1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, ARROWHEAD This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and the lat
2、est issue of MIL-R-41819. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: (-1, and -2) Red Brass, 85/15 (UNS Alloy No.C-230) or Gilding Metal 95/5 (UNS Alloy C-210) FINISH: (-1 and -2) Cooper Flash (C-230 only) Oxidized, Relieved, Polished Highlights. INCH-POUND MIL-DTL-41819/12F 25 February
3、2013 SUPERSEDING MIL-DTL-41819/12E 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/12F 2 of 2 DIMENSIONS: HEIGHT: -1: 1/4 inch (REF) -2: 1/8 inch (REF) WIDTH: -1: 1/8 inch (REF) -2: 1/16 inch (REF) THICKNESS (At thicke
4、st point): -1: 0.047 inch + .005 inch -2: 0.031 inch + .005 inch ATTACHING DEVICE: 1. The attaching device shall be a staple type prong. 2. The prong shall be located on the reverse side of the ribbon attachment 5/32 inch + 1/64 inch from the bottom for -1 and 3/32 inch + 1/64 inch from the bottom f
5、or -2. NOTES: The term (REF) refers to the measurements taken from the Government furnished hub or die. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activit
6、y: Army - IH Army - IH Air Force - 11 Review activity: (Project No. 8455-2013-084) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
