1、A-A-52555 9999974 OLb95bL 407 r Beneficial comments, recommendations, additions, deletions clarifications, etc. and any other data which may improve this document should be sent to: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000. METRIC A-A-52555 - SUPE
2、RSEDING 9 February 1971 MIL-H-l3837B(ME) COMMERCIAL ITEM DESCRIPTION HOOK, HOIST, BURTON-STYLE The General Services Administration has authorized the use of this commercial item description (CID) for all federal agencies. 1. SCOPE. This CID covers a forged-steel, burton-style, hoist hook. 2. SALIENT
3、 CHARACTERISTICS. 2.1 Materials. The materials shall be carbon or alloy steel, having a minimum tensile strength of 414 kilopascals (Wa) 60,000 pounds per square inch (psi), and a minimum yield strength of 242 Wa (35,000 psi). 2.2 Proof. The hook shall sustain a steadily applied proof load of 2720 k
4、ilograms (kg) 6,000 pounds (lbs) without permanent set or deformation, and a steadily applied minimum ultimate strength load of 6350 kg (14,000 lbs) without disengagement of the load by straightening of the hook. 2.3 . The hook shall be as shown in figure 1. . 2.4 and legible and shall include, as a
5、 minimum, the manufacturers identification code (CAGE), the contract number, the part identification number (PIN) AA525551 (see 6.1), and the national stock number (NSN). . Identification and markings of the hooks shall be permanent . Approved for public release; distribution is unlimited. Provided
6、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52555 = 9999974 0369562 343 A-A-52555 31.8 mm 0- STOCK 22.2f1.6 mm R I I e_ I I I I -r I NOTE: ALL TOLERANCES ARE f3.2 mm UNLESS OTHERWISE NOTED. I i I I I I v 305I25.4 mm FIGURE 1. -6 2 Provided by IHSNot f
7、or ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52555 3. REGULATORY REQUIREMENTS. 3.1 maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). . The offeror/contractor is encouraged to use recovered materials to th
8、e 3.2 Safetv. This item shall comply with all applicable Occupational Safety and Health Administration (OSHA) requirements found in 29 Code of Federal Regulations (CFR). 4. QUALITY ASSURANCE PROVISIONS. * . The contractor is responsible for the performance of all , 4.1 inspections and tests. . The c
9、ontractor shall certify and maintain substantiating evidence 4.2 V that the product offered meets the salient Characteristics of this CID and that the product conforms to the producers own drawings, specifications, workmanship standards, and quality assurance practices. Items with known defects shal
10、l not be submitted for Government acceptance. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 5. PACKING. Preservation, packing, and marking shall be as specified
11、in the contract (see 6.1). 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Chhhghb . Acquisition documents must specify the following: a. Title, number, and date of this CID. b. Issue of DODISS to be cited in the solicita
12、tion. c. PIN and quantity of hooks required. d. Selection of applicable level and packaging requirements. 6.2 u* 6.2.1 Crovernment. The Code of Federal Regulations (CFR) may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington DC 20402. 3 Provided by IHSNot f
13、or ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52555 6.3 hooks conforming to MIL-H-13837B (ME). . Hooks conforming to this CID are interchangeable/substitutable with MILITARY INTERESTS: Custodians: Army - AT CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: Army - AT (Project 4030-0276) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-