1、ASME A112.19.7-2012/CSA B45.10-12Hydromassage bathtub systemsLegal Notice for Harmonized StandardJointly Developed by ASME and CSAIntellectual property rights and ownershipAs between The American Society of Mechanical Engineers (ASME) and Canadian Standards Association (CSA) (collectively ASME and C
2、SA) and the users of this document (whether it be in printed or electronic form), ASME and CSA are the joint owners of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and all inventions and trade secrets that may be contained i
3、n this document, whether or not such inventions and trade secrets are protected by patents and applications for patents. The unauthorized use, modification, copying, or disclosure of this document may violate laws that protect the intellectual property of ASME and CSA and may give rise to a right in
4、 ASME and CSA to seek legal redress for such use, modification, copying, or disclosure. ASME and CSA reserve all intellectual property rights in this document.Disclaimer and exclusion of liabilityThis document is provided without any representations, warranties, or conditions of any kind, express or
5、 implied, including, without limitation, implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringement of any third partys intellectual property rights. ASME and CSA do not warrant the accuracy, completeness, or curre
6、ncy of any of the information published in this document. ASME and CSA make no representations or warranties regarding this documents compliance with any applicable statute, rule, or regulation.IN NO EVENT SHALL ASME AND CSA, THEIR RESPECTIVE VOLUNTEERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIE
7、S, OR THEIR EMPLOYEES, DIRECTORS, OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED, INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUPTION, LOST OR DAMAGED DATA, OR ANY OTHER COMMERC
8、IAL OR ECONOMIC LOSS, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR ANY OTHER THEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF ASME OR CSA HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES
9、.In publishing and making this document available, ASME and CSA are not undertaking to render professional or other services for or on behalf of any person or entity or to perform any duty owed by any person or entity to another person or entity. The information in this document is directed to those
10、 who have the appropriate degree of experience to use and apply its contents, and ASME and CSA accept no responsibility whatsoever arising in any way from any and all use of or reliance on the information contained in this document. ASME and CSA have no power, nor do they undertake, to enforce compl
11、iance with the contents of the standards or other documents they jointly publish. Authorized use of this documentThis document is being provided by ASME and CSA for informational and non-commercial use only. The user of this document is authorized to do only the following:If this document is in elec
12、tronic form:. load this document onto a computer for the sole purpose of reviewing it;. search and browse this document; and. print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by ASME and CSA to hav
13、e such copies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit others to. alter this document in any way or remove this Legal Notice from the attached standard;. sell this document without authorization from ASME and CSA; or. make an electronic c
14、opy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load or use this document or make any copies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this document constitute
15、s your acceptance of the terms and conditions of this Legal Notice.CSA Standards Update ServiceASME A112.19.7-2012/CSA B45.10-12March 2012Title: Hydromassage bathtub systemsPagination: 37 pages (xiii preliminary and 24 text), each dated March 2012To register for e-mail notification about any updates
16、 to this publicationgo on-line to shop.csa.caclick on E-mail Services under MY ACCOUNTclick on CSA Standards Update ServiceThe List ID that you will need to register for updates to this publication is 2421820.If you require assistance, please e-mail techsupportcsa.ca or call 416-747-2233.Visit CSAs
17、policy on privacy at csagroup.org/legal to find out how we protect your personal information.INTENTIONALLY LEFT BLANKASME A112.19.7-2012/CSA B45.10-12Hydromassage bathtub systemsASME/CSA StandardPublished in March 2012 by Canadian Standards AssociationA not-for-profit private sector organization5060
