1、ANSI/ASHRAE Addendum ag toANSI/ASHRAE Standard 34-2013Designation andSafety Classification ofRefrigerantsApproved by the ASHRAE Standards Committee on June 25, 2016; by the ASHRAE Technology Council on June 29, 2016;and by the American National Standards Institute on June 3, 2016.This addendum was a
2、pproved by a Standing Standard Project Committee (SSPC) for which the Standards Committee has estab-lished a documented program for regular publication of addenda or revisions, including procedures for timely, documented, con-sensus action on requests for change to any part of the standard. The chan
3、ge submittal form, instructions, and deadlines may beobtained in electronic form from the ASHRAE website (www.ashrae.org) or in paper form from the Senior Manager of Standards. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org) or from ASHRAE Cus-tomer S
4、ervice, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide), or toll free 1-800-527-4723 (for orders in US and Canada). For reprint permission, go towww.ashrae.org/permissions. 2016 ASHRAE ISSN 1041-2336ASHRAE is a register
5、ed trademark of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute.SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus Standard developed under the auspices of
6、ASHRAE. Consensus is definedby the American National Standards Institute (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as“substantial agreement reached by directly and materially affected interest categories. This signifies the concurrence of more than a simple
7、majority,but not necessarily unanimity. Consensus requires that all views and objections be considered, and that an effort be made toward their resolution.”Compliance with this Standard is voluntary until and unless a legal jurisdiction makes compliance mandatory through legislation. ASHRAE obtains
8、consensus through participation of its national and international members, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The ProjectCommittee Chair and Vice-Chair must be members of ASHRAE;
9、 while other committee members may or may not be ASHRAE members, allmust be technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Senior Manager of Standards of ASHRAE should be contacted fora. interpretation
10、 of the contents of this Standard,b. participation in the next review of the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit of th
11、e public in light of available information and acceptedindustry practices. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs Standards or Guidelines or that any tests condu
12、cted under its Standards or Guidelineswill be nonhazardous or free from risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, bysuggesting safe practices in
13、designing and installing equipment, by providing proper definitions of this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformanceto them is completely voluntary.In referri
14、ng to this Standard or Guideline and in marking of equipment and in advertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE.ASHRAE STANDARDS COMMITTEE 20162017Rita M. Harrold, Chair Julie M. Ferguson Cyrus H. NasseriSteven J. Emmerich, Vice-Chair Mi
15、chael W. Gallagher David RobinJames D. Aswegan Walter T. Grondzik Peter SimmondsNiels Bidstrup Vinod P. Gupta Dennis A. StankeDonald M. Brundage Susanna S. Hanson Wayne H. Stoppelmoor, Jr.Waller S. Clements Roger L. Hedrick Jack H. ZarourDrury B. Crawley Rick M. Heiden William F. Walter, BOD ExOJohn
16、 F. Dunlap, Srinivas Katipamula Patricia Graef, COJames W. Earley, Jr. Arsen K. MelikovKeith I. Emerson R. Lee Millies, Jr.Stephanie C. Reiniche, Senior Manager of StandardsASHRAE Standing Standard Project Committee 34Cognizant TC: 3.1, Refrigerants and Secondary CoolantsSPLS Liaison: Mark P. Modera
17、Staff Liaison: Nicole JonesDebra H. Kennoy*, Chair Scott MacLeod* Marc Scancarello*Sean Cunningham*, Vice-Chair Julie Majurin Christopher Seeton*Gary W. Jepson* Sandra R. Murphy Jian Sun-BlanksJay A. Kohler* Jack M. OLeary Ganesan “Sonny” Sundaresan*Tatsuro Kobayashi Chun-Cheng Piao* Kenji Takizawa*
18、William Kopko Robert Richard Samuel F. Yana-Motta*Stephen Kujak* David L. Rule Jing ZhengAndrew Kusmierz George M. Rusch Helen DavisThomas J. Leck John Senediak* Denotes members of voting status at the time of publicationANSI/ASHRAE Addendum ag to ANSI/ASHRAE Standard 34-2013 1(This foreword is not
19、part of this standard. It is merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cessed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus process. Unresolved
20、 objec-tors on informative material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDThis addendum adds the zeotropic refrigerant blend R-456Ato Table 4-2 and Table D-2. Note: In this addendum, changes to the current standardare indicated in the text by underlining (for additions) andst
