1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM ASD-STAN prEN 4611-002 Edition P 2 June 2017 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: 49.060 Supersedes ed
2、ition P 1 of July 2004 and will supersede EN 4611-002:2012 Descriptors: ENGLISH VERSION Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 002: General Luft- und Raumfahrt Ein- und mehradrige elektrische Leitungen zur allgemeines Verwendung XLE
3、TFE Familie Teil 002: Allgemeines Srie arospatiale Cbles, lectriques, dusage gnral, mono et multiconducteurs Famille XLETFE Partie 002 : Gnralits This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - S
4、tandardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interc
5、hangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, the ASD-STAN prEN will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal
6、vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. ASD-STAN Technical Committee approves that: “This doc
7、ument is published by ASD-STAN for the needs of the European Aerospace Industry. The use of this standard is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” ASD-STAN review
8、s each standard and technical report at least every five years at which time it may be revised, reaffirmed, stabilized or cancelled. ASD-STAN invites you to send your written comments or any suggestions that may arise. All rights reserved. No parts of this publication may be reproduced, stored in a
9、retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of ASD-STAN. Order details: E-mail: salesasd-stan.org Web address: http:/www.asd-stan.org/ Edition approved for publication 1st June 2017 Comm
10、ents should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2017 ASD-STAN prEN 4611-002:2017 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms, definitions, symbols and abbreviations . 3 4 List of product standards . 4 5 Materia
11、ls and construction . 4 6 Identification and marking 5 7 Technical specification . 5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Pro
12、cess Manual, this standard has received approval for Publication. prEN 4611-002:2017 (E) 3 1 Scope This Standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft operating at temperatures between 65 C to 13
13、5 C and 150 C, dependent upon conductor type. The voltage rating is 600 V rms at sea level. This insulation system has been used in aerospace applications using 115 V ac (phase-to-neutral) 400 Hz and 28 V dc. Verification of the suitability of cables for use in other electrical systems is the respon
14、sibility of the user. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced documen
15、t (including any amendments) applies. EN 2084, Aerospace series Cables, electrical, general purpose, with conductors in copper or copper alloy Technical specification EN 3475-100, Aerospace series Cables, electrical, aircraft use Test methods Part 100: General EN 3838, Aerospace series Requirements
16、and tests on user-applied markings on aircraft electrical cables ISO 2635, Aircraft Conductors for general purpose aircraft electrical cables and aerospace applications Dimensions and characteristics TR 6058, Aerospace series Cable code identification list 1) 3 Terms, definitions, symbols and abbrev
17、iations For the purposes of this document, the following terms definitions, symbols and abbreviations given in EN 3475-100 apply. 1) Published as ASD-STAN Technical Report at the date of publication of this standard by AeroSpace and Defence industries Association of Europe - Standardization (ASD-STA
18、N) (www.asd-stan.org) prEN 4611-002:2017 (E) 4 4 List of product standards EN 4611-003, Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 003: Tin plated copper Operating temperatures, between 65 C and 135 C Single extruded wall for enclosed a
19、pplications UV laser printable Product standard EN 4611-004, Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 004: Tin plated copper Operating temperatures, between 65 C and 135 C Dual extruded wall for open applications UV laser printable Pr
20、oduct standard EN 4611-005, Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 005: Silver plated copper Operating temperatures, between 65 C and 150 C Single extruded wall for enclosed applications UV laser printable Product standard EN 4611-0
21、06, Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 006: Silver plated copper Operating temperatures, between 65 C and 150 C Dual extruded wall for open applications UV laser printable Product standard EN 4611-007, Aerospace series Cables, e
22、lectrical, for general purpose, single and multicore assembly XLETFE Family Part 007: Nickel plated copper Operating temperatures, between 65 C and 150 C Dual extruded wall for open applications UV laser printable Product standard EN 4611-008, Aerospace series Cables, electrical, for general purpose
23、, single and multicore assembly XLETFE Family Part 008: BP Nickel plated copper Operating temperatures, between 65 C and 150 C Dual extruded wall for open applications, with additional protection in areas of high vibration, cable flexing and fluid contamination UV laser printable Product standard EN
24、 4611-009, Aerospace series Cables, electrical, for general purpose, single and multicore assembly XLETFE Family Part 009: BJ Nickel plated copper Operating temperatures, between 65 C and 150 C Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing
25、and fluid contamination UV laser printable Product standard 5 Materials and construction 5.1 Materials The cable conductors shall be made of copper or copper alloy and nickel or silver or tin-plated conforming to ISO 2635 Table 2 or as specified in product standards. 5.2 Construction 5.2.1 General S
26、ee individual product standards. 5.2.2 Cores Number of cores, see Table 1. Table 1 Number of cores 1 2 3 4 5 6 7 8 9 10 Specified code A B C D E F G H J K prEN 4611-002:2017 (E) 5 6 Identification and marking The identification and marking of cables by the manufacturer shall be in accordance with EN
27、 2084. As the designation, required for orders, is generally too long, for use in electrical drawings a shorter designation (without colour information) is given in TR 6058. EXAMPLE Designation: EN 4611-004A006P Cross reference: XLETFE 20 EN zz C 006 ? & Reference to EN standard cable 4 spaces manda
28、tory Type code Specific code Size code Manufacturer country code Manufacturer code Year of manufacturering For multicore cable with jacket, the marking shall be optional on core(s) and mandatory on jacket. For multicore cable without jacket, each core shall be marked with his own designation. The cables (single core or jacketed cable) shall be capable of being printed with user-applied UV laser markings according to EN 3838. Aggressive marking techniques are not permitted. 7 Technical specification See EN 2084. EN zz C 20 ? & (300 50) 60 mm EN zz C 20 ? &
