1、 ._ s- 37-17 MIL-B-63367 13 777770b 0347024 T MIL-B-63369 (AR) 16 MARCH 1981 MILITARY SPECIFICATION BOOSTER ASSEMBLY, INERT FOR DEMOLITION KIT CRATERING, TRAINING, xM270 PARTS FOR, LOADING, ASSEMBLING AND PACKING This specification is approved for use by US Army Armament Research and Development Com
2、mand and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 This specification contains the parts, loading assembly, and packing for one type of Inert Booster Assembly for one type of rocket motor assembly designated as Rocket Motor for Demolition Kit, Cr
3、atering, Training, XM3.70. 2. APPLICABLE DOCUMENTS 2.1 Issues of documents. The following documents of the issue in effect on date of invitation for bids, or request for proposals, form a part of this specification to the extent specified herein. SPECIFICATIONS MILITARY MIL-A-48078 - STANDARDS MILIT
4、ARY MIL-STD-129 - MIL-STD-105 - MIL-STD-1188- Ammunition, Standard Quality Assurance Provisions, General Specification For Marking for Shipment and Storage Sampling Procedures and Tables for Inspection by Attributes Commercial Packaging of Supplies and Equipment FSC 1375 Provided by IHSNot for Resal
5、eNo reproduction or networking permitted without license from IHS-,-,-_- - - MIL-8-63369 13 7997906 03Li7025 L MIL-B-63369 (AR) DRAWINGS (See 6.4) U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND (ARRADCOM) 9331665 - Booster Assembly (Inert) (Copies of specifications, standards, drawings and publ
6、ications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer). 3. REQUIREMENTS 3.1 Material. Materials and parts shall be in accordance with applicable drawings and specifications. 3.2 Compon
7、ents and assembly. The components and assembly shall comply with all requirements specified on Dwg. 9331665, and associated drawings, and with all requirements specified in applicable specifications and standards. 3.3 First article inspection. This specification contains technical provisions for fir
8、st article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the contract. 3.4 Workmanship. All parts and assemblies shall be fabricated and loaded in a thorough workmanlike manner. They shall be free of burrs, sharp edges, cracks, dirt,
9、grease, rust, and other foreign matter. The cleaning method used shall not be injurious to any part nor shall the parts Be contaminated by the cleaning agent. Exterior surface coatings shall be continuous except for a few light scratches not exposing base material. All required markings shall be nea
10、t and sharply defined. All packing components shall be dry. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assurance nrovisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this
11、detail specification. 4.2 Classification of inspections a. First Article -Inspection b. Quality CQnformance Inspection :i , 4.3 First article inspection 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-B-63369 (AR) 4.3.1 Submission. The contra
12、ctor shall submit a first article sample designated by the Contracting Officer for evaluation in accordance with provisions of 4.3.2. The first article sample shall consist of the following itens in sample quantities as indicated. Part Des cri p ti on Drawing Quant i ty Base, Booster 9244448 10 Cup,
13、 Booster 9244450 10 Cup and Base Assembly 924445 1 10 Booster Assembly 9331665 . 10 Washer, Retainer 9244453 10 Disc, Booster 9244454 10 Cup, Lead 93 12808 10 4.3.2 Inspections to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection. See MIL-A-48078. i 3 . Provided by IHSNot f
14、or ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-63369 13 9979906 O349027 5 E 4“ m 4- . . N ? ? ? o N 1 2 ? f 4- 4 f 4- + 4- 4 B 4 o N . m N . m N N m m . . N . m N N . . m m in U U al icc al a v) .lJ in U u aJ 4-i rn U 0 al icc al rn I 4 , ul U u al u al cci al 3
15、al V k al rrl m 4-i 8 h FI P (o 8 9 I4 al U in O O f4 k nO 04-i bvr QJ ONU om a m 3 .rl E v “ p: B CI 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.- MIL-B-63369 13 7797906 0349028 7 W MIL-B-63369 (AR) 4.4 Quality conformance inspection 4.4.1 In
16、spection lot formation. Inspection lots shall comply with the lot formation provisions of MIL-A-48078. inspection lots of Booster Assemblies shall contain: In addition, a. Metal parts from not more than one interfix lot number from one manufacturer . 4.4.2 Examination. See MIL-A-48078. a. Sampling p
