1、INCH-POUND MIL-DTL-11484/324 1 December 2008 DETAIL SPECIFICATION SHEET LAPEL BUTTON, NATIONAL INTELLIGENCE REFORM AWARD OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring
2、 the product described herein shall consist of this specification sheet, the latest issue of MIL-DTL-11484, and a request from the Office of the Director of National Intelligence. OBVERSE MATERIAL: Red Brass FINISH: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights and shal
3、l match The Institute of Heraldry (TIOH) Metal Finish Chip number 15. DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 9/16 inch (REF) THICKNESS: 0.080 0.01 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pic
4、k and flat ball or grip type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. AMSC N/A 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/324 Custodian: Preparing activity:
5、Army - IH Army - IH (Project No. 8455-2009-029) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
