1、AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, KUWAIT LIBERATION, GOVERNMENT OF KUWAIT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification
2、 sheet and the latest issue of MIL-DTL-3943. DASH NO: -1: Regular Size -2: Miniature Size MATERIAL: Red Brass (UNS Alloy Number C-23000) FINISH: Oxidized, Buffed Relieved, Matte Finish, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. INCH-POUND MIL-DTL-3943/250B 22 Novem
3、ber 2010 SUPERSEDING MIL-DTL-3943/250A 20 January 1999 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/250B Page 2 of 3 DIMENSIONS: DIAMETER: -1: 1-9/16 inches (REF) -2: 3/4 inch (REF) HEIGHT (including suspension bar): -1: 2-1/8 inches
4、(REF) -2: 1-1/16 inches (REF) THICKNESS: -1: 0.100 inch + 0.005 inch -2: 0.080 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The epoxied areas shall be located at the bottom of the medal design, in the shield-shaped portion o
5、f the bird. Enamel may be used in lieu of epoxy. Epoxy shall conform to the following TIOH Hard Enamel Color Chip Numbers: 3. Interior center of attaching wreath and ribbon bar shall be pierced. 4. Medal set shall consist of a regular size medal, a miniature size medal, and a ribbon all packaged in
6、a presentation case conforming to MIL-C-14633, Type XVI with a Class 1 or 1A pad. 5. The pendant shall be lacquered. 6. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/466. 7. The top bar of the suspension bar shall have a 3/16 inch 1/32 inch notch at the center to
7、 facilitate attaching the pendant drape. BLACK #26 RED #1 GREEN #12 WHITE #28 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/250B Page 3 of 3 CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines
8、to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content
9、 irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU Review activities: (Project No. 8455-2011-004) Navy - MC, CG1 DLA - CT NOTE: The activities listed above were interested in this document
10、as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
