1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4644-012 Edition P 1 July 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-stan.orgICS: 49.060; 49.090 Descriptors
2、: ENGLISH VERSION Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 012: Receptacle, size 1, class A, C and E Product standard Srie arospatiale Connecteur, lectrique et optique, rectangulaire, modulai
3、re, inserts rectangulaires, temprature de fonctionnement 175 C (ou 125 C) continu Partie 012 : Embase, taille 1, classes A, C et E Norme de produit Luft- und Raumfahrt Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebstemperatur 175 C (oder 125 C) kon
4、stant Teil 012: Fester Steckverbinder, Gre 1, Klassen A, C und E Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerosp
5、ace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-iden
6、tification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members hav
7、e then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1stJuly 2014 Comments should be sent within six months after the date of publication to ASD-STAN Electri
8、cal Domain Copyright 2014 by ASD-STAN prEN 4644-012:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 4 5 Designation 7 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain
9、. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4644-012:2014 (E) 3 1 Scope This standard specifies the size 1 receptacle for disconnect applications used in the fa
10、mily of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-011 and EN 4644-013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispe
11、nsable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4644-001, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts opera
12、ting temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 002: Specification of performance and contact arrangements
13、EN 4644-011, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 011: Plug, size 1, class A, C and E Product standard 1)EN 4644-013, Aerospace series Connector, electrical and optical, rectangular, modul
14、ar, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 013: Plug, size 1, with ground block, class B and F Product standard 1)3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 4644-001 apply. 1) Published as ASD-STAN Prestandard
15、at the date of publication of this standard. http:/www.asd-stan.org/ prEN 4644-012:2014 (E) 4 4 Required characteristics 4.1 Dimensions and recommended panel cut-out See Figure 1 to Figure 3. Key 1 Polarization device (see EN 4644-001) 2 Two self-locking 4-40 UNC threads for accessories 3 23,95 axis
16、 4 Two self-locking 6-32 UNC threads NOTE Ar, Br, Cr axis, see EN 4644-001. Figure 1 prEN 4644-012:2014 (E) 5 NOTE Ar axis, see EN 4644-001. Figure 2 prEN 4644-012:2014 (E) 6 Key 1 2 places 2 4 places Figure 3 Panel cut-out 4.2 Mass 50 g max. prEN 4644-012:2014 (E) 7 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR, SIZE 1 RECEPTACLE Identity block EN 4644-012AMX Number of this standard Shell class (see EN 4644-002) Housing type: (see Figures 1 and 2) M: with two self-locking 6-32 UNC threads Polarization code (see EN 4644-002)
