1、MIL-C-30244G 13 W 7777706 0272733 7 W MIL-C-10244G 21 becember 1970 SUPERCEDING -.- L-C=0010244F(MU) 26 August i969 12 Januesy i965 MIL-C-10244E MILITARY SPECIFICATION CRYPTOGRAPHIC EQUIPNENT DESTROYER INCENDIARYy “4, M2Al This specification is mandatory for use by all De- partments and Agencies of
2、the Department of Defense. 1. SCOPE 1.1 This specification covers one ty-pe of equipment destroyer. 2. APPLICABLE DOCIJMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SP
3、ECIFICATIONS FEDERAL IT-W-572 - Wood Preservative, Water Repellant, PPP-B-601 - Boxes, Wood , Cleated-Plywood . PPP-3-621 - Boxes, Wood, Nailed and Lock-Corner. PPP-B-636 - Box, Fiberboard. PPP-F-320 - Fiberboard; Corrugated and Solid, Sheet Stock (Con- PPP-T-60 - Tape, Pressure-Sensitive Adhesive,
4、Waterproof , for tainer Grade) and Cut Shapes. Packaging. MILITARY MIL-P-u6 - Preservation , Methods of. MIL-B-U7 - Bags, Sleeves snd !I?ubing, Interior Packaging, MIL-B-2427 - Boxes y Ammunition Packing , Wood, Nailed. MIL-B-46506 - Box, Ammunition Packing , Wood, Wirebound. FSC 1375 Provided by IH
5、SNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL- C-.l02 4 46 STANDARDS MILITARY ML-STD-lO5 - Sampling Procedures and Tables for Inspection by Attributes. MIL-STD-129 - Marking for Shipment and Storage. MIL-STD-U - Lot Numbering of Ammunition. US ARMY MUNITIONS
6、 COMMWD . EDGEWOODARSENAL DL4-4-27 - Cryptographic Equipment Destroyer, Incendiary: TH4, IDL4-4-27 - Cryptographic Equipment Destroyer, Incendiary “4, Al. M2A1 - Inspection Data List. (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific pr
7、ocurement functions should be obtained from the procuring activity or as directed by the contracting officer. 1 3. REQUIREMENTS 3.1 Materials and components. 3.1.1 Materials. Ail materials cited on Drawing DL4-4-27 or on the subsidiary drawings shall conform to the specifications listed thereon, or
8、to the specific characteristics s.et forth on the drawings. 3.1.2 Components. All components of the cryptographic equipment destroyer shall conform to the specifications and drawings listed on Brawing DL4-4-27 and subsidiary drawhgs . 3.2 Assembly. The cryptographic equipment destroyer shall be load
9、ed * and assembled in accordance with Drawing D4-4-27. assembled with the destroyer until after the leakage test. electric wire shall not be exposed to acid fumes at any time (see 6.3). The fuzes shall not be Insulated 3.3 Main incendimy charge. The assembled destroyer shall be loaded with a main ch
10、arge mixbure conforming to Drawing Bi43-13-6 in four approximately equal increments individually tamped and pressed into the assembly (see 4.3). 8.5 pounds. - The weight of %he charge shall be no less tan 2 c I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
11、 IHS-,-,-MIL-C-102YYG 13 7777906 0272733 2 3.4 *iter charger c_on_tainer. The igniter charger assembly Drawing B4-4-28, shall be loaded with first fire mixture conforming to Drawing Bl43-9-4. when tested as specified in 4.4.4.1 (see 6.3). The weight of the mixture shall be no less than 27 grams 3.5
12、LeakaE. 3.5.1 Body. aie body assembly, Drawing D4-4-34 shall no% leak when subjected to an air pressure of 5 0.5 pound per square inch gage (psig) for a minhum period of i5 seconds and tested as Specified in 4.4.4,2(a). 3.5.2 Cover. The cover assembly less fuzes, Drawing D4-4-34 shall not leak when
13、subjected to an air pressure of 5 + 0.5 psig for a minimum period of i5 seconds and tested as specified in r.4.4.2(b). 3.5.3 Destroyer. The destroyer shall not leak when tested as specified in 4.4.4.ZZT. 3.6 ZJnctioninE. Burning of the incendiary filling shall be initiated by either type fuze and sh
14、all continue ntil the destroyer is completely consumed when tested as specified in 4.4.4.3. The term “completely con- sumed“ means that there shall be no unburned incendiary filling in the ash after burning ceases (see 6.3) . 3.7 Preproduction. Prior to the start of regular production, a pre- produc
