1、 INCH-POUND MIL-PRF-63049B (MI) 25 November 2008 SUPERSEDING MIL-M-63049A (MI) Notice 2 5 June 2008 PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: LIST OF APPLICABLE PUBLICATIONS (LOAP) This specification is approved for use by the US Army Aviation and Missile Command (AMCOM), Department of the Army,
2、 and is available for use by all department and agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the requirements for the preparation of lists of applicable publications, referred to throughout this specification as LOAP. 2. APPLICABLE DOCUMENTS 2.1 General. The d
3、ocuments listed in this section are specified in sections 3, 4 or 5 of this specification. This section does not include documents listed in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of t
4、his list, documents users are cautioned that they must meet all specified requirements documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army Aviation and Missile
5、Command, Attn: AMSRD-AMR-SE-TD-SA, Redstone Arsenal, AL 35898-5000. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at http:/assist.daps.dla.mil. AMSC 9055 AREA TMSS DISTRIBUTION STATEMENT A. Approved for public r
6、elease; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 2 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of t
7、his document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE STANDARD MIL-STD-38784 Standard Practice for Manuals, Technical: General Style and Format Requirements (Copies of this documen
8、t are available online at http:/assist.daps.dla.mil/quicksearch.) 2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein (except for related specification sheets), the text of this docume
9、nt takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS. 3.1 Preparation. Except as otherwise specified herein, the general requirements for preparation of the LOAP shall be in accordance with M
10、IL-STD-38784. 3.2 Content and arrangement. 3.2.1 Basic publication. The LOAP shall be arranged as follows: Cover page Table of contents Section I General Information Section II Technical Manuals Section III Repair Parts and Special Tools Lists Section IV Modification Work Orders Section V Technical
11、Bulletins Section VI Lubrication Orders Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 3 Section VII General Type Equipment Publications 3.2.1.1 Cover Page and table of contents. The requirements of MIL-STD-38784 are applicable.
12、In addition, the table of contents shall include “current as of date” (See 6.3.1) . 3.2.1.2 Section I General information. This section shall include text as prescribed. (See Figure 1.) 3.2.1.3 Section II Technical manuals. This section shall include all technical manuals except depot maintenance wo
13、rk requirements applicable to specific equipment covered by the LOAP, including installed and support equipment (See Figure 2). 3.2.1.4 Section III Repair parts and special tools lists (RPSTL). This section shall include all RPSTL applicable to specific equipment covered by the LOAP, including insta
14、lled and support equipment. 3.2.1.5 Section IV Modification Work Orders (MWOs). This section shall include all MWOs applicable to specific equipment covered by the LOAP, including installed and support equipment. The priority classification for time compliance will appear in parentheses immediately
15、following the title. 3.2.1.6 Section V Technical bulletins. This section shall include all technical bulletins applicable to specific equipment covered by the LOAP, including installed and support equipment. Where applicable, the priority classification for time compliance will appear in parentheses
16、 immediately following the title. 3.2.1.7 Section VI Lubrication orders (LO). This section shall include all LO applicable to specific equipment covered by the LOAP, including installed and support equipment. 3.2.1.8 Section VII General type equipment publications. This section shall include all gen
17、eral type equipment publications applicable to specific equipment covered by the LOAP, including installed and support equipment. Examples of publications covered by this category are those pertaining to painting, welding, etc. 3.2.2 Changes to basic LOAP. The requirements of MIL-STD-38784 are appli
18、cable. 3.2.3 Revisions. Revisions shall be prepared in the same manner and format as sthe prior issue. 3.2.4 Information to be excluded. A LOAP shall not include illustrations. 4. VERIFICATION. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-
19、63049B (MI) 4 4.1 The requirements of section 3 shall be verified by inspection. The inspection shall verify that the LOAP lists current editions of documents, with no rescinded or outdated publications. 5. PACKAGING. 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as sp
20、ecified in the contract or order (6.2). When packaging of material is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points
