1、- MIL-P-6330b 13 99999Ob 0347821 4 /Sd 3 74 7, MIL-P-63306 (AR) 29 JUNE 1979 MILITARY SPECIFICATION PRIMER ELECTRIC, M83 METAL PARTS FOR (ALTERNATE) This specification is approved for use by the U.S. Army Armament Research and Development Command, and is available for use by all Departments and Agen
2、cies of the Department of Defense. SCOPE 1. - 1.1 This specification covers the metal parts for an 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date alternate design of Primer, Electric, M83. of invitation for bids or request for proposal, form a part of this specifi
3、cation to the extent specified herein. SPECIFICATIONS MILITARY MIL-A-48078 - Ammunition, Standard Quality Assurance Provision, General Specification For STANDARDS MIL I TARY MILrSTD-1169 - Packaging, Packing and Marking for Shipment of Inert Ammuni-tion Components 1. FSC: 1390 Beneficial commenta (r
4、eeommsndations, additions, deletions) and any pertinent data which may be of um in improving thin document should be addressed to: Commander, US Army Armament Research and Development Commuid, Ath DRDAR-QA, Dover, New Jersey O7801 by using the self-addressed Standaidization Document Improvement Irop
5、oSol (DD Form 1426) appearing at the end of this document or by letter. . r- r THIS DOCUMENT CONTAINS PAGES. -. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-63306 13 7777706 0347822 b 9 MIL-P-63306 (AR) DRAWINGS ARMY 9327339 - Head Primer 93
6、27342 - Plug, Closing 8839509 - Retainer 9327340 - Body 8831022 - Plug (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contracting officer). 3.
7、 REQUIREMENTS 3.1 Material.-Materials shall be in accordance with 3.2 Metal parts components.-The metal parts components applicable drawings and specifications. shall comply with all requirements specified on applicable drawings and with all requirements specified in applicable spec i fi cat i ons .
8、 3.3 Hydrostatic test.-The primer tubing shall withstand the application of a minimum (min.) hydrostatic pressure with- out rupture or indication of flaws, as evidenced by leaks, and without permanent deformation beyond drawing requirements, when tested as specified in 4.5.1 (see 6.4). sharp edges,
9、cracks, unblended radii, surface defects, dirt, grease, rust, corrosion products and other foreign matter. The cleaning method shall not be injurious to any part nor shall the parts be contaminated by the cleaning agent. All required markings shall be neat and sharply defined. 3.4 Workmanship.-All p
10、arts shall be free of burrs, chips, 3.5 First article inspection.-This specification makes provisions for first article insDection. Reauirements for submission of first article samples by the contractor shall be as specified in the contract. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for ins
11、pection and standard quality assurance provisions.-Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this detail specification. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-
12、,-,-MIL-P-b330b 13 777790b 0347823 I - MIL-P-63306 (AR) 4.2 Classification of inspection.-The.following types of inspection shall be conducted on this item. a. First Article Inspection b. Quality Conformance Inspection 4.3 First article inspection 4.3.1 Submission.-The contractor shall submit a firs
13、t article sample as designated by the Contracting Officer. The first article sample shall consist of ten (10) complete sets of parts (.e., ten (10) each of every component). The first article sample shall be evaluated in accordance with the provisions of 4.3.2 and 4.3.3. 4.3.2 Inspections to be perf
14、ormed.-See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection.-See MIL-A-48078. 4.4 Quality conformance inspection 4.4.1 Inspection lot formation.-Inspection lots shall comply with lot provisions of MIL-A-48078. 4.4.2 Examination.-Unless otherwise specified in the classifcation of defects and
15、 test tables, sampling plans for major and minor defects shall be in accordance with MLL-STD-105, Inspection Level II. Equipment necessary for the performance of the inspections listed shall be in accordance with 4.4.4. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without l
16、icense from IHS-,-,-i3 .rl.rl a R Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a E t w P E 8 c 2 P MIL-P-63306 13 7979706 03LI7829 7 r P o e e L ?Y mmmm by ho O000 O000 ? CI sl w al a al a 2 U as alal 9 Provided by IHSNot for ResaleNo reproduction
17、 or networking permitted without license from IHS-,-,-MIL-P-63306 13 7779906 0347830 5 I I- z Ell d rl 8 rl P r F E 2 h L C -1 NNNN mmmm NNNeN . mmmmm N“ O00 O00 PPP a o) G .r( u-i o) a QI z g QI U 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-N
18、 B rl h E rl (d u rl u +I &I U P w o f s rl-lmumabamorlN m 000000000drlrl rl rlrlrldrldrlrldrlrlrl rl i! rlwm ir , Y P i E L U - MIL-P-63306 13 7777706 0347833 7 n al 3 rl u u 7 &I u a al a Id zu -0 rlz al u borna al (d -alo) c3UHVI gal d W O O WWNNWWNWWWM WWW 00000000000 O00 O00 rlrlrl 00000000000
19、? ? N $2 VIU n 2 h 1J O. 11 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UIL-P-b3306 13 m 7779706 0347832 7 m r u n Y Y 8 I Y d 12 -1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-633Q6 (
20、AR) 4.4.3 Testing.-Testing is described in the First Article and Qual.ity Conformance Inspection tables. 4.4.4 Inspection equipment.-The inspection equipment required to perform the inspections and tests prescribed in this specification is identified in the Paragraph Reference/ Inspection Method col
21、umn in the tables starting with paragraph 4.4.2.1, and the test method paragraphs (see 4.5). The contractor shall submit for approval, inspection equipment designs in accordance with the terms oaf the contract. See Section 6 of MIL-A-48078, and Section 6.3 herein. 4.5 Test methods and procedures 4.5
22、.1 Hydrostatic test.-Prior to machining, the primer tubing shal-not less than five seconds at the minimum hydrostatic pressure as calculated by the following formula: p = 1.8 St D Where: P = tests pressure ,n pounds per square inch (ps S = minimum specified yield strength, psi t = specified minimum
23、wall thickness in inches D = specified maximum outside diameter in inches 4.5.2 Protective coatings.-Procedures for testing, the cleaning of components and the application of protective coatings shall be in accordance with the criteria for testing as specified on the applicable component drawings an
24、d in the specification referenced thereon. 5. PREPARATION FOR DELIVERY 5.1 Packaging, p acking and marking.-The parts shall be packaged, packed and marked in accordance with MIL-STD-1169. NOTES 6. - 6.1 Intended use.-The components covered by this specification are intended for use in the M83 electr
25、ic primer (alternate). This is used on 105MM Cartridgs, M456A1 (HEAT) and M490 (TP). 6.2 Ordering data.-See MIL-A-48078. 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-P-63306 13 E 777790b 03Y7834 2 E - MIL-P-63306 (AR) 6.3 Submission of ins
26、pection equipment designs for approval - (See MIL-A-48018) .-Submit equipment designs as required, to Commander, ARRADCOM, ATTN: DRDAR-QAR-I, Dover, New Jersey 07801. 6.4 Hydrostatic test.-If the primer tubing procured for the bodies manufactured in accordance with this specification has been previously subjected to the hydrostatic test specified in this specification, a second hydrostatic test will not be required. Custod i an : ARMY-AR Preparing Activity: ARMY -AR Project Number: 1390-A199 14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
