1、*USACE / NAVFAC / AFCESA / NASA UFGS-02 83 19.00 10 (February 2010)-Preparing Activity: USACE SupersedingUFGS-02 83 19.00 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated April 2010*SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONSSECTION 02
2、83 19.00 10LEAD BASED PAINT HAZARD ABATEMENT, TARGET HOUSING Errata Aug 1996;Rev Ch. 7 - 1997) Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in HousingU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)40 CFR 745 Lead-Based Paint Poisoning Prevention in Certain Residenti
3、al StructuresUNDERWRITERS LABORATORIES (UL)UL 586 (2009) Standard for High-Efficiency Particulate, Air Filter Units1.2 DEFINITIONS1.2.1 AbatementMeasures defined in 40 CFR 745, Section 223, designed to permanently eliminate lead-based paint hazards.1.2.2 Target HousingResidential real property which
4、 is housing constructed prior to 1978, except housing for the elderly or persons with disabilities (unless any one or more children age 6 years or under resides or is expected to reside in such housing for the elderly or persons with disabilities) or any 0 bedroom dwelling.1.2.3 Child-Occupied Facil
5、ityReal property which is a building or portion of a building constructed prior to 1978 visited regularly by the same child, 6 years of age or under, on at least two different days, provided that each days visit lasts at least 6 hours, and the combined annual visits last at least 60 hours. Child-occ
6、upied facilities include but are not limited to, day-care centers, preschools and kindergarten classrooms.1.2.4 Lead-Based Paint HazardsPaint-lead hazard, dust-lead hazard or soil-lead hazard as identified in 40 CFR 745, Section 65.1.3 SYSTEM DESCRIPTION*NOTE: Show the lead-based paint abatement act
7、ivities and pertinent control techniques at appropriate places on project drawings. Enter the required work task information on the INDIVIDUAL WORK TASK DATA ELEMENT sheets at the end of this SECTION 02 83 19.00 10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without li
8、cense from IHS-,-,-section.*The work covered by this section includes work tasks, on the individual work task data sheets at the end of this section, and the precautions specified in this section for the protection of building occupants and the environment during and after the performance of lead ha
9、zard abatement activities.1.3.1 Protection of Existing Areas To RemainAll project work including, but not limited to, lead hazard abatement work, storage, transportation, and disposal shall be performed without damaging or contaminating adjacent work and areas. Where such work or areas are damaged o
10、r contaminated, restore work and areas to the original condition.1.3.2 Coordination with Other WorkCoordinate lead hazard abatement activities with work being performed in adjacent areas. Coordination procedures shall be explained in the Contractors Accident Prevention Plan and describe how the Cont
11、ractor will prevent lead exposure to other Contractors and/or Government personnel performing work unrelated to lead hazard abatement activities.1.3.3 Sampling and Analysis*NOTE: Specify the sampling and analysis necessary to characterize effectiveness of equipment and procedures to prevent migratio
12、n of contamination while lead hazard abatement activities are performed and to assure clearance/cleanup requirements have been achieved.Select from the methods below to specify the sampling and analytical requirements for this project.*Submit a log of the analytical results from sampling conducted d
13、uring the abatement. The log of results shall be kept current with project activities and shall be briefed to the Conracting Officer as analytical results are reported.1.3.3.1 Dust Wipe Materials, Sampling and AnalysisSampling shall conform to ASTM E 1728 ASTM E 1792. Analysis shall conform to ASTM
14、E 1613 and ASTM E 1644.1.3.3.2 Soil Sampling and AnalysisSampling shall conform to ASTM E 1727. Analysis shall conform to ASTM E 1613 and ASTM E 1726.1.3.3.3 Clearance Monitoring*NOTE: Review 40 CFR 745 (e)(8)(v)(A), (B) and (C) to determine the quantity and location of clearance SECTION 02 83 19.00
15、 10 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-samples for target housing, child occupied facilities.*a. Take dust wipe samples inside the lead hazard control area after the final visual inspection in the quantities and at the locations sp
16、ecified.(1) Floors _.(2) Interior Window Sills _.(3) Window Troughs _.b. Take exterior bare soil samples inside the lead hazard control area after the final visual inspection in the quantities and at the locations specified.(1) Near the building foundation _.(2) Nearby Play areas _.1.3.4 Clearance R
17、equirements*NOTE: Clearance criteria are as follows:Target housing and child occupied facilities.a) Building Interior:Floors - 40 micrograms/square foot.Interior Window Sills - 250 micrograms/square foot.Window Troughs - 800 micrograms/square foot.b) Building Exterior:Bare soils in play areas used b
18、y children under the age of 6 - 400 mg/kg.Bare soils, all other areas - 1200 mg/kg It is recommended that the designer ckeck with the project customer and state regulators to assure that the clearance criteria in this note are consistent with customer needs and state specific requirements.*Target ho
19、using and child occupied facilities clearance levels.(1) Floors _.(2) Interior Window Sills _.(3) Window Troughs _.(4) Bare soils in play areas accessible by children _.(5) Bare soils in all other areas _.1.4 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTA
20、L PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept SECTION 02 83 19.00 10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-to the minimum required for adequate quality cont
21、rol.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the su
22、bmittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects usin
23、g the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy,
