1、ASD STANDARD NORME ASD ASD NORM prEN 2997-013 Edition P 1 December 2006 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION A
2、erospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 013: Oring seal for jam-nut receptacles Product standard Srie arospatiale Connecteurs lectriques circul
3、aires accouplement par bague filete, rsistant au feu ou non, tempratures dutilisation 65 C 175 C continu, 200 C continu, 260 C en pointe Partie 013 : Joint torique pour embase fixation par crou Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbestndig ode
4、r nicht feuerbestndig, Betriebstemperaturen 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze Teil 013: Dichtring fr festen Steckverbinder mit Mutternbefestigung Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Indu
5、stries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be
6、changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardiza
7、tion) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 31
8、December 2006 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2006 by ASD-STAN prEN 2997-013:20062 Contents Page Foreword2 1 Scope 3 2 Normative references 3 3 Terms and definitions .3 4 Required characteristics.3 5 Designation 5 6 Mark
9、ing .5 7 Technical specification .5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval
10、for Publication. prEN 2997-013:2006 3 1 Scope This standard specifies the characteristics of Oring seal for jam-nut receptacles in the family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 2. For the receptacles using these jam-nuts, see EN 2997-
11、004 and EN 2997-006. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 29
12、97-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specification. EN 2997-002, Aerospace series Connectors, electrical, circular,
13、coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 002: Specification of performance and contact arrangements. EN 2997-004, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fir
14、e-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 004: Jam-nut mounted receptacle Product standard. EN 2997-006, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, oper
15、ating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 006: Hermetic jam-nut mounted receptacle Product standard. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 2997-001 apply. 4 Required characteristics 4.1 Dimensions See Fig
16、ure 1 and Table 1. Dimensions and tolerances are in millimetres, they apply after surface treatment. prEN 2997-013:2006 4 Figure 1 Table 1 Mass g Housing size N max. 08 17,02 16,92 0,23 10 20,22 20,12 0,27 12 24,99 24,89 0,32 14 26,57 26,47 0,33 16 29,74 29,64 0,37 18 32,92 32,82 0,41 20 37,64 37,54
17、 0,47 22 40,87 40,77 0,50 24 43,99 43,89 0,56 28 50,39 50,29 0,64 4.2 Material, surface treatment See Table 2. prEN 2997-013:2006 5 4.3 Main general characteristics See EN 2997-002. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, ORING SEAL Identity block EN2997S922 Number of the basic
18、 standard Class (see Table 2) O-ring seal for jam-nut receptacle (see EN 2997-002) Housing size Table 2 Class Model description S O-ring seal for jam-nut receptacle maximum operating temperature 200 C continuous. NOTE S class O-ring are used for both RS, WS, S, Y and YE classes jam-nut receptacles. SE O-ring seal for jam-nut receptacle maximum operating temperature 260 C peak. 6 Marking Not applicable. 7 Technical specification See EN 2997-001.