18、 Spectrum Way, Suite 100Mississauga, Ontario, CanadaL4W 5N61-800-463-6727 416-747-4044Visit the CSA Online Store at shop.csa.caISBN 978-1-55491-537-8 Canadian Standards Association 2012All rights reserved. No part of this publication may be reproduced in any form whatsoever without the prior permiss
19、ion of the publisher.Commitment for AmendmentsThis Standard is issued jointly by The American Society of Mechanical Engineers (ASME) and the Canadian Standards Association (CSA). Amendments to this Standard will be made only after processing according to the Standards writing procedures of both ASME
20、 and CSA.The American Society of Mechanical Engineers (ASME) Three Park AvenueNew York, NY 10016-5990USAwww.asme.orgISBN 978-0-7918-3420-6 Copyright 2012The 2012 edition of this Standard is being issued with an automatic addenda subscription service. The use of addenda allows revisions made in respo
21、nse to public review comments or committee actions to be published as necessary.October 2011 iiiContents The American Society of Mechanical Engineers Canadian Standards AssociationHydromassage bathtub systemsASME Standards Committee on Plumbing Materials and Equipment vASME Project Team 19.7 Hydroma
22、ssage Bathtubs viiCSA Technical Committee on Plumbing Fixtures viiiASME/CSA Joint Harmonization Task Group on Plumbing Fixtures xiPreface xii1Scope 12 Reference publications 13 Definitions and abbreviations 33.1 Definitions 33.2 Abbreviations 44 General requirements 44.1 Electrical components 44.2 P
23、lumbing fixtures 44.3 Plumbing supply fittings 44.4 Piping and tubing 44.4.1 Copper 44.4.2 Plastic 44.4.3 Flexible hoses 44.4.4 Alternative materials 44.5 Solvent cements for use with flexible piping 54.6 Suction fittings 54.7 Circulation system installation 54.8 Pump or blower 54.9 Field-assembled
24、or retrofitted bathtubs 54.10 Backflow prevention 54.11 Suction fitting assemblies (whirlpool bathtubs only) 54.12 Suction fitting cover apertures 65 Testing 65.1 Installation 65.2 Water retention in whirlpool or air-jetted bathtubs 65.2.1 General 65.2.2 Preconditioning 65.2.3 Performance 65.2.4 Chl
25、orine test 65.2.5 Volumetric test 95.3 Physical tests for suction fittings (whirlpool bathtubs only) 105.3.1 General 105.3.2 Test conditions 105.3.3 Surface exhaustion 105.3.4 Deflection test 115.3.5 Shear load test 115.3.6 Vacuum and point impact test 11 The American Society of Mechanical Engineers
26、ASME A112.19.7-2011/CSA B45.10-11 Canadian Standards Associationiv October 20115.4 Hair entanglement test for suction fittings 125.4.1 General 125.4.2 Test preparation 125.4.3 Test with the fitting affixed to the test fixture 135.4.4 Test with the fitting affixed to the bathtub 136 Markings and inst
27、allation instructions 146.1 General 146.2 Factory-assembled whirlpool or air-jetted bathtubs 146.3 Field assemblies and retrofitted bathtubs (whirlpool bathtubs only) 146.4 Suction fittings (whirlpool bathtubs only) 156.5 Installation instructions 156.5.1 General 156.5.2 Factory-assembled whirlpool
28、or air-jetted bathtubs 156.5.3 Roughing-in dimensions 156.5.4 Service access and controls 156.5.5 Electrical 156.5.6 Operation, use, and care instructions 156.5.7 Flushing instructions 15AnnexesA (informative) Unit conversion and rounding criteria 23B (normative) Random sampling method for testing b
29、athtubs 24Tables1 Preparation of chlorine solution 82 Residual water comparison 9Figures1 Shear load test 162 Test tank 173 Baffles 184 Pull structure 195 Test equipment with puller assembly 206 Test cylinder assembly 217 Test procedure 22 The American Society of Mechanical Engineers Canadian Standa
30、rds AssociationHydromassage bathtub systemsMarch 2012 vASME Standards Committee on Plumbing Materials and EquipmentD.W. Viola IAPMO,Mokena, Illinois, USAChairS.A. Remedios Delta Faucet Company,Indianapolis, Indiana, USAVice-ChairR.H. Ackroyd Rand Technical Consulting,Newburyport, Massachusetts, USAS
31、.F. Aridi NSF International,Ann Arbor, Michigan, USAJ.A. Ballanco JB Engineering however, they should not contain proprietary names or information.ASME procedures provide for reconsideration of any interpretation when or if additional information that might affect an interpretation is available. Fur
32、ther, persons aggrieved by an interpretation may appeal to the cognizant ASME Committee.Interpretations are published on the ASME Web site under the Committee Pages at http:/cstools.asme.org/ as they are issued. The American Society of Mechanical Engineers Canadian Standards AssociationHydromassage
33、bathtub systemsMarch 2012 xiiiCSA Notes:(1) Use of the singular does not exclude the plural (and vice versa) when the sense allows.(2) Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Sta
