ASHRAE 200-2015 Methods of Testing Chilled Beams.pdf
《ASHRAE 200-2015 Methods of Testing Chilled Beams.pdf》由会员分享,可在线阅读,更多相关《ASHRAE 200-2015 Methods of Testing Chilled Beams.pdf(26页珍藏版)》请在麦多课文档分享上搜索。
1、ANSI/ASHRAE Standard 200-2015Methods of TestingChilled BeamsApproved by ASHRAE on February 27, 2015, and by the American National Standards Institute on March 2, 2015.ASHRAE Standards are scheduled to be updated on a five-year cycle; the date following the Standard number is the year ofASHRAE approv
2、al. The latest edition of an ASHRAE Standard may be purchased on the ASHRAE website (www.ashrae.org)or from ASHRAE Customer Service, 1791 Tullie Circle, NE, Atlanta, GA 30329-2305. E-mail: ordersashrae.org. Fax: 678-539-2129. Telephone: 404-636-8400 (worldwide) or toll free 1-800-527-4723 (for order
3、s in US and Canada). For reprintpermission, go to www.ashrae.org/permissions. 2015 ASHRAE ISSN 1041-2336SPECIAL NOTEThis American National Standard (ANS) is a national voluntary consensus Standard developed under the auspices of ASHRAE. Consensus is definedby the American National Standards Institut
4、e (ANSI), of which ASHRAE is a member and which has approved this Standard as an ANS, as“substantial agreement reached by directly and materially affected interest categories. This signifies the concurrence of more than a simple majority,but not necessarily unanimity. Consensus requires that all vie
5、ws and objections be considered, and that an effort be made toward their resolution.”Compliance with this Standard is voluntary until and unless a legal jurisdiction makes compliance mandatory through legislation. ASHRAE obtains consensus through participation of its national and international membe
6、rs, associated societies, and public review.ASHRAE Standards are prepared by a Project Committee appointed specifically for the purpose of writing the Standard. The ProjectCommittee Chair and Vice-Chair must be members of ASHRAE; while other committee members may or may not be ASHRAE members, allmus
7、t be technically qualified in the subject area of the Standard. Every effort is made to balance the concerned interests on all Project Committees. The Senior Manager of Standards of ASHRAE should be contacted fora. interpretation of the contents of this Standard,b. participation in the next review o
8、f the Standard,c. offering constructive criticism for improving the Standard, ord. permission to reprint portions of the Standard.DISCLAIMERASHRAE uses its best efforts to promulgate Standards and Guidelines for the benefit of the public in light of available information and acceptedindustry practic
9、es. However, ASHRAE does not guarantee, certify, or assure the safety or performance of any products, components, or systemstested, installed, or operated in accordance with ASHRAEs Standards or Guidelines or that any tests conducted under its Standards or Guidelineswill be nonhazardous or free from
10、 risk.ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDSASHRAE Standards and Guidelines are established to assist industry and the public by offering a uniform method of testing for rating purposes, bysuggesting safe practices in designing and installing equipment, by providing proper definitions of
11、this equipment, and by providing other informationthat may serve to guide the industry. The creation of ASHRAE Standards and Guidelines is determined by the need for them, and conformanceto them is completely voluntary.In referring to this Standard or Guideline and in marking of equipment and in adv
12、ertising, no claim shall be made, either stated or implied,that the product has been approved by ASHRAE.ASHRAE Standard Project Committee 200Cognizant TC: TC 5.3, Room Air DistributionSPLS Liaison: Srinivas KatipamulaJerry M. Sipes, Chair* Jonathon R. Giles* Steven J. OBrien*Kenneth J. Loudermilk, V
13、ice Chair* Daniel L. Hahne* Mary OpalkaMarc Duy-Minh Neufcourt, Secretary* Michael J. Holland* R. Gaylon Richardson*Darren S. Alexander* David A. John* Robert H. Thompson*Michael Bejrowski* Michael J. Langton*Dan W. Dupaix Andrey Livchak* Denotes members of voting status when the document was approv
14、ed for publicationASHRAE STANDARDS COMMITTEE 20142015Richard L. Hall, Chair James W. Earley, Jr. Mark P. ModeraDouglass T. Reindl, Vice-Chair Steven J. Emmerich Cyrus H. NasseriJoseph R. Anderson Patricia T. Graef Heather L. PlattJames Dale Aswegan Rita M. Harrold Peter SimmondsCharles S. Barnaby Ad
15、am W. Hinge Wayne H. Stoppelmoor, Jr.Donald M. Brundage Srinivas Katipamula Jack H. ZarourJohn A. Clark Debra H. Kennoy Julia A. Keen, BOD ExOWaller S. Clements Malcolm D. Knight Bjarne Wilkens Olesen, CODavid R. Conover Rick A. LarsonJohn F. Dunlap Arsen K. MelkovStephanie C. Reiniche, Senior Manag
16、er of StandardsCONTENTSANSI/ASHRAE Standard 200-2015,Methods of Testing Chilled BeamsSECTION PAGEForeword .21 Purpose.22 Scope23 Definitions and Symbols24 Instrumentation and Facilities .35 Test Methods 56 Reporting.107 Normative References 13Informative Annex A: Governing Equations for Chilled Beam
17、s.14Informative Annex B: Primary Airflow Measurement.16Informative Annex C: Electric Heated Person Simulators.18Informative Annex D: Radiant Shielded Temperature Sensor 20Normative Annex E: Measurement of Induced Airflow Rates and Calculation of Induction Ratios.21NOTEApproved addenda, errata, or in
18、terpretations for this standard can be downloaded free of charge from the ASHRAEWeb site at www.ashrae.org/technology. 2015 ASHRAE1791 Tullie Circle NE Atlanta, GA 30329 www.ashrae.org All rights reserved.ASHRAE is a registered trademark of the American Society of Heating, Refrigerating and Air-Cond
19、itioning Engineers, Inc.ANSI is a registered trademark of the American National Standards Institute.2 ANSI/ASHRAE Standard 200-2015(This foreword is not part of this standard. It is merelyinformative and does not contain requirements necessaryfor conformance to the standard. It has not been pro-cess
20、ed according to the ANSI requirements for a standardand may contain material that has not been subject topublic review or a consensus process. Unresolved objec-tors on informative material are not offered the right toappeal at ASHRAE or ANSI.)FOREWORDASHRAE Standard 200 was written at the request of
21、 the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) toprovide test instrumentation and facilities, installation meth-ods, and procedures for determining the capacity and relatedperformance of chilled beams. Procedures provided in thisstandard apply to active chilled beams.This standar
22、d was prepared in cooperation with the AHRIChilled Beams Section, and it is referenced in AHRI Standards1240 (I-P) and 1241 (SI), Performance Rating of ActiveChilled Beams, as the method of test for the AHRI ActiveChilled Beam (ACB) certification program.This standard was prepared by ASHRAE Standard
23、 Proj-ect Committee (SPC) 200. The cognizant technical committeeis ASHRAE TC 5.3, Room Air Distribution.1. PURPOSE1.1 To define laboratory methods of testing chilled beams todetermine performance.2. SCOPE2.1 Defines laboratory methods of testing chilled beams todetermine performance.2.2 Specifies te
24、st instrumentation, facilities, installation meth-ods, and procedures for determining the performance ofchilled beams.3. DEFINITIONS AND SYMBOLS3.1 Definitions Unless otherwise specified, refer to defini-tions listed on the ASHRAE Terminology website.active chilled beam: an air induction and diffusi
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASHRAE2002015METHODSOFTESTINGCHILLEDBEAMSPDF

链接地址:http://www.mydoc123.com/p-454237.html