1、AECMA STANDARD NORME AECMA AECMA NORM prEN 3372-008 Edition P 1 June 2005 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8110 - Fax. + 32 2 775 8111 - www.aecma-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Aerospa
2、ce series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 008: Free plug with grounding spring Product standard Srie arospatiale Connecteurs lectriques circulaires scoop-proof accouple
3、ment par baonnettes temprature dutilisation 65 C 175 C ou 200 C continu Partie 008: Fiche Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Bajonettkupplung, Betriebstemperatur 65 C bis 175 C oder 200 C konstant Teil 008: Freier Steckverbinder Produktnorm This “Ae
4、rospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain followi
5、ng member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AEC
6、MA-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national stan
7、dard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 June 2005 Comments should be sent within six months after the date of publication to AECMA-STAN Electrical Domain Copyright 2005 by AECMA-STAN prEN 3372-008:20052 Foreword This standard was re
8、viewed by the Domain Technical Coordinator of AECMA-STANs Non-metallic Material Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3 2 Norma
9、tive references 3 3 Terms and definitions .3 4 Required characteristics.4 4.1 Dimensions, mass .4 4.2 Material, surface treatment.5 4.3 Main general characteristics 5 4.4 Possible combinations of plugs and receptacles 5 5 Designation 5 6 Marking .6 7 Technical specification .6 prEN 3372-008:20053 1
10、Scope This standard specifies the characteristics of the free plug connector fitted with a grounding spring in the family of circular electrical connectors coupled by bayonet ring. It applies to class defined in Table 3. For contacts, filler plugs and rear accessories associated with this receptacle
11、, see EN 3372-002. For recep-tacles and protective covers, see EN 3372-003, EN 3372-004, EN 3372-005, EN 3372-009, EN 3372-010 and EN 3372-007 respectively. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only t
12、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts1)EN 3372-001, Aerospace series Connectors, e
13、lectrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 001: Technical specification1)EN 3372-002, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayon
14、et coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements1)EN 3372-003, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 17
15、5 C or 200 C continuous Part 003: Wall-mount receptacle Product standard1)EN 3372-004, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175C or 200C continuous Part 004: Receptacle, hermetic, square
16、flange mounting Product standard1)EN 3372-005, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange, solder mounting Product standar
17、d1)EN 3372-007, Aerospace series Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 007: Protective cover for plug Product standard1)EN 3372-009, Aerospace series Connectors, electrical,
18、circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 009: Receptacle, round flange, jam nut mounting Product standard1)EN 3372-010, Aerospace series Connectors, electrical, circular, medium and high contact densit
19、y, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Product standard1)3 Terms and definitions According to EN 3372-001. 1) Published as AECMA Prestandard at the date of publication of this stand
20、ard prEN 3372-008:20054 Required characteristics 4.1 Dimensions, mass See Figure 1 and Table 1. Dimensions and tolerances in millimetres; they apply after surface treatment Figure 1 Plug Table 1 Dimensions and mass d9 mm d10 mm Mass ga max. Housing size max. max. Pin Socket 08 19,0 15,67 9,0 11,0 10
21、 22,0 18,87 12,0 16,0 12 26,0 22,02 19,0 23,0 14 29,0 25,22 21,0 34,0 16 33,0 28,42 26,0 38,0 18 36,0 31,57 33,0 52,0 20 39,0 34,77 37,0 57,0 22 44,0 37,92 48,0 68,0 24 46,0 41,12 58,0 91,0 aMass with contacts and without accessories4 prEN 3372-008:2005 4.2 Material, surface treatment See Table 2. 4
22、.3 Main general characteristics According to EN 3372-002. 4.4 Possible combinations of plugs and receptacles According to EN 3372-002. 5 Designation EXAMPLE Description block Identity blockELECTRICAL CONNECTOR, RECEPTACLE EN 3372 W 6 18N35 M N Number of basic standard Class (see Table 2) Free plug (
23、see EN 3372-002) Housing size and contact arrangement (see EN 3372-002) Type of contact (see Table 3) Polarisation (see EN 3372-002) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 2 Connector class Class Description W Cadmium-plated alum
24、inium alloy, olive drab 500 h salt mist Plug with grounding spring Crimp, removable contacts Maximum operating temperature 175 C continuous F Nickel-plated aluminium alloy 48 h salt mist Plug with grounding spring Crimp, removable contacts Maximum operating temperature 200 C continuous 5 prEN 3372-0
25、08:20056 Table 3 Types of contacts and delivery Contacts Delivered without contactDelivered with contacts with standard barrelsaMale A M Female B F aSee EN 3155-002. 6 Marking Unless there are other specific contractual requirements, the marking shall include: the identity block as defined in Clause 5; the date of manufacture (year, week); the manufacturers name or trade mark. 7 Technical specification According to EN 3372-001.
