1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM ASD-STAN prEN 4529-002 Edition P 2 July 2017 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes edition P
2、 1 of July 2001 and will supersede EN 4529-002:2006 Descriptors: ENGLISH VERSION Aerospace series Elements of electrical and optical connection Sealing plugs Part 002: Index of product standards Luft- und Raumfahrt Elektrische und optische Verbindungselemente Verschlu-Stopfen Teil 002: bersicht ber
3、die Einzelnormen Srie arospatiale Organes de connexion lectrique et optique Obturateur dtanchit Partie 002 : Liste des normes de produit This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardiz
4、ation). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeabil
5、ity is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, the ASD-STAN prEN will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and
6、transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. ASD-STAN Technical Committee approves that: “This document is
7、published by ASD-STAN for the needs of the European Aerospace Industry. The use of this standard is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” ASD-STAN reviews each st
8、andard and technical report at least every five years at which time it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments or any suggestions that may arise. All rights reserved. No parts of this publication may be reproduced, stored in a retrieval
9、 system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ Edition approved for publication 1st July 2017 Comments shou
10、ld be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2017 ASD-STAN prEN 4529-002:2017 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 4 Index of product standards and associated connectors . 4 Foreword This standard was reviewed by the
11、Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4529-002:2017 (E) 3 1 Scope This standard lists the produ
12、ct standards for sealing plugs for elements of electrical and optical connection covered by technical specification EN 4529-001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refer
13、ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C
14、 to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specification EN 3218-001, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 001: Technical specification EN 3372-001, Aerospace series Connectors, electrical, circular, medium and high contact
15、 density, scoop-proof with bayonet coupling, operating temperatures 65 C to 175 C or 200 C continuous Part 001: Technical specification EN 3545-001, Aerospace series Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures 55 C to
16、175 C Part 001: Technical specification EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatures 175 C or 200 C continuous Part 001: Technical specification EN 3646-001, Aerospace series Connectors, electrical, circular, bayo
17、net coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 3682-001, Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 001: Technical specification
18、 EN 3708-001, Aerospace series Modular interconnection systems Terminal junction systems Part 001: Technical specification EN 4529-001, Aerospace series Elements of electrical and optical connection Sealing plugs Part 001: Technical specification EN 4529-003, Aerospace series Elements of electrical
19、and optical connection Sealing plugs Part 003: Class T Product standard prEN 4529-002:2017 (E) 4 4 Index of product standards and associated connectors Table 1 lists the sealing plugs to be used in different connector types. Table 1 Product standard EN 4529- Temperature C Model code Elements of connection insert style Elements of connection 003 260 (Class T) N (Normal) Pin insert and socket insert EN 2997-001 EN 3218-001 EN 3372-001 EN 3545-001 EN 3645-001 EN 3646-001 EN 3682-001 EN 3708-001
