1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-021 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector
2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 021 : Coupling system keyway for plug Product standard Srie arospatiale Connecteurs lectriques rectangulaires modulaires Temprature dutilisation 175 OC continu Partie 021 : Systme de dtrompage pour fiches Norme de produ
3、it Luft- und Raumfahrt Elektrischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 175 OC konstant Teil 021 : Kodierungssystem fr freie Steckeverbinder Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association
4、of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content sha
5、ll not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft European Standard to CEN (European Committee for Standar
6、dization) for formal vote. Page 2 prEN 4165-021 : 2003 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS General Process Manual, this stand
7、ard has received approval for Publication. Contents Page 1 Scope 3 2 Normative references . 3 3 Terminology 3 4 Required characteristics 4 5 Designation . 5 6 Technical specification 5 Page 3 prEN 4165-021: 2003 1 Scope This standard defines the coupling system keyway for plug used in the family of
8、rectangular electrical connectors. The connector plugs corresponding to those coupling system keyways are defined in EN 4165-006, EN 4165-007, EN 4165-008, EN 4165-009 and EN 4165-010. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publ
9、ications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revisi
10、on. For undated references the latest edition of the publication referred to apply. EN 4165-001, EN 4165-006, EN 4165-007, EN 4165-008, EN 4165-009, EN 4165-010, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specificat
11、ion - Product standard 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C cont
12、inuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard 1) Aerospace series - Connectors, ele
13、ctrical, rectangular, modular - Operating temperature 175 “C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C continuous - Part 010: Rack and panel rear mounte
14、d plug for 2 and 4 modules, series 2 - Product standard 1 ) 3 Term in ol ogy See EN 4165-001. 1) Published as AECMA standard at the date of publication of this standard Page 4 prEN 4165-021 : 2003 4 Required characteristics Dimensions are in millimetres. See Figure 1 and Figure 2. Key 1 optional des
15、ign Figure 1 Page 5 prEN 4165-021: 2003 Description block COUPLING SYSTEM KEYWAY FOR PLUG Standard key Identity block EN41 65P01 1101 Purple key Yellow key 1011 1021 Green key 1031 Blue key 1041 Orange key 1051 NOTE Colored paint is visible only on the top face. Figure 2 5 Designation EXAMPLE: White key 1061 6 Technical specification See EN 4165-001.
