1、INCH-POUND MIL-DTL-3628/251 15 February 2009 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, PRESIDENTS HUNDRED TAB, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of
2、 this specification sheet and the latest issue of MIL-DTL-3628. MATERIAL: Guilding Metal or Red Brass FINISH: Gold Plated Mirrorlike Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 6. DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 2 inches (REF) THICKNESS: 0.065 0.010
3、 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong and clutch type. Two prongs shall be located on the reverse of the badge 1-3/8 inches apart. 3. Enameled/epoxied areas shall be green as indicated. The color s
4、hall conform to TIOH Hard Enamel Color Chip Number 12. When hard enamel is used, the material requirement shall be gilding metal. When epoxy is used, the material requirement shall be gilding metal or red brass AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking
5、permitted without license from IHS-,-,-MIL-DTL-3628/251 Page 2 of 2 Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2009-046) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
