1、ASD-STAN Technical Report Rapport Technique ASD-STAN ASD-STAN Fachbericht TR 4654-002 Edition 1 September 2010 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONAvenue de Tervuren, 270 - B-1150 Brussels - Tel. + 32 2 775 8126 - Fax. + 32 2 775 8131 - www.asd-st
2、an.orgICS: Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, EN 4644 specific products Part 002: Specification of performance and list of technical reports Srie arospatiale Connecteurs lectriques, EN 4644 produits spcifiques Partie 002 : Spcification des performances et liste des
3、 rapports techniques Luft- und Raumfahrt Elektrische, Rundsteckverbinder, EN 4644 spezielle Bauteile Teil 002: Leistungsdaten und Auflistung der technischen Fachberichte This Technical Report was drawn up by the Electrical Domain of ASD-STAN. The reason which led to the publication of the document a
4、s a Technical Report is explained in the foreword. Edition approved for publication 1 September 2010 Electrical Domain Copyright 2010 by ASD-STAN Page 2 TR 4654-002:08-2010 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Description of models .4 5 Description
5、and codification of shell classes.4 6 Operating conditions.4 7 Operating characteristics .4 8 Technical Report5 9 Polarization.5 10 Module contacts arrangements5 11 Rear accessories .5 Page 3 TR 4654-002:08-2010 Foreword The main task of ASD-STAN Technical Committees is to prepare EN Standards, in e
6、xceptional circumstances however, the publication of Technical Report of one of the following types may be proposed: Type 1, the subject is still under technical development requiring wider exposure; Type 2, a Technical Committee has collected data of a different kind from that which is normally pub
7、lished as a European Standard. The Electrical Domain decided to publish this document in the form of a Technical Report of type 2 in order to facilitate the updating of this document. Page 4 TR 4654-002:08-2010 1 Scope This Technical Report specifies the common conditions for particular products der
8、ived from EN 4644 standard series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)
9、applies. EN 4644 (all parts), Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous 1)TR 4654 (all parts), Aerospace series Connectors, electrical, EN 4644 specific products 2)3 Terms and definitions For the p
10、urposes of this document, the terms and definitions given in EN 4644-001 apply. LRM: Line Replaceable Module 4 Description of models Modular electrical rectangular, rack and panel connectors, with PC tail contact on equipment side. 5 Description and codification of shell classes See codification of
11、shell classes in each Technical Report. 6 Operating conditions See EN 4644-002. 7 Operating characteristics See EN 4644-002. 1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd
12、-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). Page 5 TR 4654-002:08-2010 8 Technical Report See Table 1. Table 1 Technical Report Description
13、TR 4654-001 Technical specification TR 4654-002 Specification of performances and list of technical report TR 4654-003 Rectangular inserts with PC tails contacts TR 4654-010 Plug and receptacle shell 1Q18 TR 4654-200 Male size 8 quadrax contacts with Right angle PC tails TR 4654-300 Backshells 9 Polarization See EN 4644-002 or each Technical Report for specific design. 10 Module contacts arrangements See EN 4644-002. 11 Rear accessories The rear accessories and the conditions in which they are used are defined in TR 4654-300.
