1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, ARMED FORCES EXPEDITIONARY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and th
2、e latest issue of MIL-DTL-3943. OBVERSE REVERSE DASH NO. -1: Regular Size -2: Miniature Size MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) FINISH (-1 and -2): Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. INCH-POUND MIL-DT
3、L-3943/230A 04 October 2012 SUPERSEDING MIL-DTL-3943/230 30 June 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/230A Page 2 of 2 DIMENSIONS: DIAMETER (Excluding lug): -1: 1-1/4 inches (REF) -2: 5/8 inch (REF) THICKNESS (At thickest
4、 point): -1: 0.145 inch + 0.010 inch -2: 0.105 inch + 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The specification slash sheet ribbon for the pendant drape is MIL-DTL-11589/12. 3. The specification slash sheet for the lapel butto
5、n is MIL-DTL-11484/49. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army IH Air Force 11 Navy NU Review activities: (Project No. 8455-20
6、12-077) Navy MC, CG1 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
