1、INCH-POUND MIL-R-48233A(MI) AMENDMENT 4 1 February 1991 SUPERSEDING AMENDMENT 3 16 July 1990 MILITARY SPECIFICATION ROD, STABILIZING, COATED FOR 2.75 INCH ROCKET MOTOR MKA/MK40 AND MODS This amendment forms a part of MIL-R-48233A, dated 24 June 1980, and is approved for use by all Departments and Ag
2、encies of the Department of Defense. PAGE 1 2.1 Delete and substitute: Ii2. 1 Government documents. I Add as new paragraph 2.1.1: “2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unles
3、s otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.21.“ Specification, Federal, delete “QQ-2-325, Zinc Coating, E-lectrodeposited, Requ
4、irement for.11 Beneficial comment statement, 4th line, delete “DRSMI-ED“ and substitute “AMSMI-RD-SE-TD-ST.“ Delete “3580911 and substitute “35898-5270. II PAGE 2 Standards, Military, delete “MIL-STD-1188, Commercial Packaging of Supplies and Equipment. II AMSMC N/A 1 of 6 FSC 1340 DISTRIBUTION STAT
5、EMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-R-48233A(MI) AMENDMENT 4 PAGE 3 Top of page, delete “MIL-A-45610B(NI)“ and substitute I1MIL-R-48233A(MI) .II Add under Drawing 920932
6、0: 9220809 13372501 13372504 Rod, Stabilizing Rod, Stabilizing, Coated Assembly Rod, Stabilizing Add the following paragraphs: “2.2 Non-Government publications. - The following document forms a part of this document to the extent specified herein. Unless otherwise specified, the issues of the docume
7、nts which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of the documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) .AS
8、TM EI 633 - Electrodeposited Coatings of Zinc on Iron and Steel (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1137.) (Non-Government standards and other publications are normally available from the organization
9、s that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedenc
10、e. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.“ 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-R-48233A (9) $3 D 9Ob 0967208 7 D 1 I MIL-R-48233A(MI) AMENDMENT 4
11、PAGE 5 4.1 Delete and substitute: “4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements (examinations and tests) as specified herein. Except as otherwise specified in the cont
12、ract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless diapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this specification where
13、such inspections are deemed necessary to ensure supplies and services conform to prescribed requirements.“ PAGE 6 Add paragraph 4.1.1, Responsibility for compliance. Renumber paragraph 4.1.1 to 4.1.2; renumber paragraph 4.1.2 to 4.1.3. “4.1.1 Responsibility for compliance. All items shall meet all r
14、equirements of sections 3 and 5. The inspection set forth in this specification shall become a part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibilility of ensuring th
15、at all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. Sampling inspection, as part of manufacturing operations, is an acceptable practice to ascertain conformance to requirements, however, this does not authorize submission of known defe
16、ctive material, either indicated or actual, nor does it commit the Government to accept defective material.“ PAGE 8 4.3.1, line 11, add land“ before “same specifications.“ Line 12, delete “and same submission of product as specified in MIL-STD-105. I 4.3.2a, line 1, delete “and minor. I Line 2., del
17、ete “MIL-STD-105“ and substitute “the ZERO acceptance number sampling plans specified in the following paragraphs.“ Line 3, delete “variables sampling plans in accordance with MIL-STD-414 or.“ 3 I 9 i1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
18、 ,I MIL-R-48233A (4) 13 W 9999906 0467209 9 E MIL-R-48233A(MI) AMENDMENT 4 PAGE 9 4.3.2c, line 1 and 3, delete “and minor.“ Line 4, delete “AQL“ and substitute “sampling plan table. 4.3.2f, delete in its entirety. PAGE 10 4.3.2.1, line 1, delete “(See drawing 9209320)“ and substitute “(see drawing 9
19、209320 or 13372501) .It 4.3.2.1, delete heading “AMT. OF INSP. AQL, 100% OR PARA. REF.“ and substitute “AMT, OF INSP. TABLE #, 100% OR PARA. REF.“ Delete “Group AQL 0.65% (101 and 102 only)“. Major 101 and 102, delete 1i0.65“ and insert “Table III.“ Delete all references to minor defects. PAGE 11 4.
20、3.2.2, line 1, delete “(see drawing 9220809 covering a detail of drawing 9209320 1 II and substitute (see drawing 9220809 or 13372504 covering a detail of drawing 9209320 or 13372501 respectively 1 . It 4.3.2.2, delete heading “AMT OF INSP. AQL, 100% or PARA. REF.“ and substitute “AMT. OF INSP. TABL
21、E #, 100% OR PARA REF.“ Delete “Group AQL 1.50% (101 thru 106 only).“ Major 101 through 106, delete “O. 65“ and substitute “Table III. I Delete all references to minor defects. PAGE 12 4.3.2.3, Delete entire paragraph. PAGE 13 4.3.2.4, line 2, delete “(drawing 9209320)“ and substitute II (drawing 92
22、09320 or 13372501 1. I 4.3.2.4, delete heading “AMT. OF INSP. AQL, 100% OR PARA REF.“ and substitute “AMT, OF INSP. TABLE #, 100% OR PARA REF.“ Delete “Group AQL 0.65% (101 and 102 only)“. Major 101 and 102, delete “0.65“ and insert “Table III.“ Delete all references to minor defects. 4 Provided by
23、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-R-48233A (4) 13 m 9999906 0467210 5 m MIL-R-48233A(MI) AMENDMENT 4 PAGE 14 4.3.2.5, line 1, delete “(see drawing 9220809)“ and substitute II (see drawing 9220809 or 13372504) . 4.3.2.5, delete heading “AMT OF I
24、NSP. AQL, 100% or PARA. REF.“ and substitute “AMT. OF INSP. TABLE #, 100% OR PARA REF.“ Delete llGroup AQL 1.50% (101 thru 106 only).“ Major 101 through 106, delete 65“ and substitute “Table III. II Delete all references to minor defects. PAGE 15 4.3.3.3, line 2, delete “ten (10)“ and substitute “Al
25、l.“ PAGE 16 4.3.3.5.1, line 2, delete “9220809“ and substitute “9220809 or 13372504. II 4.3.3.5.2, line 2, delete “9220809“ and substitute “9220809 or 13372504.“ 4.3.3.6, line 1, delete “(see drawing 9220809)“ and substitute “(see drawing 9220809 or 13372504).“ 4.3.3.6, line 7, delete “the samples“
26、and substitute “one sample. PAGE 17 4.4.1.1, line 4, delete “1/8 inch by 1/8 inch“ and substitute “1.25 inch by .125 inch.“ PAGE 18 4.4.3, line 1, delete “ten (lo).“ 4.4.4.1, line 5, delete “2 inches + 1/16 inches“ and substitute - - + .O62 inches.“ 5 Provided by IHSNot for ResaleNo reproduction or
27、networking permitted without license from IHS-,-,-MIL-R-Y233A (4) 13 999990b 04b72LL 7 500,001 and over MIL-R-48233A(MI) AMENDMENT 4 143 PAGE 19 Add Table III after paragraph 4.4.7: Table III 2 to 21 to 281 to 1201 to 3201 to 10,001 to 35,001 to 150,001 to 20 280 1200 3200 10,000 35,000 150,000 500,000 100% 20 47 53 68 77 96 119 5.1, delete “or commercial packaging. “ 5.1.2, delete in its entirety. Preparing activity: Army - MI Project No. 1340-A860 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
