1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, LETTER “A” This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and the la
2、test issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No.C-230) FINISH: Oxidized DIMENSIONS: HEIGHT: 1/4 inch + 1/64 inch (REF) WIDTH: 1/4 inch + 1/64 inch (REF) THICKNESS (At thickest point): 0.040 0.005 inch ATTACHMENT DEVICE: 1: The attaching device shall be a staple type prong. 2: The
3、prong shall be centered on the reverse side of the ribbon attachment in the center of the bar on the “A“. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Ribbon attachment “A“ shall be die cut. 3. Piercing shall be as indicated.INCH-POUND MIL-DT
4、L-41819/15E 25 February 2013 SUPERSEDING MIL-DTL-41819/15D 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/15E 2 of 2 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes wi
5、th respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activities: (Project No. 8455-2013-115) Coast Guard - CG1 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
