1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4692 Edition P 2 April 2015 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Supersedes edition P 1 of Octobe
2、r 2012 Descriptors: ENGLISH VERSION Aerospace series Tie rod with integrated bolts Locking clip Srie arospatiale Bielle avec axes intgrs Clip de verrouillage Luft- und Raumfahrt Zug-Druck Stange mit integrierten Bolzen Verriegelungsklipp This “Aerospace Series“ Prestandard has been drawn up under th
3、e responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publicat
4、ion of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft Europea
5、n Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards c
6、onflicting with the EN. Edition approved for publication 1st April 2015 Comments should be sent within six months after the date of publication to ASD-STAN Mechanical Domain Copyright 2015 by ASD-STAN prEN 4692:2015 (E) 2 Contents Page Foreword 2 Introduction .3 1 Scope 4 2 Normative references 4 3
7、Requirements .4 4 Materials .5 5 Locking clips 5 6 Marking 10 7 Designation . 11 8 Technical specification 11 Annex A (informative) Standard evolution form . 12 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Mechanical Domain. After inquiries and votes carried o
8、ut in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4692:2015 (E) 3 Introduction Aerospace and Defence Standardization (ASD-STAN) draws attention to the fact that it is claimed that compliance with this do
9、cument may involve the use of a patent: USA: US 8371767, China: CN 10104431, Japan: JP 4885140, Russia: RU 2389914, South Africa: ZA 2007/03913, Canada: 2584387, South Korea: 7011559. ASD-STAN takes no position concerning the evidence, validity and scope of this patent right. The holder of this pate
10、nt right has assured ASD-STAN that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ASD-STAN. Information may be obtained fro
11、m: GMT Gummi-Metall-Technik GmbH Liechtersmatten 5 D-77815 Bhl TRIGUM Engineering GmbH Brunskamp 4 D-21220 Seevetal/Maschen Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ASD-STAN shall not be he
12、ld responsible for identifying any or all such patent rights. prEN 4692:2015 (E) 4 1 Scope This standard shows the locking clips for the construction kit of rod assemblies for aerospace applications with two adjustable ends with integrated bolts for interior and sub structure in the temperature rang
13、e 55 C to 85 C (EN 4691-2). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced d
14、ocument (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4528, Aerospace series Steel FE-PA3903 (X10CrNi18-8) Cold rolled Strip for springs a 3 mm 1 250 MPa Rm 1 640 MPa EN 4691-1, Aerospace series Tie rod with integrated bolts Part 1: Technical specific
15、ation 1) EN 4691-2, Aerospace series Tie rod with integrated bolts Part 2: Overview construction kit 1) ISO 2768-1, General tolerances Part 1: Tolerances for linear and angular dimensions without individual tolerance indications ISO 2768-2, General tolerances Part 2: Geometrical tolerances for featu
16、res without individual tolerance indications ISO 8075, Aerospace Surface treatment of hardenable stainless steel parts DIN 65038-2, Aerospace Bars of steel, nickel alloys and cobalt alloys for aircraft Technical specification, sampling WL 1.4548 (all parts), Aerospace Precipitation-hardening stainle
17、ss chromium-nickel-copper steel with approx. 0,05C-16Cr-4Cu-4Ni 3 Requirements 3.1 Configuration, dimensions, tolerances and masses 3.1.1 Configuration The configuration shall be in accordance with Figure 1, Figure 2, Figure 3, Figure 4 and Figure 5. 3.1.2 Dimensions, tolerances and masses Dimension
18、s are in millimetres, tolerances and masses in accordance to Table 2. General tolerances shall be in accordance to ISO 2768-mK. 1) Published as ASD-STAN Prestandard at the date of publication of this standard. http:/www.asd-stan.org/ prEN 4692:2015 (E) 5 4 Materials See Table 1. Table 1 Material Pos
19、ition Description Material Surface treatment 1 Clip Stainless steel strip 1.4310 according to EN 4528 Passivated according to ISO 8075 2 Pin Stainless steel WL 1.4548.4 according to DIN 65038-2 5 Locking clips See Figure 1 to Figure 5. Key 1 Clip 2 Pin a Marking for zero Position b Marking, see Clau
20、se 6 c Pin riveted Figure 1 Locking clip (locking clip code 01 and 02) prEN 4692:2015 (E) 6 Key 1 Clip 2 Pin a Marking for zero Position b Marking, see Clause 6 c Pin riveted Figure 2 Locking clip (locking clip code 03R) 1 2 prEN 4692:2015 (E) 7 Key 1 Clip 2 Pin a Marking for zero Position b Marking
21、, see Clause 6 c Pin riveted Figure 3 Locking clip (locking clip code 03L) prEN 4692:2015 (E) 8 Key 1 Clip 2 Pin a Marking for zero Position b Marking, see Clause 6 c Pin riveted Figure 4 Locking clip (locking clip code 04R, 05R, 06R, 07R and 08R) prEN 4692:2015 (E) 9 Key 1 Clip 2 Pin a Marking for
22、zero Position b Marking, see Clause 6 c Pin riveted Figure 5 Locking clip (locking clip code 04L, 05L, 06L, 07L and 08L) prEN 4692:2015 (E) 10 Table 2 Dimensions and mass for locking clip and mirrored locking clip Size code b1 B2 B3 D1 D2 D4 d5 D6 F1 H1 H2 H3 H4 0,2 Tol. 0,5 0 max. 01 / 19,1 12 3,3
23、26,8 5,000 0 0,030 4,3 23,5 7,0 0,3 27,3 1,5 8,2 1,8 02 / 13,8 03R (03L) 7,938 0,038 0,076 5,5 10,0 0,5 0,5 35,2 04R (04L) 6,350 0,3 1,5 27,0 05R (05L) 7,938 06R (06L) 9,525 12,0 07R (07L) 6,350 08R (08L) 7,938 10,0 Size code L1 L2 L3 L4 L5 R1 r2 R3 T1 1 2 Mass g/pieces 0,5 0 10 3 % 01 / 43,0 22 5,3
24、 49,0 8 2 1,5 0,5 0,8 110 60 17,5 02 / 31,0 37,0 13,7 03R (03L) 71,4 77,4 28,0 04R (04L) 58,0 64,0 21,0 05R (05L) 24,0 06R (06L) 63,0 69,0 29,0 07R (07L) 21,5 08R (08L) 25,0 6 Marking According to EN 2424, style A. prEN 4692:2015 (E) 11 7 Designation EXAMPLE Description block LOCKING CLIP Identity b
25、lock EN4692-03R Number of this standard Size code 8 Technical specification According to EN 4691-1. prEN 4692:2015 (E) 12 Annex A (informative) Standard evolution form Standard reference: prEN 4692 Date: 2014-01-21 MODIFICATION REASON AND VALIDATION EP Patent removed page 4 “Introduction” EP Patent
26、was withdrawn by EP patent office New Patents added page 4 “Introduction” New Patents became issued USA: US 8371767 China: CN 10104431 Japan: JP 4885140 Russia: RU 2389914 South Africa: ZA 2007/03913 Canada: 2584387 South Korea: 7011559 Dimension D1, D6 and H3 changed in Table 2. Dimensions were wrong Dimension H1 added in Figure 2, 3, 4 and 5. Dimension was missing Figure title corrected in Figure 1 to 5. Figure title is now in line with Table 2