15、tion sample of destroyers shall be produced in accordance with this specification for examination and test (see 4.3). 3.8 Workmanship. The destroyer shall be free from contamination (oil, grease or foreign matter) and damage such as dents, cracks or deformation which could affect its use. 4. QUALITY
16、 ASSURANCE .PROVISIONS 4.1 Responsibility for inspection. 4.1.1 Supplier s responsibility. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the perform- ance of all inspection requirements as specified herein. otherwise specified in the contract or order,
17、 the supplier may use his own or any other facilities suitable for the performance of the inspec- tion requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are de
18、emed necessaxy to assure supplies and services conform to specified requirements. Except as 3 ! .I I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-10244G 13 777770b 0272734 4 mc-10244g 4.1.2 Objective -.-I evidence. The supplier shall provide
19、 objective evidence acceptabl-e to the contracting officer that the reauirements of 3.1 and section 5 for which specific inspection has not been provided in this specification have been satisfied. 4.2 Classifica&;of inspections. (a) Preproduction inspection (see 4.). (b) Quality conformance inspecti
20、on (see 4.4). 4.3.1 class 2: style 4, type 1 of PPP-3-621; or tyue I, class S, grade A of NIL-E-46506. dimensions of the box shall be approximately 18-7/8 inches by 10-1/4 inches by 5-i/4 inches (length, width and depth resyectively) . Filler Fads fabri- cated from material conforming to grade V5c o
21、f PPP-F-320 shall segarate the contents from the top, ends, sides and bottom of the shipping container. Additional filler pads shall be used as necessary to insure a tight pack. The shipping container and all wood parts thereof, shall be fully immersed for a. minimum of three minutes in a water-repe
22、llent voud reservative Inside 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-C-102q4G 13 7777906 0272739 3 MIL-C-10244G conforming to composition A of IT-11-572. cryptographic equipment destroyers in the treated shipping containers, the pres
23、ervative shall be ciry as evidenced by the dryness test specified in MIL-B-2427. with the appendix of the applicable box specification using galvanized strapping. Prior to packing the The box shall be closed and strapped in accordance 5.3 %king. tract of order, the unit packages shall be marked in a
24、ccordance with MIL-STD-129. Shipping containers shall be marked in accordance with Drawing D4-4-58. application of the wood preservative to insure that al1 marking shall be clear, legible and permanent. In addition to any special marking required by the con- Sufficient drying time shall be allowed a
25、fter 5.4 Palletization. When specified in the contract or order, shipping containers shall be palletized and marked in accordance with Drawing D4-4-57. 6.1 Intended use. This item is intended for destruction of cryptographic equipment in an emergency. 6.2 Ordering - - data. Procurement documents sho
26、uld specify the following : (a) (b) Preproduction: Title, number and date of this specification. (1) (2) (3) Time allowed for supplier submission of sample for Govern- Name and address of test facility and shipping instruc- Time required for the Government to notify the supplier ment test and evalua
27、tion after award of contract. tions when testing is performed by the Government. whether or not to proceed with production. 6.3 Caution. Suppliers are hereby notified to take all necessary pre- caution to protect personriel while jeparin; incendiary mixtures, loading and tc king destroyers. 6.4 Comp
28、onent specification. - _.- The following specifications reflect the components required for the manufacture of the cry-ptographic equipment destroyer: MIL-F-10915 - Fuze, Hand Grenade, I&?OJAl, IGO7A1 and M210, . MIL-F-11673 - Fuze, Smoke Pot, Floating, Electric, M209. 9 Provided by IHSNot for Resal
29、eNo reproduction or networking permitted without license from IHS-,-,-NIL-C-JO24YG 13 m 9799906 0292740 T m Custodians: Army-m Navy - OS Air Frce - 70 Review activities : Navy - OS Air Force - 70 . Preparing activity: Army - Mu(EA) Project No. 1375-0147 10 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
