1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, MEDAL OF VALOR, BUREAU OF ALCOHOL, TOBACCO AND FIREARMS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consis
2、t of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: DIAMETER: 5/8 inch (REF) THICKNESS (at edge): 0.085 inch + 0.00
3、5 inch INCH-POUND MIL-DTL-11484/223B 10 March 2010 SUPERSEDING MIL-DTL-11484/223A 27 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/223A Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Gove
4、rnment furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respe
5、ct to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-111) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
