1、INCH-POUND MIL-DTL-11484/27E 29 August 2008 SUPERSEDING MIL-DTL-11484/27D 27 September 1996 DETAIL SPECIFICATION SHEET LAPEL BUTTON, AWARD FOR DISTINGUISHED ACHIEVEMENT IN SCIENCE, NAVY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requireme
2、nts for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: Gold Plated, Rose Gold Plated, Matte Finish, Highlights Relieved. DIMENSIONS: DIAMETER: 11/16 inch (REF) THICKNESS (at edge): 0.055 inch + 0.005
3、 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/27E Page 2 of 2 2. Attaching device shall be prong w
4、ith pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custod
5、ian: Preparing activity: Army - IH Army - IH Navy NU (Project No. 8455-2008-168) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
