1、MIL-B-L3LIbbE 3 m 7777906 037LI64 7 m )-I -3- distribution is unlimited, THIS DOCUMENT CONTAINS 3 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-B-134bbE 3 W 7979706 0378465 9 MIL -B - 1 34 6 6 E ( GL ) Class 2 - Colored center stripe
2、Style A - 3/4 inch Style B - 1-3/4 inch 2. APPLICABLE DOCUMENTS 2.1 Government. documents. 2.1.1 Specifications, standards, and handbooks. The following K specifications, standards and handbooks form a part of this specification to the extent specified herein. Unless otherwise specified, the issues
3、of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation. H SPECIFICATIONS FE DE RAL V-T-276 - Thread, Cotton PPP-B-636 - Boxes, Shipping, Fiberboard PPP-B-676 - Boxes, Setup PP
4、P -T -45 - Tape, Gummed, Paper, Reinforced and Plain, For Sealing and Securing MILITARY MIL-L-35078 - Loads, Unit: Preparation of Semiperishable Subsistence Items; Clothing, Personal Equipment and quipage; General Specification For STANDARDS FEDERAL FED-STD-191 - Textile Test Methods FED-STD-751 - S
5、titches , Seams and S ti tchings MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection MIL-STD-129 - Marking for Shipment and Storage MIL-STD-147 - Palletized Unit Loads MIL-STD-731 - Quality of Wood Members for Containers and by Attributes Pallets _-y_ 2 Provided by IHSNot for Resale
6、No reproduction or networking permitted without license from IHS-,-,-MIL-B-234bbE 83 77777Ob 0378Vhb O MIL -B- 134 6 6E( GL (Copies of specifications, standards, and handbooks required by contractors in connection with specific acquisition functions should be obtained from the contracting activity o
7、r as directed by the contracting activity.) 2.2 Other publications. The following documents form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of the.documents which are DOD adopted shaI.1 be those listed in the issue of the DODISS specified in t
8、he solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS shall be the issues of the nongovernment documents which are current on the date of the solici tation. THE COLOR ASSOCIATION OF THE UNITED STATES, INC. Standard Color Card of America Department of Defense S
9、tandard Color Card for Heraldic Yarns, Embroidery and Ribbons Department of Defense Standard Shades for Sewing Threads (Color cards may be available from the Color Association of .the United States, Inc., 343 Lexington Avenue, New York, NY 1001 6-0927. If color cards are not available from the Color
10、 Association, individual color samples may be obtained from the contracting activity or as directed by the contracting activity.) AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS ( AATCC) Chromatic Transference Scale (Copies should be obtained from the American Association of Textile Chemists
11、and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215.) * AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 3951 - Standard Practice for Commercial Packaging (Copies should be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187
12、.) (Nongovernment standards and other publications are normally available from the organizations which prepare or which distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conflict betwee
13、n the text of this specification and the references cited herein, the text of this specification shall take precedence Nothing in this specification, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. 3 Provided by IHSNot for ResaleNo reproduction
14、 or networking permitted without license from IHS-,-,-MIL-B-L3gbbE 83 9999906 0378467 2 MIL -B - 1346 6E( GL ) 3. REQUIREMENTS 3.1 Guide samples. Samples, when furnished, are solely for guidance and information to the contractor (see 6.3). Variations from this document may appear in the sample, in w
15、hich case the document shall govern. 3.2 First article. When specified in the contract or purchase order, a sample shall be subjeoted to first article inspection (see 4.3, 6.2, and 6.4). 3.3 Materials. 3.3.1 in 3.5. Cotton yarn. The yarns shall be cotton yarns in the sizes specified 3.3.2 Rayon or n
16、ylon yarn. The yarns shall be multifilament bright or semi-dull rayon (2 ply) (cuprammonium or viscose) or nylon (singles) of a suitable denier to meet the requirements of this document. 3.3.3 Mohair yarn. The mohair used shall be not lower in grade than 28s and shall be carded, combed, and spun on
17、the worsted system and twisted into 2/30 (2 1 count) yarn. * 3.3.4 .Polyester yarn. The yarns shall.be spun, textured, or filament polyester in the sizes specified in 3.5. 3.3.5 Thread. The cotton thread shall be dyed Blue, AB, CA 66044, as .isted in the Department of Defense Standard Shades for Sew
18、ing Threads see 2.21, and shall conform to type IA3, ticket No. 50, 3 ply of V-T-276. The cotton thread shall show fastness to perspiration, wet dry cleaning, and light equal to or better than the standard sample (see 6.31, or shall show “good! fastness to perspiration, wet dry cleaning, and light.
