1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4830-004 Edition P 1 March 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONRue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: Descriptors: ENGLISH VERSION A
2、erospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X contacts Part 004: Extraction tool Product standard Srie arospatiale Connecteurs optiques rectangulaires, modulaires, temprature dutilisation 125 C, pour contacts EN 4639-10X Partie 004 : Outil de
3、xtraction Norme de produit Luft- und Raumfahrt Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 C, fr EN 4639-10X Kontakte Teil 004: Modul-Ausbauwerkzeug Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence
4、 Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall no
5、t be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standa
6、rdization) for formal vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publicatio
7、n 1stMarch 2014 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4830-004:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 4 5 Extractio
8、n tool modules 4 6 Designation 5 7 Technical specification . 5 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this stan
9、dard has received approval for Publication. prEN 4830-004:2014 (E) 3 1 Scope This standard defines the material used in the manufacturing of EN 4830 optical modules. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable
10、 for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4830-001, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4639-10X
11、contacts Part 001: Technical specification 1)TR 4684, Aerospace series Electrical and Optical technology and component definitions 2)3 Terms and definitions For the purposes of this document, the terms and definitions given in TR 4684 apply. 1) Published as ASD-STAN Prestandard at the date of public
12、ation of this standard. http:/www.asd-stan.org/ 2) In preparation at the date of publication of this standard prEN 4830-004:2014 (E) 4 4 Required characteristics See Figure 1. 5 Extraction tool modules Dimensions are in millimetres. Figure 1 prEN 4830-004:2014 (E) 5 6 Designation EXAMPLE Description block EXTRACTION TOOL Identification block EN4830 T Number of the basic standard T: tool 7 Technical specification See EN 4830-001.
