1、AMSC N/A Page 1 of 3 FSC 8455 INCH-POUND MIL-DTL-3628/37F 15 August 2009 SUPERSEDING MIL-DTL-3628/37E 15 November 1996 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, LAUCHHEIMER TROPHY, MARINE CORPS This specification is approved for use by all Departments and Agencies of the Department of Defense
2、. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Gold -2: Silver -3: Bronze MATERIAL: -1, -2: Red Brass -3: Gilding Metal FINISH: OBVERSE: -1: Gold Plated, Matte Finish, Polished Highlights and
3、shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. -2: Silver Plated, Lightly Oxidized, Relieved, Polished Highlights and shall match TIOH Metal Finish Chip Number 15. -3: Lightly Oxidized, Relieved, Polished Highlights. Provided by IHSNot for ResaleNo reproduction or networkin
4、g permitted without license from IHS-,-,-MIL-DTL-3628/37F Page 2 of 3 REVERSE: -1: Gold Plated, Mirror-like Polished -2: Silver Plated, Mirror-like Polished -3: Mirror-like Polished DIMENSIONS: HEIGHT (overall): ASSEMBLED: 1-7/8 inches (REF) PENDANT: 1-1/2 inches (REF) SUSPENSION BAR: 11/32 inch (RE
5、F) WIDTH (overall): PENDANT: 1-1/32 inches (REF) SUSPENSION BAR: 1-15/32 inches (REF) THICKNESS (at rim): PENDANT: 0.055 inch + .005 inch SUSPENSION BAR: 0.075 inch + .005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The lugs are integra
6、l. 3. The connecting links shall be formed from 0.040 inch + 0.002 inch diameter wire, shall be oblong in shape and 5/16 inch + 1/64 inch in width. 4. The attaching device shall be prong and flat ball clutch type. Nickel plated flat ball clutches shall be used for Dash No. -2 and red brass flat ball
7、 clutches shall be used for Dash No. -1 and -3. The prongs shall be located on the horizontal center line of the back of the suspension bar equidistant from each end and 1-3/32 inch + 1/32 inch apart. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-M
8、IL-DTL-3628/37F Page 3 of 3 CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these
9、notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH Navy MC Project No. (8455-2009-097) Review
10、 activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