19、* 3.4 Color. The color or colors of the dyed braids and laces shall be as listed in table I. The yarns for the braids and woven laces shall be yarn dyed. The rayon, nylon, and poiyester yarns may be spinning solution dyed. TABLE I. Color requirements Component Color 1/ Type Class - Braid, soutache I
20、 1 Goldenlite, cable No. 671 07 Braid, cord-edge: Cord portion I Fiat braid portion I 2 Goldenlite, cable No. 67107 2 Blue, shade No. 173 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-l3466E( GL) TABLE I. Color requirements (contd) Color 1/
21、 - Component C lass Braid, combination: 1/2 inch I 3 Goldenlite, cable No. 67107 1-1/4 inch I 3 Blue, shade No. 173 Braid, plain I 4 Goldenlite, cable No. 67107 Lace, plain II 1 Goldenlite, cable No. 67107 2/ - Lace, center stripe II 2 1/ Cable numbers are from the Department of Defense Standard Col
22、or Card for s- Heraldic Yarns, Embroidery, and Ribbons. . - 2/ The edge stripes shall be Goldenlite, cable No. 67107, and the center stripe(s) color(s) shall be as specified in 3.4.4. 3.4.1 Labile sulfur. The use of dyes and compounds containing elementary sulfur capable of oxidation to sulfuric aci
23、d is prohibited. The dyestuff shall be chosen and applied so that the dyed and finished braids and laces shall contain no more labile sulfur than shown by the standard sample when tested as specified in 4.4.3. When a standard sample is not available, the - dyed and finished braids and laces shall sh
24、ow no more than a slight trace of labile sulfur as defined in the test method specified in 4.4.3. 3.4.2 .Matching. The colors of the finished braids and woven laces shall match the standard sample when viewed under filtered tungsten lamps that approximate artificial daylight and that have a correlat
25、ed color temperature of 7500 2 200K, with illumination of 100 2 20 foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2300 2 200K. * 3,4.3 Colorfastness. The dyed and finished braids and woven laces shall show fastness to perspiration, wet dry cleaning and
26、 light equal to or better than the standard sample or equal to or better than a rating of llgoodll. In addition to the above requirements, dyed and finished polyester braid and woven laces shall show fastness to dry heat equal to or better than the standard sample or equal to or better than a rating
27、 of llgood.ll The dyed and finished braids and woven laces shall show fastness to crocking equal to or better than the standard sample or shall have an AATCC Chromatic Transference Scale rating not lower than 2.5. Testing shall be as specified in 4.4.3. 5 Provided by IHSNot for ResaleNo reproduction
28、 or networking permitted without license from IHS-,-,-MIL -B- 13466E( GL 3.4.4 Colors for type II, class 2 lace. The colors shall be as listed in table II and 3.5.5.1. TABLE II. Colors for tvDe II. class 2 lace Arms and services Color Adjutant Generals Corp Armor Artillery Aviation Chaplains Chemica
29、l Corps Corps of Engineers Finance Corps Infantry Inspector General Judge Advocate Generals Corp Army Medical Service Corps Intelligence and Security Military Police Corps National Guard Bureau Ordnance Corps Permanent Professors of the Quartermaster Signal Corps Staff Specialists Reserve Transporta
30、tion Corps U.S. Military Academy Dark Blue Scarlet Ye1 low Scar1 et Ultramarine Black Coba1 t Blue Golden Y el low Scarlet White Silver Gray Golden Yellow Light Blue Dark Blue Light Blue Dark Blue White Maroon White Oriental Blue Silver Gray Green Yellow Dark Blue Crimson Yellow Scarlet Silver Gray
31、Buff Orange White Green Brick Red Golden Orange Golden Yellow 6 65012 65006 65002 65006 6501 O 65003 6501 8 6501 1 65001 65006 65005 65008 6500 1 6501 4 6501 2 6501 4 6501 2 65005 6501 7 65005 70209 65008 65007 65002 6501 2 6501 3 65002 65006 65008 65004 65005 65007 65020 65001 65015 Provided by IHS
32、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-L34bbE 3 m 777970b 0378470 2 m MIL -B- 134663 ( GL) TABLE II. Colors for type II, class 2 lace (contd) Cable No. 1/ Arms and services Color - Unassigned to Branch War rant O f f i cers Teal Blue Brown White 7014
33、7 65005 6501 6 - 1/ Cable numbers in the 65,000 series are from the Department of Defense Standard Color Card for Heraldic Yarns, Embroidery, and Ribbons and cable Nos. 70209 and 70147 are from the Standard Color Card of America (see 2.2). 3.5 Construction. 3.5.1 Type I, class 1. The soutache cover