21、rikethrough (for deletions) unless the instructions specifi-cally mention some other means of indicating the changes. TABLE 4-2 Data and Safety Classifications for RefrigerantBlendsRefrigerant Number = 456A Composition (Mass %) = R-32/134a/1234ze(E) (6.0/45.0/49.0) Composition Tolerances = 1.0/1.0/1
22、.0OEL = 900Safety Group = A1 RCL = 77,000 ppm v/v; 20 lb/Mcf; 320 g/m3Highly Toxic or Toxic Under Code Classification = NeitherTABLE D-2 Data for Refrigerant BlendsRefrigerant Number = 456A Composition (Mass %) = R-32/134a/1234ze(E) (6.0/45.0/49.0) Average Molecular Mass = 101.4 g/molBubble Point (F
23、) = 22.7Dew Point (F) = 14.1Bubble Point (C) = 30.4Dew Point (C) = 25.6Addendum ag to Standard 34-2013Add the following underlined data to Table 4-2 and TableD-2 in the columns indicated. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either
24、 print or digital form is not permitted without ASHRAEs prior written permission. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print or digital form is not permitted without ASHRAEs prior written permission.POLICY STATEMENT DEFINING
25、 ASHRAES CONCERNFOR THE ENVIRONMENTAL IMPACT OF ITS ACTIVITIESASHRAE is concerned with the impact of its members activities on both the indoor and outdoor environment.ASHRAEs members will strive to minimize any possible deleterious effect on the indoor and outdoor environment ofthe systems and compo
26、nents in their responsibility while maximizing the beneficial effects these systems provide,consistent with accepted Standards and the practical state of the art.ASHRAEs short-range goal is to ensure that the systems and components within its scope do not impact theindoor and outdoor environment to
27、a greater extent than specified by the Standards and Guidelines as established byitself and other responsible bodies.As an ongoing goal, ASHRAE will, through its Standards Committee and extensive Technical Committee structure,continue to generate up-to-date Standards and Guidelines where appropriate
28、 and adopt, recommend, and promotethose new and revised Standards developed by other responsible organizations.Through its Handbook, appropriate chapters will contain up-to-date Standards and design considerations as thematerial is systematically revised.ASHRAE will take the lead with respect to dis
29、semination of environmental information of its primary interest andwill seek out and disseminate information from other responsible organizations that is pertinent, as guides to updatingStandards and Guidelines.The effects of the design and selection of equipment and systems will be considered withi
30、n the scope of thesystems intended use and expected misuse. The disposal of hazardous materials, if any, will also be considered.ASHRAEs primary concern for environmental impact will be at the site where equipment within ASHRAEs scopeoperates. However, energy source selection and the possible enviro
31、nmental impact due to the energy source andenergy transportation will be considered where possible. Recommendations concerning energy source selectionshould be made by its members. ASHRAE (www.ashrae.org). For personal use only. Additional reproduction, distribution, or transmission in either print
32、or digital form is not permitted without ASHRAEs prior written permission.ASHRAE 1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org About ASHRAEASHRAE, founded in 1894, is a global society advancing human well-being through sustainable technology for thebuilt environment. The Society and its mem
33、bers focus on building systems, energy efficiency, indoor air quality,refrigeration, and sustainability. Through research, Standards writing, publishing, certification and continuingeducation, ASHRAE shapes tomorrows built environment today. For more information or to become a member of ASHRAE, visi
34、t www.ashrae.org.To stay current with this and other ASHRAE Standards and Guidelines, visit www.ashrae.org/standards.Visit the ASHRAE BookstoreASHRAE offers its Standards and Guidelines in print, as immediately downloadable PDFs, on CD-ROM, and viaASHRAE Digital Collections, which provides online ac
35、cess with automatic updates as well as historical versions ofpublications. Selected Standards and Guidelines are also offered in redline versions that indicate the changes madebetween the active Standard or Guideline and its previous version. For more information, visit the Standards andGuidelines s
36、ection of the ASHRAE Bookstore at www.ashrae.org/bookstore.IMPORTANT NOTICES ABOUT THIS STANDARDTo ensure that you have all of the approved addenda, errata, and interpretations for thisStandard, visit www.ashrae.org/standards to download them free of charge.Addenda, errata, and interpretations for ASHRAE Standards and Guidelines are no longerdistributed with copies of the Standards and Guidelines. ASHRAE provides these addenda,errata, and interpretations only in electronic form to promote more sustainable use ofresources.7/16
