Any burr, sliver, sharp edge, rough die, tool, gauge, trim, or grind marks Any component fractured, bent, buckled, dented, punctured, or malformed Welding not smooth and free of cracks, burn ho
12、les, or undercuts Manufacturers identification marking missing or incomplete Cup tubes not proper size 2.3 Metric product. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances us
13、ing conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this CID are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contract
14、ing officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product, 2.4 Regulatory requirements. The offerorfcontractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. 2
15、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-520b3 45 9797974 0052736 O A-A-5206 1 3. PACKAGING 3.1 Packaging and packing. Packaging and packing shall be commercial or as specified (see 4.2). 3.2 Commercial packaging and packing. Each dispense
16、r shall be cleaned, preserved, packaged, packed, and unitized in accordance with ASTM D 3951. 3.3 Marking. Marking of unit pack, shipping container, and unit load shall be in accordance with ASTM D 3951. 4. NOTES 4.1 Intended use. The dispenser covered by this commercial item description is intended
17、 for use in the serving line of military dining facilities to dispense cups, lids, and straws in an organized manner. 4.2 Ordering data. Acquisition documents should specify the following: a. Title, number, and date of this document. b. Size of cup to be dispensed (see 1.1). C. Type of packaging and
18、 packing required (see 3.1) 4.3 Sources of documents. 4.3.1 Sources of nongoverment association documents. ASTM D 3951 - Standard Practice for Commercial Packaging, is available from: The American Society for Testing and Materials (ASTM) 1916 Race Street Philadelphia, PA 19103 NSF Standard No. 18 -
19、Manual Food and Beverage Dispensing Equipment and Criteria C-2 - Special Equipment and/or Devices, are available from: National Sanitation Foundation (NSF) 3475 Plymouth Road P.O. Box 1468 Ann Arbor, MI 48106 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
20、 IHS-,-,-_ 0052737 2 W A-A-5 20 6 1 4.3.2 Source of governmental documents. Copies of Military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 4.4 Government unique requirements. Whenever “(Government unique requi
21、rements)“ is included in the title of a paragraph under “salient characteristics“ it is meant that the requirement is something that is not normally offered to the commercial marketplace by the manufacturer. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Amy - GL Navy - SA Air Force - 99 Review activities: Amy - MD, TS Air Force - 84, 50 User activities: PREPARING ACTIVITY: Amy - GL (Project 4510-0243) Army - CE Navy - MC 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
