1、 AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, DISTINGUISHED MARKSMAN, USMC This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specifica
2、tion sheet and the latest issue of MIL-DTL-3628. MATERIAL: PENDANT: Gilding Metal SUSPENSION BAR: Red Brass 85/15 (UNS Alloy No. C-230) or Gilding Metal FINISH: PENDANT: OBVERSE: Hard Epoxy, 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Fin
3、ish Chip Number 8. REVERSE: 24K Gold Plated, Mirror-Like Polished and shall match TIOH Metal Finish Chip Number 6. INCH-POUND MIL-DTL-3628/35F 08 January 2013 SUPERSEDING MIL-DTL-3628/35E 15 November 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,
4、-,-MIL-DTL-3628/35F Page 2 of 3 SUSPENSION BAR: OBVERSE: 24K Gold Plated, Matte Finish, Polished Highlights and shall match TIOH Metal Finish Chip Number 8. REVERSE: 24K Gold Plated, Mirror-Like Polished and shall match TIOH Metal Finish Chip Number 6. DIMENSIONS: HEIGHT (Overall): PENDANT: 1-33/64
5、inches (REF) SUSPENSION BAR: 5/16 inch (REF) WIDTH (Overall): PENDANT: 1-9/32 inches (REF) SUSPENSION BAR: 1-7/8 inches (REF) THICKNESS: (At rim): PENDANT: 0.080 inch + 0.010 inch SUSPENSION BAR: 0.055 inch + 0.010 inch EPOXY: Hard epoxy resin shall be applied as indicated below, and shall match TIO
6、H Hard Enamel Color Chip Number listed: TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Black #26 See Picture White #28 See Picture ATTACHING DEVICE AND LUGS: 1. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in length and shall be fabricated from 0.044 inch + 0.005 inch diamete
7、r wire. 2. The attaching device shall be prong and Flat ball clutch type. 3. The prongs and clutch shall be located on the horizontal center line on the back of the suspension bar equidistant from each end and 1- 1/4 inch + 1/32 inch apart. 4. Lugs are integral NOTES: The term (REF) refers to the me
8、asurements taken from the Government furnished hub or die. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted witho
9、ut license from IHS-,-,-MIL-DTL-3628/35F Page 3 of 3 Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activity: (Project No. 8455-2013-045) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