21、 packaging activities within the Military Service or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging
22、 activity. 6. NOTES. ( This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Intended use. The technical manuals prepared in accordance with the requirements of this specification are intended to enable concerned personnel to select, and
23、 become familiar with publications pertinent to the weapons system, equipment, or vehicle to which the publication applies. 6.2 Acquisition requirements. Acquisition documents should specify the following: a. Title, number, and date of this specification. b. Packaging requirements (see 5.1) c. Title
24、 and number of the LOAP. d. Whether reproducible copy or manuscript is required. 6.3 Definitions. 6.3.1 Current as of date. The date on which the information contained in the LOAP becomes available. 6.4 Technical Manuals. The requirement for technical manuals should be considered when this specifica
25、tion is applied on a contract. If technical manuals are required, specifications and standards that have been cleared and listed in DoD 5010.12.L, Acquisition Management Systems and Data Requirements List (AMSDL) must be listed on a separate contract Data Requirements List (DD Form 1423) which is in
26、cluded as an Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 5 exhibit to the contract. The technical manuals must be acquired under separate contract line item in the contract. 6.5 Subject term (Key word) listing. Compact Disk-Re
27、ad Only Memory (CD-ROM) Equipment publications List of Applicable Publications (LOAP) Lubrication Orders (LO) Modification Work Orders (MWO) Repair Parts and Special Tool Lists (RPSTL) Technical Bulletin (TB) 6.6 Changes from previous issue. Marginal notations are not used in this revision to identi
28、fy changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 6 TM 9-1425-500-L Section I General Information 1. Purpose. This publication is prepared to enable con
29、cerned personnel to determine those publications which apply to the equipment or weapons system they are responsible for and which they must have access to perform their assigned mission. 2. Arrangements. The publications listed in each section of this LOAP are arranged in numerical order by publica
30、tion number. For each publication listed the following information is provided; changes currently in effect, title of basic publication and date. Where applicable the priority classification will appear in parentheses following the title. 3. Security Classification. a. Publications classified SECRET
31、 or CONFIDENTIAL are identified by the symbols (S) or (C) preceding the number. The title or subject of a classified publication if unclassified is followed by (U). Classified titles of publications are not listed and the word (CLASSIFIED) will appear in the title column. Classified publications are
32、 distributed on a need-to-know basis. These publications must be safeguarded in accordance with AR 380-5. b. The symbol (O) preceding the number denotes a publication which is FOR OFFICIAL USE ONLY. Publications FOR OFFICIAL USE ONLY must be protected in accordance with AR 25-50. 4. Requisitioning o
33、f Publications. Additional copies of the publication listed herein which are required in the performance of your mission may be obtained by publication account holders from the U.S. Army Publishing Directorate at http:/www.apd.army.mil using the STARPUBS DDN Interface System (SDIS) or from the U.S.
34、Army Logistics Support Activity (LOGSA) website at https:/www.logsa.army.mil. 5. Reporting of Errors. The reporting of errors, omissions, and recommendations for improving this publication by the individual user is encouraged. Reports should be submitted on DA Form 2028 (Recommended Changes to Publi
35、cations) and forwarded direct to (enter complete mailing address of the equipment publications preparing activity). FIGURE 1. Sample Section I format Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 7 TM 9-1425-500-L Section II TEC
36、HNICAL MANUALS Publication Number Title Date TM 9-1430-510-12/1 Check Procedures for Radar Set 19 Aug 66 C1 through C5 AN/MPQ-37 (C) TM 9 -1430-510-12/2 Functional and Theory Schematics 23 Aug 66 C1 through C6 for Radar Set AN/MPQ-37 TM 9-1430-510-12/3 Radar Set AN/MPQ-37 19 Aug 66 C1 through C8 TM
37、9-1430-510-20 Schematics for Radar Set 23 Aug 66 C1 through C5 AN/MPQ-37 (C) TM 9-1430-510-34/1 Units of Radar Set AN/MPQ-37 5 Nov 63 C1 through C6 Tested at CW/Pulse Console (U) TM 9-1430-510-34/2 Radar Set AN/MPQ-37 27 Jun 67 C1 through C3 FIGURE 2. Sample Section II format. Provided by IHSNot for
38、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-63049B (MI) 8 CONCLUDING MATERIAL Custodian: Preparing activity: Army MI Army MI (Project TMSS 2009-001) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