34、ndard to judge its suitability for their particular purpose.(3) This publication was developed by consensus, which is defined by CSA Policy governing standardization Code of good practice for standardization as “substantial agreement. Consensus implies much more than a simple majority, but not neces
35、sarily unanimity”. It is consistent with this definition that a member may be included in the Technical Committee list and yet not be in full agreement with all clauses of this publication.(4) To submit a request for interpretation of CSA Standards, please send the following information to inquiries
36、csa.ca and include “Request for interpretation” in the subject line:(a) define the problem, making reference to the specific clause, and, where appropriate, include an illustrative sketch;(b) provide an explanation of circumstances surrounding the actual field condition; and(c) where possible, phras
37、e the request in such a way that a specific “yes” or “no” answer will address the issue.Committee interpretations are processed in accordance with the CSA Directives and guidelines governing standardization and are published in CSAs periodical Info Update, which is available on the CSA website at ht
38、tp:/standardsactivities.csa.ca.(5) CSA Standards are subject to periodic review, and suggestions for their improvement will be referred to the appropriate committee. To submit a proposal for change to CSA Standards, please send the following information to inquiriescsa.ca and include “Proposal for c
39、hange” in the subject line:(a) Standard designation (number);(b) relevant clause, table, and/or figure number;(c) wording of the proposed change; and(d) rationale for the change.(6) Attention is drawn to the possibility that some of the elements of this Standard may be the subject of patent rights.
40、CSA is not to be held responsible for identifying any or all such patent rights. Users of this Standard are expressly advised that determination of the validity of any such patent rights is entirely their own responsibility. The American Society of Mechanical Engineers Canadian Standards Association
41、Hydromassage bathtub systemsMarch 2012 1ASME A112.19.7-2012/CSA B45.10-12Hydromassage bathtub systems1Scope1.1This Standard specifies general requirements, test methods, and markings for whirlpool and air-jetted bathtubs and suction fittings used in hydromassage bathtub systems that incorporate a ba
42、thtub and circulation pump. The circulation pump can be with or without (a) a piping system; and(b) induction of air (which can be achieved by integral suction or through an air pump).1.2This Standard does not cover(a)spas and hot tubs covered in CAN/CSA-C22.2 No. 218.1 and UL 1563;(b) portable hydr
43、omassage products covered in CSA Electrical Bulletin 1268 and CSA Electrical Bulletin 1270; and(c) hydrotherapy bathtubs or patient bathing systems for institutional use.1.3In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to c
44、omply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard.Notes accompanying clauses do not include requirements or alternative requirements; t
45、he purpose of a note accompanying a clause is to separate from the text explanatory or informative material.Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define t
46、heir application.1.4SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses.The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement syst
47、ems can result in non-conformance with this Standard.All references to gallons are to U.S. gallons.For information on the conversion criteria used in this Standard, see Annex A.2 Reference publicationsThis Standard refers to the following publications, and where such reference is made, it shall be t
48、o the edition listed below, including all amendments published thereto.ASME/CSA (The American Society of Mechanical Engineers/Canadian Standards Association)ASME A112.18.1-2011/CAN/CSA-B125.1-11Plumbing supply fittings The American Society of Mechanical EngineersASME A112.19.7-2012/CSA B45.10-12 Can
49、adian Standards Association2 March 2012ASME A112.18.2/CSA-B125.2-11Plumbing waste fittingsASME A112.19.1-2008/CSA B45.2-08Enamelled cast iron and enamelled steel plumbing fixturesCSA (Canadian Standards Association)CAN/CSA-B45.5-02 (R2008)Plastic plumbing fixtures (a part of CAN/CSA-B45 Series-02 (R2008), Plumbing fixtures)B137 Series-09Thermoplastic pressure piping compendiumB137.1-09Polythylene (PE) pipe, tubing, and fittings for cold-water pressure services B137.5-09Crosslined polythylene (PEX) tubing systems for pressure applicatio
