1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, MERITORIOUS SERVICE, U.S. BORDER PATROL This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this
2、specification sheet and the latest issue of MIL-DTL-41819. MATERIAL: Red Brass FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: HEIGHT: 27/32 inch WIDTH: 5/16 inch THICKNESS (at thickest point): 0.072
3、0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. INCH-POUND MIL-DTL-41819/43A 5 February 2010 SUPERSEDING MIL-DTL-41819/43 5 January 2001 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI
4、L-DTL-41819/43A Page 2 of 2 2. Attaching device shall be 2 prongs located on the reverse side of the ribbon attachment, 1/32 inch from each end. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of t
5、he changes. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-031) DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
