1、ASD STANDARD NORME ASD ASD NORM prEN 3645-010 Edition P1 November 2005 PUBLISHED BY THE AEROSPACE AND DEFENSE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Gulledelle 94 - B-1200 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 763 3565 - www.asd-stan.orgICS: 49.060 Descriptors: ENGLISH VERSION Ae
2、rospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Product standard Srie arospatiale Connecteurs lectriques circulaires contacts protgs, accoupleme
3、nt par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 010 : Embase collerette ronde, hermtique fixation par crou Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung Dauerbetriebstemperatu
4、ren 175 C oder 200 C Teil 010: Hermetischer Fester Steckverbinder mit runden Schwei und Mutternbefestigung Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The Aerospace and Defense Industries Association of Europe - Standardization). It is publ
5、ished for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this pre-standard, the technical content shall not be changed to an extent that interchangeability is affected,
6、physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European
7、Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 30 November 2005 Comments should be sent within six months af
8、ter the date of publication to ASD-STAN Electrical Domain Copyright 2005 by ASD-STAN Page 2 prEN 3645-010:2005 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN define
9、d in ASD-STANs General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope. 3 2 Normative references 3 3 Terminology. 4 4 Required characteristics4 4.1 Dimensions, weights . 4 4.2 Materials and surface treatment 7 4.3 Recommended panel cut-out 7 4.4 Electrical,
10、 mechanical and climatic characteristics.7 5 Designation 8 6 Marking. 9 7 Technical specification. 9 Page 3 prEN 3645-010:2005 1 Scope This standard specifies the characteristics of hermetic receptacles with jam nut mounting in the family of circular, electrical connectors, with triple start threade
11、d coupling. It applies to models in table 3. For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively. The contacts are unremovable and soldered termination. These connectors are derived from and interchangeable with Model Y in specification MIL-DTL-389
12、99/23. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated and undated references, subsequent amend
13、ments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 3645-001, Aerospace series Connectors electrical, circular, scoop-proof, trip
14、le start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification 1) EN 3645-002, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of perf
15、ormance and contact arrangements 1)EN 3645-006, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 006: Protective cover for receptacle - Product standard 1)EN 3645-008, Aerospace series - Connectors
16、 electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 008: Non release plug with grounding ring - Product standard 1)EN 3645-011, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, oper
17、ating temperature 175 C or 200 C continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard 1)EN 3645-012, Aerospace series - Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous - Part 012:
18、Lanyard release plug with grounding fingers - Type 2 - Product standard 1)MIL-DTL-38999/23, Connectors, electrical, circular, miniature, high density, quick disconnect (bayonet, threaded and breech coupling), environment resistant, removable crimp and hermetic solder contacts, receptacle, jam-nut mo
19、unting, hermetic, triple start threaded coupling, hermetic solder contacts, series III, metric 2) 1)Published as AECMA Prestandard at the date of publication of this standard 2)Published by: Department of Defence (DOD), The Pentagon, Washington D.C. 20301 USA Page 4 prEN 3645-010:20053 Terminology S
20、ee EN 3645-001. 4 Required characteristics 4.1 Dimensions, weights Dimensions and tolerances are in millimetres. Page 5 prEN 3645-010:2005 (without seal) Seal (Slot with close edges) Key 1 Red strip 2 3 holes 1,5 min. for brake wire (see option according to Detail D) 3 H on flats 4 B on flat 5 Seal
21、Figure 1 Hermetic jam nut receptacle Note: One disengagement is permissible to accept the accessory mounting. Page 6 prEN 3645-010:2005 Table 1 Hermetic jam nut receptacle - Dimensions A B C 1)D E F2)G H K max. Shell size 0,3 15,010,0+20,010,0+03,013,0+ 0,13 max. Thread Male contact Female contact 0
22、9 30,2 16,53 17,40 15,9 M17x1 6g 0,1 R 24,00 21,82 5,3 5,9 11 34,9 19,07 20,60 18,8 M20x1 6g 0,1 R 27,00 24,99 13 38,1 23,82 25,40 2,39 1,14 23,8 M25x1 6g 0,1 R 32,00 29,77 15 41,3 26,97 28,50 26,8 M28x1 6g 0,1 R 36,00 32,91 17 44,5 30,15 31,85 30,8 M32x1 6g 0,1 R 3)37,00 36,12 5,1 5,7 19 49,2 33,32
23、 34,90 33,8 M35x1 6g 0,1 R 41,00 39,25 21 52,4 36,50 37,903,58 1,91 36,8 M38x1 6g 0,1 R 46,00 42,47 23 55,6 39,67 41,20 39,8 M41x1 6g 0,1 R 50,00 45,61 25 58,7 42,85 44,40 42,8 M44x1 6g 0,1 R 51,23 49,25 L M N P S W X Y Z Mass (g) 03,0+ 0,13 1,04,0+ 0,4 1,07,0+max. Stainless steel 9,10 16,3 15,30 14
24、,1 27,0 29,2 20,50 20,19 34 9,10 19,4 16,40 31,8 25,27 24,97 41 9,10 22,7 21,60 34,9 2,2 28,45 28,14 1,85 1,70 50 9,10 25,9 24,80 38,1 29,3 31,62 31,32 62 9,10 29,0 28,00 41,3 34,80 34,49 83 9,70 32,2 31,20 14,3 46,0 37,92 37,62 108 9,70 35,4 34,30 49,2 3,0 30,1 41,20 40,69 2,69 2,54 141 9,70 38,6 3
25、7,50 52,4 44,37 43,86 172 9,70 41,7 40,70 55,6 47,55 47,04 203 1) Dimensions C and 1,5 mm shall be compatible with the panel hole 2) Diameter F corresponds to the start of the thread 3) Upper diameter modified as follow: 31,95 max. 31,80 min. Page 7 prEN 3645-010:2005 4.2 Materials and surface treat
26、ment See Table 3. 4.3 Recommended panel cut-out Dimensions and tolerances are in millimetres. Figure 2 Panel cut-out Table 2 - Panel cut-out - Dimensions Shell size A 025,0+B 25,00C min 09 17,70 16,99 31,80 11 20,88 19,53 35,00 13 25,58 24,26 39,40 15 28,80 27,53 42,50 17 31,98 30,68 45,70 19 35,15
27、33,86 48,50 21 38,28 37,06 51,70 23 41,50 40,24 54,90 25 44,68 43,41 58,00 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. Page 8 prEN 3645-010:20055 Designation EXAMPLE: Description block JAM NUT ELECTRICAL CONNECTOR Identity block EN3645-Y7GN35MA Number of the basic standa
28、rd Model according to Table 3 Shell code for nut mounting receptacle Shell size code according to Table 4 only N: no grounded cavity Contact arrangement according to EN 3645-002 except those containing coaxial or triaxial contacts or size 10 contacts Contact code M: male with solder cup X: male with
29、 eyelet Polarisation: N, A, B, C, D, E NOTE: If necessary, the code I9005 shall be placed between the classification block and the identity block. Table 3 - Model coding Model Description Y Hermetic receptacles, with shell in stainless steel - Soldered contacts Maximum operating temperature 200 C continuous Table 4 - Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J Page 9 prEN 3645-010:20056 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.
