1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/344 7 August 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, EARLY CAREER ACHIEVEMENT MEDAL, NASA This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product de
2、scribed herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: HEIGHT: 5/8 inch WIDTH: 19/32 inch THICKNESS (along top hoop): 0.086 inch 0.010 inch FINISH: 24K Gold Plated, Matte Finish, Polished Highlights,
3、 and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/344 Page 2 of 2 ATTACHING DEVICE: The attaching device shall be prong with pick and wing type clutch. The pron
4、g shall be centered on the reverse side and either fused or soldered to the lapel button. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The manufacturer may deviate from MIL-DTL-11484 by using nickel underplating prior to plating with 24K gold
5、. 3. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the National Aeronautics and Space Administration. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2012-114) NOTE: The activities listed above were inte
6、rested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