34、shall be made of rayon or nylon yarns braided around two cotton warp ends. Each cotton warp end shall be a 20/3/4-ply cord or equal. requirements in table III. The soutache shall conform to the physical 3.5.2 Type I, class 2. The flat braid section and the cord shall be braided together in one opera
35、tion on a cord-edge braider. 3.5.2.1 Cord cover. The cord cover shall be composed of rayon or nylon yarns (see 3.3.2) braided around a braided core (see 3.5.2.1 1) and shall conform to the physical requirements in table III. * 3.5.2.1.1 .Core. The core cover shall be braided with not coarser than 38
36、/2 cotton yarn around a cotton stuffer. The cotton yarn for the stuffer shall be not coarser than 10/1 and shall match the color of the cover yarns. The core shall conform to the physical requirements in table III. - 3.5.2.2 Flat braid. The flat braid section shall be braided with not coarser than 2
37、8/2 nor finer than 32/2 cotton yarn, dyed Blue 173, and shall conform to the physical requirements in table III. 3.5.3 Type I, class 3. The I/2-inch braid and the l-l/h-inch braid shall be stitched together using stitch type 304 and seam type FSa-1 conforming to FED-STD-751 using thread type IA3 (se
38、e 3.3.5). with 10 to 12 stitches per inch. The seam shall be stitched 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-L34bbE 3 777770b 0378473 4 9 MIL-B-l3466E(GL) 3.5.3.1 Braid, 1/2-inch. The braid shall be a nylon or rayon braid containing
39、a braided cotton stuffer for each vellum and one cotton stuffer end at each edge of the braid. The cotton yarn for the stuffers shall be approximately 40/2. The 1/2-inch braid shall conform to the physical requirements in table III. * 3.5.3.2 Braid, l-l/Q-inch. The braid shall be composed of mohair
40、yarn (see 3.3.3) and cotton yarn approximately 40/2. be composed of polyester yarn (see 3.3.4) 150/2 denier warp, 20/2 count filling, and 70 denier catch-cord (nominal yarn size). . As an alternate, the braid shall 3.5.4 Type I, class 4. The braid shall be a rayon or nylon braid c containing a braid
41、ed cotton stuffer for each vellum and one cotton stuffer end at each edge of the braid, The 9/32-inch braid shall conform to the physical requirements in table III. # 3.5.5 Type II, classes 1 and 2. All warp and stuffer yarns shall be not coarser than 38/2 nor finer than 40/2 mercerized cotton excep
42、t that the center stripe yarn for class 2, styles A and B, shall be rayon or nylon (see 3.3.2). The filling yarn for all laces shall be rayon or nylon (see 3.3.2). The laces shall conform to the physical requirements in table IV. 3.5.5.1 Colored center stripe. The colored center stripe shall be in a
43、ccordance with the cable number for the branch of service as designated (see 3.4.4). of service except that when two colors are designated for class 2, style B, the 3/4-inch center stripe shall have a 1/8-inch piping of the second named color on each side of a 1/2-inch stripe of the first named colo
44、r. * 3.6 Braid and lace requirements. The braid and lace physical requirements The center stripe shall match the first color designated for branch shall be as shown in tables III and IV, respectively. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
45、-MIL-B-L3YbbE 3 m 9797906 0378V72 b m e B f a, KI 4 Packaging examination. The fully packaged end items shall be examined for the defects listed below. The lot size shall be expressed in units of shipping containers. fully packaged. terms of defects per hundred units, shall be 2.5. The sample unit s
46、hall be one shippingcontainer The inspection level shall be S-2 and the AQL, expressed in Exam i ne Defect Mar king (exterior Omitted; incorrect; illegible; of improper and interior) size, location, sequence, or method of application Materials Workmanship Weight Any component missing, damaged, or no
47、t as specified Inadequate application of components, such. as incomplete sealing or closure of flap, improper taping, loose strapping, or inadequate stapling Bulged or distorted container Net weight of shipping container exceeds maximum . re qui remen t s 4.4.5 Palletization examination. The fully p
48、ackaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged. The inspection level shall be S-1 and the AQL, expressed in terms of defects per hund
49、red units, shall be 6.5. Exam i ne Defect .I Finished dimensions Length, width, or height exceeds specified maximum requirement Pal 1 et i za t i on Pallet pattern not as specified Interlocking of loads not as specified Load not bonded as specified Weight Marking Exceeds maximum load limits Omitted; incorrect; illegible; of improper size, location, sequence, or method of application 20 Provided by I
