1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-008 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector
2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 008: Rack and panel plug for 2 and 4 modules, series 2 Product standard Srie arospatiale Luft- und Raumfahrt modulaires in modularer Bauweise Connecteurs lectriques rectangulaires Elektrischer Rechtecksteckverbinder Tem
3、prature dutilisation 175 OC continu Betriebstemperatur 175 OC konstant Partie 008 : Fiches de rack 2 et 4 modules, Teil 008: Freier Einschub- und Gehusesteckverbinder srie 2 mit 2 und 4 Modulen, Serie 2 Norme de produit Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the resp
4、onsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publica
5、tion of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft Europ
6、ean Standard to CEN (European Committee for Standardization) for formal vote. Page 2 prEN 4165-008: 2003 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined
7、in AECMA- STANS General Process Manual, this standard has received approval for Publication. Contents Page 1 Scope 3 2 Normative references . 3 3 Terminology 3 4 Required characteristics 3 5 Rack plug . 4 6 Designation . 6 7 Marking . 6 8 Technical specification 6 Page 3 prEN 4165-008: 2003 1 Scope
8、This standard defines the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 41 65-002. The protective covers corresponding to those plugs are defined in EN 41 65-01 9. 2 Normative
9、references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of
10、 these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 41 65-001, EN 41 65-002, EN 41 65-003, Aerospace series - Marking of aerospace products Aerospace ser
11、ies - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specification - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 002: Specification of performance a
12、nd contact arrangements 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 003: Modules series 2 and series 3 - Product standard 1 ) EN 41 65-01 9, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
13、 175 “C continuous - Part 019: Protective cover for plug, for 2 or 4 modules, series 2 and series 3 - Product standard 2) EN 41 65-021, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 021: Coupling system keyway for plug - Product stan
14、dard 1 ) 3 Term in ol ogy See EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at the date of publication of this standard 2) In preparation at the date of publication of this standard Page 4 prEN 4165-008: 2003 5 Rack plug 5.1 See Figure 1. For 2
15、 modules classes W, F, and A Figure 1 Page 5 prEN 4165-008: 2003 W 5.2 See Fiaure 2. For 4 modules classes W, F and A Rack and panel plug with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 “C contin
16、uous Figure 2 Table 1 - Rack and panel plug class A I I Class I Description Rack and panel plug with housing (shell) black anodised plated, aluminium alloy, no conducting finish, 48 hours resistance to salt mist, maximum operating temperature 175 “C continuous I Rack and panel plug with housing (she
17、ll) black nickel plated, aluminium alloy, 96 hours IFI resistance to salt mist, maximum operating temperature 175 “C continuous Page 6 prEN 4165-008: 2003 Type 9: Rack and panel plug (see EN 4165-002) A = series 2 6 Designation EXAMPLE: Shell type 4 = plug 4 modules 2 = plug 2 modules State of delivery plug keying coupling (see EN 4165-021) Position of keying coupling O - Not fitted Fitted in the plug 4 5 6 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 See EN 4165-001. Tech n i cal specification
