1、MIL-C-63114 (AR) 28 JULY 1977 MILITARY SPECIFICATION CARTRIDGE, 40MM, WHITE SMOKE, CANOPY, M680 MBTAL PARTS FOR AND LOADING, ASSEMBLING AND PACKING This: specification is approved for use by the U.S. Army Armament Research and Development Command and is available for use by all Departments and Agenc
2、ies of the Department of Defense. 1, . SCOPE 1.1 This specification contains requirements not normally covered by th-e drawings and provides quality assurance provisions for the fabrication of parts and load- ing, assembling and packing for Cartridge, 40MM, White Smoke, Canopy, M680. 2. . RPPLICABLE
3、 DOCUMENTS 2.1 . IssUes. wf “dcuhiekits. - The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein. SPECIFICATIONS MILITARY MIL-P-223 - Black Powder MIL-C-5541 - Chemical F51m and Chemical
4、 Film MIL-A-48078 - Ammunition, Standard Quality Materials for Aluminum and Aluminum Alloys Assurance Provisions, General Specification For FSC: 1310 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed
5、to: Commander, US Army Armament Research and Development Command, Attn. DRDAR-QA, Dover, New Jersey 07801 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Provided by IHSNot for ResaleNo reproduction or netwo
6、rking permitted without license from IHS-,-,-MIL-C-h3LLY L3 906 03Y39LL 7 E! ._ MIL-C-63114 (AR) STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MIL-STD-331 - Fuze and Fuze Components, Envi- ronmental and Performance Tests for MIL-STD-1169- Packaging, Pac
7、king and Marking for Shipment of Inert Ammunition Components MIL-STD-1234- Pyrotechnics Sampling, Inspection and Testing DRAWINGS (See 6.8) U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND 9317512 - Cartridge Assembly, 40MM, White Smoke, 9209204 - Box, Ammo, Metal for Cartridge, 9209205 - Box, Wi
8、rebound, Packing, Ammunition Canopy, M680 40MM, White Star, Cluster or Smoke Canopy or Parachute for Cartridge, 40MP4, White Star, Cluster or Smoke Canopy or Parachute INSPECTION EQUIPMENT DRAWINGS 9202770 - Chamber Gage 9202783 - Alignment Check 8827895 - Limit Check Provided by IHSNot for ResaleNo
9、 reproduction or networking permitted without license from IHS-,-,-MIL-C-63114 13 7797906 0343712 7 * MIL-C-63114 (AR) AURICAN SOCIETY FOR TESTING AND MATERIALS ASTM B 117-73 - Standard Method of Salt Spray (Fog) Testing (Application for copies should be addressed to: American Society for Testing an
10、d Materials, 1916 Race Street, Phila- delphia, Pa. 19103) 3. . FSQUIREMENTS 3.1 . Material. - Materials shall be in accordance with the applicable drawings and specifications. 3.2 Cartridge. - The cartridge shall comply with ail requirements specified on Drawing (Dwg.) 9317512, all asso- ciated draw
11、ings, and with all requirements specified in applicable specificaitons. 3.3 Transportation vibration. - The cartridge shall comply with the following requirements: 3-3.1 The cartridge shall be safe to transport following this test (See 6.5). 3.3.2 There shall be no evidence of external damage to the
12、 cartridge that will affect the intended function (See 6-61 . 3.4 Functioning. - The cartridge shall comply withthe following requirements; 3-4.1 Altitude. - The projectile shall function at an average altitude of 300 feet plus (+) 50 feet or minus (-) 25 feet with no item below 200 feet. 3-4.2 . Bu
13、rning f smoke asseinbly. - The smoke assembly shall asnite and emit smoke for 100 +- 20 seconds whihe sus- pended fromthe parachute at ambient temperature. 3-4.3 Parachute. - The parachute shall not separate from the smoke assembly at ejection or delay opening from time of ejection for more than 5 s
14、econds. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-(2-63114 (AR) 3.4.4 Firihg. - No projectile shall stick in the gun bore and the projectile shall not burst or eject the smoke assembly 50 feet from the launcher. :ements of 3.4.1, 3.4.2, 3
15、.4.3 and 3.4.4. 3.5 First article inspection. - This specification contains technical provisions for first article inspec- tion. Requirements for the submission of first article samples by the contractor shall be as specified in the contract. 3.6 Workmanship. - All parts and assemblies shall be fabr
16、icated, loaded and assembled in a thorough, workmanlike manner. They shall be free of burrs, sharp edges, cracks, dirt, grease, rust and other foreign matter, The cleaning method used shall not be injurious to any parts, nor shall the parts be contaminated by the cleaning agents. surface coatings sh
17、all be continuous; however, a few light scratches not exposing base material may be permitted. All required marking and stampling shall be neat and sharply defined. Exterior . 4. QUALITY ASSURANCE PROVISIONS _. in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of
18、this detail specificaiton, 4,2 C1ssifi:catin: bf tnspectiohs. - nie following types of inspection shall be conducted on this item: a. First Article 1nspec.kisn b. Quality Conformance Inspection 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.3.1
19、Submission. - The contractor shall submit a first article as designated by the Contracting Officer for evaluation in accordance with the provisions of 4.3.2. sample shall consist of the following items in sample quantities as indicated. The first article . rescr-iption Dr.awing Quariti. ty 9243900 2
20、5 Body Disc anchor 9252374 Ogive 9317516 Smoke canisters 9252377 Disc, ejection 9252397 Case, Smoke . 9255798 Housing delay 9252378 (5 painted) 25 25 25 25 25 25 (5 for salt Parachute assembly 9252371. Smoke canister loading assembly 9252368 Smoke assembly 9252368 Delay loading assembly 9252369 Cart
21、 ridges 9317512 spray) 25 25 25 25 465(4440 to a Government Proving Ground for function- ing tests) 4.3.2 . Tnspectioils to be performed. - See MIL-A-48078 and Table I herein. 4.3.3 . Rejection. - See MIL-A-48078 and the following;- 4 . 3 .3 . 1 . Prm tn E .F c n E ul ul a O c L O L .I- n 07 Cu r- .
22、 * 5 =J.* - l W I- I O pr Any critical defects occur in any phase (See Table III). Average altitude of the total sample fails the applicable requirement (See 3 . 4 . 1) . samples shall be subjected to this test. jetted to this test. a. b. C. total of six (6) or more in the hot phase fail any of the
23、following: (1) Parachute failure (See 3.4.3) . (2) Item fails to function (See Table III), (3) Altitude less than 200 Et (Table ITI). Burning time shall be recorded for informational purposes (average) . 30 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