17、lans. Unless otherwise specified in the Classification of Defects and test tables, sampling plans with major and minor defects shall be in accordance with MIL-STD-105, nspec tion Level II. i 5 -. :i. o .- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
18、-,-rl 8 rl E H Lc al U O O m m m CI al a Fn MIL-B-b3367 13 m 7777906 03Li9027 7 O00 0000 a .rl ry al a al 2 $ eo O c a .rl c, vivi vivi O0 O0 6 t c a t, c 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-B-b33b7 13 H 7777906 03Lt7030 5 H b al U
19、 In O O F9 a 1 u m . . O00 OOOOd 4 5 c u m a .d 3 al d O c l-l d m B P- 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-63369 13 a 7797906 0349031 7 I L O d El al h d P a 2 2 al v) cd a m 8 a 3 u bl O a al AJ cd bl t) a .“o I L I 1 . .; Provi
20、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i MIL-B-63369 13 I 9797906 03q9032 9 r n 8 Y Y Z O F 9 s 3 U I n U k al E U h rl P B al rn U 2 s4 al u rn Is : 444 rl a 7 teala al575 aom rn rn rn a .rl .rl .rl .rl u333 3 0000 rl -0 .rl u4 al a al 2 CL .rl
21、-5 8 k O 3 k O O a u4 O al o e al a .rl 3 w rl Cdl Y c 3 - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-8-63369 13 m 7799706 03q9033 O m 4 8 t ri P O0 o 04 a al C .rl vi al Q al Z Co b C al ci le 1 e al Q m C a 4 .“, B n k k 0 O a rcI O 10 Pro
22、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I.- d Ir O d li E td aJ U m ai o 10 .d cl 8 CI t 8 Flrn mm O00 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ti c O 2 O 5 1 - MIL-B-63369 13 9799906 03
23、47035 LI I I . . O00 004 a .A cull: 5 .? a dI - s- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- v MIL-E-63369 13 m 7997906 0349036 6 m MIL-B-63369 (AR) 4.4.3 Testing. Testing is described in the First Article and Quality Conformance Inspection Ta
24、bles. J 4.4.4 Inspection equipment. The inspection equipment required to perform the inspections and tests prescribed in this specification is identified in the Paragraph Reference/Inspection Method column in the tables starting with paragraph 4.4.2.1. The contractor shall submit for approval, inspe
25、ction equipment designs in accordance with the terms of the contract. See section 6 of MIL-A-48078 and 6.3 herein. 4.5 Test method and procedures 4.5.1 Materials, components and processes. Compliance with all requirements of Section 3 of this specification shall be ascertained by current and continu
26、ing examination of inspection and test data to determine that all components (parts, subassemblies, and materials) have been inspected and tested and found to comply with their respective drawing and specification requirements, and that all specified manufacturing processes have been followed. 4.5.1
27、.1 Visual and mechanical inspections. The visual, manual and mechanical inspections and tests shall verify compliance with requirements of Sections 3 and 5 of this specification in accordance with 4.4.2 herein and Table I. 5. PACKING 5.1 Preservation and packaging. Packaging shall be in accordance w
28、ith MIL-STD-1188. 5.2 Packing. Packing shall be in accordance with MIL-STD-1188. 5.3 Marking. Marking shall be in accordance with MIL-STD-1188. 6. NOTES 6.1 Intended use. The booster assembly covered by this specification is used in the Rocket Motor Assembly and is a component of the Demolition Kit
29、Cratering, Training, XM270. 6.2 Ordering data. See MIL-A-48078. 6.3. Submission of inspection equipment designs for approval. See MIL-A-48078. Submit equipment designs as required to Commander, U.S. Army Research and Development Command, ATTN: DRDAR-QAA-I, Dover, New Jersey 07801. 13 Provided by IHS
30、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-6.4 Drawings. Drawings listed in Section 2 of this specification under the heading U.S. Amy Research and Development Command (ARRADCOM) may also include drawings prepared by, and identified as Edgewood Arsenal, Frankf
31、ord Arsenal, Rock Island Arsenal or Picatinny Arsenal drawings. prepared by these activities is now under the cognizance of ARRADCOM. Technical data originally 6.5 Distribution of armnunition data cards. Distribution of data cards shall include the following: Commander, ARRADCOM, ATTN: DRDAR-QAA-M, Dover, New Jersey 07801. Custodian: Army-AR Preparing Activity: Amy-AR Project No. : 1375-Al85 *US. GOVERNMENT PRINTING OFFICE: 1981-703-029/1463 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
