1、MILITARY SPECIFICATION HOOK (MODIFIED) 1. SCOPE 1.1 This specification covers requirements , quality assurance provisions, and the preparation for delivery cri- teria for one type of hook (modified) for use on handling device H4220 and H4224. 2. APPLICABLE DOCUMENTS 2.1 The following documents, of t
2、he issue in effect on date of invitation for bids or request for proposals, form a part of this specification to the extent specified herein: SPECIFICATIONS MILITARY MIL-P-116 - Preservation, Methods of STANDARDS * MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by Attributes MI
3、L-STD-1168 - Lot Numbering of Ammunition MIL-STD-1169 - Packaging, Packing and Marking for Shipments of Inert Ammunition Components Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-H-48215 11 E 9999906 0317521 7 W MIL-H-48215 (MU ) DRAWINGS PICATI
4、NNY ARSENAL 8808362 - Packing and Marking for Storage 8866673 - Hook 8866674 - Hook (Modified) 8883536 - Bag, Packing for Repair Parts EL-8866674 - Equipment List and Shipments (Copies of specifications, standards, drawings, and publica- tions required by suppliers in connection with specific procur
5、ement functions should be obtained from the procuring activity or as directed by the contracting officer.) 3. F33QUIREMENTS 3.1 Materials. The contractor shall furnish objective evidence (see 6.2) that the material complies with the speci- fications listed on the applicable drawing. ments specified
6、on the drawing (dwg) 8866674, with all re- quirements specified herein, and with the requirements of all applicable specifications to the extent specified on the drawing and herein. 3.2 Assembly. The hook shall comply with all require- 3.3 Workmanship. 3.3.1 Plastic and metal characteristics. All co
7、mpo- nents shall be free from cracks, splits, cold flow, shrinkage, cold shuts, inclusions, porosity, or any similar characteristic. 3.3.2 Threads. Threads shall be full and undamaged for the entire minimum length or depth as required on the applicable drawing. 3.3.3 Burrs. Parts shall be free from
8、burrs. 3.3.4 Foreign matter. Parts shall be free from chips, dirt, grease, rust, corrosion, or any embedded foreign ma- terial. jurious to any of the parts, nor shall the parts be con- taminated by the cleaning agent. 3.3.5 Cleaning. The cleaning method shall not be in- 4 QUALITY ASSURANCE PROVISION
9、S 4.1 Responsibility for insQection. Unless otherwise specified in the contract or purchase order, the suppl.l:er is responsible for the performance of all inspection re- quirements as specified herein. Except as otherwise 2 Provided by IHSNot for ResaleNo reproduction or networking permitted withou
10、t license from IHS-,-,-MIL-H-48215 (MU) specified in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the
11、 inspections set forth in the speciication where such inspections are deemed necessary to assure supplies and services conform to prescribed require- ments. 4.2 First article inspection. Not applicable. 4.3.1 Lot formation. 4.3.1.1 Production lot. A lot shall consist of parts and assemblies produced
12、 by one manufacturer in one unchanged process, in accordance with the same drawing, same drawing revision, same specification and same specification revision. Drawing, specification and process changes not affecting safety, performance, storage, or interchangeability, as determined by the Government
13、, shall not necessitate changing the lot interfix number. assignment of lot numbers shall be in accordance with MIL- STD-1168. tion, size, and presentation is described in MIL-STD-105, Section 5. and a batch shall mean an inspection batch for the purpose of this specification. lot or batch is to be
14、presented and identified by the con- tractor, shall be designated or approved by the Government representative. The criteria and procedures for the 4.3.1.2 Inspection lot. A lot or batch and its forma- Accordingly, a lot shall. mean an inspection lot The manner in which each inspection 4.3.2 Product
15、 inspection examination. Critical characteristics shall require 1.00 percent inspection of all items in the inspection lot. A sample shall be selected at random from each inspection lot in accordance with the ap- placable major or minor characteristic table (see Table I and Table IT) and inspected f
16、or all characteristics in the applicable classification. sample found to be defective shall reject the inspection lot Sequence for the inspection of characteristics in each class fication need not be followed as long as all characteristic inspections are performed. Any characteristics in the 3 i- Pr
17、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-H-Lt235 33 W 799770b 0337524 2 Critical: None defined. Major 101. Preservation, packaging, packing and
18、 marking in accordance with MIL-STD-l169 Visual-Manual Minor; None defined. 4.3.2-1.3 Bas, Dackins and markinu for reoair Darts Critical: None defined. I Major 101. Material (see 3.1). . Visual 102, Length before packing, min.;. * Measure 103. Width before packing, min * Measure 104. Properly packed
19、. . Visual-Mauai 105. Proper heat seal. Visual-Manual 106. 107. Objective evidence (see 6.2) for No tear or hole in bag Visual heat seal test in accordance with MIL-P-116. .Visual “Measure with suitable scale. I Minor 201. Proper marking Visual 202. Workmanship (see 3.3). .Visual-Manual I 4.3.2.1.4
20、Packincr and markina for storacre and Critical: None defined. I- Major 101. Gross load weight, max, .* Measure 103. Correctly packed . Visual-Manual 104. Material (see 3.1) Visual *Measure with suitable scale- 102. Contents tight in package . Manual Provided by IHSNot for ResaleNo reproduction or ne
21、tworking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - MIL-H-48215 (MU) 5.2.1.2 Level C. The hook shall be packed in accordancs 5.2.2 Packing. 5.2.2.1 Level A and C. 5.2.3 Marking, Marking shall be as speci
22、fied in 6. NOTES 6.1 Ordering data. Procurement documents should specify 6.1.1 Procurement requirements. with dwg 8808362 except that the moisture barrier may be omit ted. The hook shall be packed in accordance wth dwg 8883536 and 8808362. accordance with dwg 883536 and 8808362 as applicable. the fo
23、llowing: a. b. Production or Repair Parts. C. Title, number, and date of this specification. Selection of applicable level of packaging and packing required (see 5.1 and 5.2). specified in 4.3.4.1 will be delivered as identified on a numbered DD Form 1664 when specified on a DD Form 1423 incor- pora
24、ted in the contract. control and inspections which can be verified. contractor shall obtain approval from the Commander, Picatinny Arsenal, Dover, New Jersey 07801, ATTN: 6 .1.2 Contract data requirements (see 4.3.4.1) Data 6.2 Objective evidence. Records of contractor quality 6.3 Acceptance inspection equipment (see 4.3.4.1) . The SMUPA-QA-N-I. Custodian: Preparing Activity: Amy - MU Army - MU Project No. 1190-AO57 r; L- ./ 7 f? U. S. GOVERNMENT PRINTING OFFICE: 1973-713- T46/1373 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
