1、ASD STANDARD NORME ASD ASD NORM prEN 3645-005 Edition P1 November 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Ae
2、rospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous Part 005: Receptacle, hermetic, round flange, brasage mounting - Product standard Srie arospatiale Connecteurs lectriques circulaires contacts protgs, accouple
3、ment par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 005 : Embase hermtique collerette ronde fixation par brasage - Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung Dauerbetriebstem
4、peraturen 175 C oder 200 C Teil 005: Hermetischer fester Steckverbinder mit runden Schwei - Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The Aerospace and Defense Industries Association of Europe - Standardization). It is published for the n
5、eeds of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this pre-standard, the technical content shall not be changed to an extent that interchangeability is affected, physically or f
6、unctionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN).
7、The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 November 2005 Comments should be sent within six months after the date of
8、 publication to ASD-STAN Electrical Domain Copyright 2005 by ASD-STAN Page 2 prEN 3645-005:2005Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs G
9、eneral Process Manual, this standard has received approval for Publication. Contents Page 1 Scope.3 2 Normative references3 3 Terminology.4 4 Required characteristics .4 4.1 Dimensions, weights4 4.2 Materials and surface treatment.5 4.3 Recommended panel cut-out.5 4.4 Electrical, mechanical and clim
10、atic characteristics.6 5 Designation.6 6 Marking7 7 Technical specification .7 Page 3 prEN 3645-005:20051 Scope This standard specifies the characteristics of round flange hermetic receptacles, mounted by soldering, in the family of circular electrical connectors with triple start threaded coupling.
11、 It applies to models in table 3. The contacts are unremovable and soldered termination. For plugs and protective covers, see EN 3645-008, EN 3645-011, EN 3645-012 and EN 3645-006 respectively. These connectors are derived from and interchangeable with model Y in specification MIL-DTL-38999/25. 2 No
12、rmative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated and undated references, subsequent amendments to or
13、 revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 3645-001, Aerospace series - Connectors electrical, circular, scoop-proof, triple start
14、threaded coupling, operating temperature 175 C or 200 C continuous - Part 001: Technical specification 1) EN 3645-002, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 002: Specification of perform
15、ance and contact arrangements 1)EN 3645-006, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 006: Protective cover for receptacle - Product standard 1)EN 3645-008, Aerospace series - Connectors el
16、ectrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 008: Non release plug with grounding ring - Product standard 1)EN 3645-011, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operati
17、ng temperature 175 C or 200 C continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard 1)EN 3645-012, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 012: Lan
18、yard release plug with grounding fingers - Type 2 - Product standard 1)MIL-DTL-38999/25, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded and breech coupling), environment resistant, removable crimp and hermetic solder contacts, receptacle, solder mounti
19、ng, hermetic, triple start threaded coupling, hermetic solder contacts, series III, metric 2) 1)Published as AECMA Prestandard at the date of publication of this standard 2)Published by: Department of Defence (DOD), The Pentagon, Washington D.C. 20301 USA Page 4 prEN 3645-005:20053 Terminology See E
20、N 3645-001. 4 Required characteristics 4.1 Dimensions, weights Dimensions and tolerances are in millimetres. Key 1 Red strip 2 Male contact Female contact Figure 1 Round flange receptacle Page 5 prEN 3645-005:2005 Table 1 - Round flange receptacle - Dimensions F N S Z Shell sizemax. max. max. max. S
21、tainless steel mass g max. 09 17,10 19,40 15 11 19,90 21,80 20 13 23,10 5,1024,90 23,8025 15 26,20 28,10 31 17 29,40 31,30 38 19 31,80 33,60 44 21 35,00 36,80 51 23 38,20 3,91 40,00 24,60 60 25 41,30 43,20 71 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out Dimensions a
22、nd tolerances are in millimetres. Figure 2 Panel cut-out Page 6 prEN 3645-005:2005Table 2 - Panel cut-out - Dimensions Shell size A 025,0+09 17,20 11 20,00 13 23,20 15 26,30 17 29,50 19 31,90 21 35,10 23 38,30 25 41,40 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. 5 Design
23、ation EXAMPLE: Description block ELECTRICAL CONNECTOR Identity block EN3645-Y1GN35MA Number of the basic standard Model according to Table 3 Shell code for hermetic, round flange receptacle, attached by soldering Shell size code according to Table 4 N: No earthed contacts Contact arrangement accordi
24、ng to EN 3645-002 except those containing coaxial or triaxial contacts or size 10 contacts M: male with solder cup X: male with eyelet Polarisation: N, A, B, C, D, E NOTE: If necessary, the code I9005 shall be placed between the classification block and the identity block. Page 7 prEN 3645-005:2005
25、Table 3 - Model coding Model Description Y Sealed receptacles, with shell in stainless steel - Soldered contacts - operations Maximum operating temperature 200 C continuous Table 4 - Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.