24、 Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Contro
25、l approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-03 Product DataMaterials and EquipmentExpendable SuppliesQual
26、ifications; G; G, _Occupant Protection Plan; G; G, _SD-06 Test ReportsPressure Differential LogLicenses, Permits and Notifications; G; G, _Sampling and Analysis; G; G, _Abatement Report; G; G, _1.5 QUALITY ASSURANCE1.5.1 Qualifications and Organization ReportSubmit a qualification and organization r
27、eport. The report shall describe the qualifications of the certified supervisor, certified risk assessor, and certified abatement workers. Include in the report an organization chart showing the Contractors personnel by name and title and project specific responsibilities and authorities. The report
28、 shall describe the SECTION 02 83 19.00 10 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-qualifications of the laboratories selected for this project. The report shall be signed by the Contractor and the certified abatement supervisor to indi
29、cate that all personnel and laboratories comply with certification and experience requirements of this section and that project personnel have been given the authority to complete the tasks assigned to them.1.5.2 Personnel and Subcontractor Responsibilities and Qualifications1.5.2.1 Certified Abatem
30、ent SupervisorThe abatement supervisor shall be certified pursuant to 40 CFR 745, Section 226 and is responsible for development and implementation of the occupant protection plan, the abatement report and shall supervise lead hazard abatement work activities.1.5.2.2 Lead Hazard Abatement WorkersLea
31、d hazard abatement workers shall be certified pursuant to 40 CFR 745, Section 226 and shall be responsible for performing the labor necessary to complete the lead hazard abatement activities required in this contract.1.5.2.3 Certified Risk AssessorThe Certified Risk Assessor shall be certified pursu
32、ant to 40 CFR 745, Section 226 and shall be responsible to perform the clearance sampling, clearance sample data evaluation amd shall summarize clearance sampling results in a section of the abatement report. The risk assessor shall sign the abatement report to indicate clearance requirements for th
33、e contract have been met.1.5.2.4 Testing LaboratoriesThe laboratory selected to perform analysis on dust wipe, paint chip and soil samples shall be recognized by the EPAs National Lead Laboratory Accreditation Program (NLLAP).1.5.3 Regulatory Requirements*NOTE: This specification section is based on
34、 EPA 40 CFR 745, Section 227 requirements. The designer will need to research and specify the requirements of any other state, local or installation regulations that may affect lead hazard abatement activities specific to this project.*The following State and local statutes, regulations and requirem
35、ents apply to lead hazard abatement activities to be performed: State, _, Local _.1.5.4 Occupant Protection PlanThe certified supervisor shall develop and implement an Occupant Protection Plan describing the measures and management procedures to be taken during lead hazard abatement activities to pr
36、otect the building occupants/building facilities and the outside environment from exposure to any lead contamination while lead hazard abatement activities are performed.SECTION 02 83 19.00 10 Page 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.5
37、.5 Licenses, Permits and Notifications*NOTE: Consult with the customer, district engineering, construction and safety offices and all outside regulatory authorities (EPA, state, county, city) having jurisdiction over any part of the project to determine whether a license or permit is required and wh
38、o is responsible for submitting required notifications to various agencies. The designer then must make the decision if the required permits are to be obtained by the Contractor or the Government. If the Contractor is to provide the permits, include this paragraph and choose the appropriate brackete
39、d items. If the Government is to obtain the permits/licenses, delete this entire paragraph.*Certify and submit in writing to the Regional Office of the EPA states environmental protection agency responsible for lead hazard abatement activities _ and the Contracting Officer at least 10 _ days prior t
40、o the commencement of work that _ licenses, permits and notifications have been obtained. The Contractor is responsible for all associated fees or costs incurred in obtaining the licenses, permits and notifications.1.5.6 TrainingProvide training to meet 40 CFR 745 Subpart L requirements by an EPA ac
41、credited training provider; provide proof in the Qualifications and Organization Report showing that personnel have passed certification examinations for their respective disciplines, that fees for certification have been paid to the EPA (or to the state for state-run programs) and that EPA has cert
42、ified the supervisor, risk assessor, workers to perform their duties.PART 2 PRODUCTS2.1 MATERIALS AND EQUIPMENTMaterials and equipment needed to complete the project, shall be available and kept on the site. Submit a description of the materials and equipment required; including Material Safety Data
43、 Sheets (MSDSs) for material brought onsite to perform the work.2.1.1 Expendable SuppliesSubmit a description of the expendable supplies required.2.1.1.1 Polyethylene BagsDisposable bags shall be polyethylene plastic and shall be a minimum of 0.15 mm 6 mils thick (0.1 mm 4 mils thick if double bags
44、are used) or any other thick plastic material shown to demonstrate at least equivalent performance; and shall be capable of being made leak-tight. Leak-tight means that solids, liquids or dust cannot escape or spill out.SECTION 02 83 19.00 10 Page 10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.1.2 Polyethylene Leak-tight WrappingWrapping used to wrap lead contaminated debris shall be polyethylene plastic that is a minimum of 0.15 mm 6 mils thick or any ot
